Jump to content

skimmer recommendation


Recommended Posts

small beckett wif a rio pump? old technology but proven..my 2 cents


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

HOB Reef Octopus OTP-1000

AquaC Nano Remora Hang-On Protein Skimmer

Reefing since 2003
 4ft x 2ft x 2ft Mixed Reef (BB):-
50 Gal Sump,

Apex Controlled System (Lab grade),
Deltec SC1455 Protein Skimmer,
Vortech MP40wQD,

Jebao RW-15

Maxspect Razor 320w
Eheim 1260 Return Pump,
Hailea HS-66A 1/4HP chiller,
TLF Reactor 150, running HydroCarbon 



 

Link to comment
Share on other sites

Thanks all for the reply and sorry for not specifying that I need HOB. Now looking at Reef Octopus BH 1000 Hang

on Back Protein Skimmer. Where to buy this and how much?

Btw, I also saw WeiPro at Ah Beng shop at 68$ only.. Should I consider it?

Link to comment
Share on other sites

U can go iwarna to buy.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

  • 4 weeks later...

Hi Guys,

After doing some research on the BH-1000 I found out that it's an overkill for my 2 ft tank (20 gallons). Some sites say that over skimming is also not good because it will take away the nutrients needed by the corals.

I tried looking for the smaller version BH-100 but looks like it's not available anymore. Is there an alternative brand that you guys can recommend? I think Deltec is out of my budget :(. What I'm thinking is if I go with the BH-1000 I'll just run it with a timer running 8 hrs per day. Is that a good idea?

Link to comment
Share on other sites

  • SRC Member

Hi Guys,

After doing some research on the BH-1000 I found out that it's an overkill for my 2 ft tank (20 gallons). Some sites say that over skimming is also not good because it will take away the nutrients needed by the corals.

I tried looking for the smaller version BH-100 but looks like it's not available anymore. Is there an alternative brand that you guys can recommend? I think Deltec is out of my budget :(. What I'm thinking is if I go with the BH-1000 I'll just run it with a timer running 8 hrs per day. Is that a good idea?

there is no such thing as overskim...this has been a talking point for years...and there are no evidence to proof.

just go with BH-1000...i'm using this for my 2.5ft...

l7304smr.jpg
Link to comment
Share on other sites

Look at BM QQ. Running on my 24g and seems good.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Can get from iwarna or u pm dr evil as he is the agent.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Selling corals Zoas

    2. 1

      Coral Decom Sale

    3. 0

      WTS: Yellow oxide Zoa

    4. 1

      Coral Decom Sale

×
×
  • Create New...