Jump to content

STR Marine Reef Tank


stmomo
 Share

Recommended Posts

FINALLY MY TANK IS HERE........

Hi Guys, had been waiting for almost 6 weeks and now my tank is here under close monitoring for leak since Saturday 16072011.

Thanks to all the Bros and Sis here who gave me good advice and sharing yr precious knowledge with me.

Had been reading and planning for about 5 months and now is time to kick start my long awaited dream project.......

I will start posting pictures soon and hope that you can give me yr comment and advice and hopefully I can share with you about the setup.

Thanks again..... really appreciate it...... pls enjoy.... :)

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites

  • Replies 88
  • Created
  • Last Reply

Top Posters In This Topic

Delivery of the Tank....... :yahoo:

post-19125-0-21896500-1310998510_thumb.j

post-19125-0-59969800-1310998522_thumb.j

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites

N30 @ Work........ :thumbsup:

post-19125-0-23029600-1310998600_thumb.j

post-19125-0-69361400-1310998616_thumb.j

post-19125-0-09709600-1310998626_thumb.j

post-19125-0-93761800-1310998641_thumb.j

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites

3hrs.... All Done..... :groupwavereversed:

post-19125-0-49622200-1310998839_thumb.j

post-19125-0-43053300-1310998852_thumb.j

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites

Close view of the Sump Tank...... :)

1st Compartment will be 6" DSB, 2nd Compartmnt will be Skimmer and maybe the reactor.... lastly the return and chiller pump.....

post-19125-0-87691100-1310999107_thumb.j

post-19125-0-06985000-1310999121_thumb.j

post-19125-0-99060500-1310999131_thumb.j

post-19125-0-64826700-1310999145_thumb.j

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites

Main Specs of STR Tank..... :)

post-19125-0-94638100-1310999348_thumb.j

post-19125-0-56767200-1310999396_thumb.j

post-19125-0-00866500-1310999433_thumb.j

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites

Some Accessories to share....... :)

post-19125-0-04774900-1310999528_thumb.j

post-19125-0-44677500-1310999551_thumb.j

post-19125-0-30727500-1310999567_thumb.j

post-19125-0-92829600-1310999586_thumb.j

post-19125-0-60823400-1310999602_thumb.j

post-19125-0-66199800-1310999632_thumb.j

post-19125-0-55421500-1310999655_thumb.j

post-19125-0-52779500-1310999672_thumb.j

post-19125-0-55845200-1310999689_thumb.j

post-19125-0-23212500-1310999704_thumb.j

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites

Sump Tank With DI Water......

post-19125-0-01803000-1310999807_thumb.j

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites

  • SRC Member

hope u dun mind...

if possible.. dun keep chiller inside cabinet...

causes bad smell in the cabinet, temp inside will be warm = chiller kick in more often...

overall.. bad idea to keep chiller inside cabinet...

My 3ft tank

Dimension --> 3ftx1.5ftx2ft

Ehiem 1262 return

Ehiem 1260

Artica 1/5hp Chiller

Tunze 6055 + 7091 single controller

EcoTech Marine Vortech MP40W

Royal Exclusive Mini BubbleKing 160

Lumenarc 250watt 10K BLV

02x Giesemann T5 39watt (blue + Actinic)

Deltec 501 CR

Link to comment
Share on other sites

Not using filter Sock? I dont see anything to hold up the sock .

Ya.... at the moment no..... using filter wool..... for the next few weeks i will be testing out few filtration methods before deciding what to do for the pre filter.... will test out filter socks as well..... thanks bro...... :)

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites

I believe your chiller outlet is back into the sump? Try to get a filter sock for the outlet and put the outlet before the return pump compartment to minimize microb bubble..

Thanks for the advice bro.... will take note on that..... yes... is back into the return pump compartment....

after some though from yr advice.... most ppbly i will put it in the skimmer compartment and place filter wool in between the 2nd and the last compartment..... thanks bro... :)

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites

Oh btw, y dont u put ur plug at e chiller compartment instead of e sump compartment. Guess it will be better. Just my 2cent... :P :P :P

Thanks for the encouragement bro.... yes.... there will be another 4 gang power extension in the chiller compartment... not install yet..... keke.... thanks bro..... :)

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites

Exciting start! Keep the updates coming..

Thanks bro..... really excited about it..... i guess the best part of this hobby is right now....... kekeke..... :)

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites

hope u dun mind...

if possible.. dun keep chiller inside cabinet...

causes bad smell in the cabinet, temp inside will be warm = chiller kick in more often...

overall.. bad idea to keep chiller inside cabinet...

No problem bro..... thanks for sharing..... during my initial planning my chiller is to be install outside but due to too many constraint, like machiem CO not happy with the look of the chiller outside the beautiful cabinet she design and my playful kid playing with the setting of the chiller.... etc, i decided to put it in the cabinet... sigh.....

let me try out and see what can be done if the fan inside the cabinet did not work out..... thanks again bro.... :)

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites

nicely done

is your chiller in out at the same compartment?

Thanks for the compliment bro..... initial plan yes... but now thinking of returning to the chiller compartment..... and will put filter wool in between the skimmer and return pump compartment.... any advice? thanks bro.... :)

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites

if your water volume is larger than 100g, performance is similar but more frequent kick in

tested with my 4 footer

same compartment, lights off, kick in time 40 mins, rest 70 mins

different compartment, lights off, kick in time 60 mins, rest 120mins

you will notice more frequent kick in when lights on

HTH

cheers

Link to comment
Share on other sites

Camping here for exciting updates.... :heh:

okok.... hope u enjoy..... thanks bro.... :)

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...