Jump to content

peacemaker's Office Nano V4


peacemaker
 Share

Recommended Posts

  • SRC Member

Yo~ :heh:

My office reef has been expanding for quite a bit, and I find it a little taxing to manage 2 tanks of similar size (one at home), so I decided to downsize. Details of the tank and setup are as follows:

Dimensions: 18" x 18" x 12" with 6" IOS (display area = 18" x 12" x 12"), 3-sided crystal glass, 6mm glass thickness

Lighting: LumenAqua Max 300 LEDs & 2x CREE Royal Blue LED moonlights.

Filtration: Filter wool (mechanical), live rocks, live sand & Biohomme (biological), carbon (chemical)

Skimmer: Bubble Magus NAC 3.5 Cone skimmer No skimmer at this present moment

Temperature control: Office A/C during office hours, Sunon fan Ice Probe on digital timer during off-office hours and weekends

Nutrient export: Cheato, lit by JBJ Nano Glo LEDs (may explore algae scrubber options should there be a need)

Auto Top Off: Tunze Osmolator Universal 3155 with reservoir jerry can

Wave maker: Ecotech Marine Vortech MP10

Return pump: Ehiem Compact 1000

Dosing plans: Grotech Coral A, B, & C, Brightwell Aquatics Coral Amino, Tropic Marin Iodine, Sodium Ascorbate (as needed)

Currently going through cycling. Dosed Prodibio Bio Digest & Bio Tim and dumped a market prawn to kick start the cycle. Stocking plans are a pair of Yasha gobies with randal's pistol shrimp, yellow neon goby, green banded goby, and prolly a Helfrich goby. Clean up crew will consist of nassarius and turbo snails. I might add a hermit and a pom pom crab.

Some photos of the tank...

post-13914-0-82741300-1311775032_thumb.j

post-13914-0-72357900-1311775056_thumb.j

post-13914-0-44929400-1311775062_thumb.j

post-13914-0-37584000-1311775067_thumb.j

Link to comment
Share on other sites

  • Replies 131
  • Created
  • Last Reply

Top Posters In This Topic

  • SRC Member

I did a simple DIY burrow for the Yashas with PVC elbows, pipe and T-joint. Kneaded and stuck some epoxy to the entrance of the burrow to break the shape so that it doesn't appear too artificially constructed. Glued some sand to the epoxy for added camouflage.

post-13914-0-00668500-1311775153_thumb.j

post-13914-0-15005600-1311775160_thumb.j

post-13914-0-06336800-1311775164_thumb.j

Link to comment
Share on other sites

  • SRC Member

innovative! saw the dumdum in a tank on rc b4, cute!

btw, thanks for sharing the brilliant idea on the diy burrow! :thumbsup:

Link to comment
Share on other sites

  • SRC Member

Unique set-up with a ancient outlook. :welldone:

-Main Display Tank : 2ft x 1.5ft x 1.5ft c/w sump tank cabinet (Set up by aquarium artist)

-Lightings : 4 sets of 1.5ft mini aqua lumen LED lights (7 high power led 15W)

-Chiller: 1/4HP artica chiller with a standby of HC-100A

-Skimmer : Bubble Magnus 3 (cone)

-Phosphate Reactor

-NP Bio-pellet D&D onceanic hang-on reactor

-Wavemaker : MP10

-Temperature mointor : American Wireless pinpoint thermometer

Link to comment
Share on other sites

YJ, very sweeeeee !!!!:welldone:

you are defintely a nano specialist now.. :)

thumbs up on the burrow too. great planning & consideration for the fishes.

I like the shimmering effect created by the water surface movement .

too bad my office has very frequent power shutdown. Else I would set up one too !

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

Nice looking tank . you are not running a skimmer ?

Larry... :chair: nvr read properly... => Skimmer: Bubble Magus NAC 3.5 Cone skimmer

fine you 1 cup of kopi !

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member

YJ, very sweeeeee !!!!:welldone:

you are defintely a nano specialist now.. :)

thumbs up on the burrow too. great planning & consideration for the fishes.

I like the shimmering effect created by the water surface movement .

too bad my office has very frequent power shutdown. Else I would set up one too !

Hey hey! It is very difficult to take a good picture with all that shimmering. The LumenAqua Max uses a thick sheet of acrylic to act as a light diffuser, but the LEDs are still very pin-point, hence the shimmer. Quite glaring actually, with the white sand... not sure how long the sand will stay white! :lol:

Link to comment
Share on other sites

  • SRC Member

Nice looking tank . you are not running a skimmer ?

Thanks for dropping by, Larry! I catered the center section of the filter compartment for the skimmer. Fits the BM NAC 3.5 nicely. I do have some micro bubble issues at present... hopefully it will be gone after it runs in.

Link to comment
Share on other sites

  • SRC Supporter

Thanks for dropping by, Larry! I catered the center section of the filter compartment for the skimmer. Fits the BM NAC 3.5 nicely. I do have some micro bubble issues at present... hopefully it will be gone after it runs in.

Opps.. Sorry that i miss that lol. By the look and workmanship of the tank, i guess the tank is from Vincent Aquarium artist ?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      加拿大保录取_SFU毕业证成绩单——Q微信751558146西蒙菲莎大学学位证_成绩单_办理SFU文凭学历认证Simon Fraser University

    2. 0

      美国学位证_Brandeis毕业证成绩单+Q微信751558146布兰迪斯大学学位证_成绩单_办理Brandeis文凭学历认证Brandeis University

    3. 0

      加拿大保录取_UBC毕业证成绩单——Q微信751558146英属哥伦比亚大学学位证_成绩单_办理UBC文凭学历认证University of British Columbia

    4. 0

      美国学位证_PSU毕业证成绩单+Q微信751558146宾州州立大学学位证_成绩单_办理PSU文凭学历认证Penn State University Park

×
×
  • Create New...