SRC Member tunicate Posted March 27, 2011 Author SRC Member Share Posted March 27, 2011 Thanks bro. Quote Link to comment Share on other sites More sharing options...
SRC Member tunicate Posted March 27, 2011 Author SRC Member Share Posted March 27, 2011 For continuity sake, I'm adding to this thread as follows: (I know this should rightfully be in the DIY forum. ) On a quiet Sunday afternoon with nothing much to do, I've done this to my NAC QQ collection cup. BTW, both bits came from my NAC5 skimmer. Just drill hole, cut to size, silicon. Voila! Quote Link to comment Share on other sites More sharing options...
SRC Member peacemaker Posted March 27, 2011 SRC Member Share Posted March 27, 2011 On the contrary, I shorten the tube of the drain outlet and put the stopper there. It forces me to clean the skimmer cup regularly, thus enabling better skimming efficiency. Personal preference though. Quote Link to comment Share on other sites More sharing options...
SRC Member peacemaker Posted March 27, 2011 SRC Member Share Posted March 27, 2011 Oh... and HAPPY BIRTHDAY~ Quote Link to comment Share on other sites More sharing options...
SRC Member tunicate Posted March 28, 2011 Author SRC Member Share Posted March 28, 2011 Thanks again. Quote Link to comment Share on other sites More sharing options...
Tian85 Posted March 28, 2011 Share Posted March 28, 2011 What LS you have in your tank? The amount of skim mate produce is a lot with very good colours. Quote Link to comment Share on other sites More sharing options...
SRC Member tunicate Posted March 28, 2011 Author SRC Member Share Posted March 28, 2011 Hi Tian, LS listing is in my 1st post. Quote Link to comment Share on other sites More sharing options...
SRC Member onizukaa Posted March 28, 2011 SRC Member Share Posted March 28, 2011 wow nice skimmed kopi o~ thanks for review and your effort in sharing! Quote Link to comment Share on other sites More sharing options...
SRC Member straydum Posted March 28, 2011 SRC Member Share Posted March 28, 2011 good review bro i don't wish to be a wet blanket but i think its good that it should be stated that this skimmer in almost 2 times underpowered (since its rated 25g) for your tank volume (>55g) thats why it is able to skim out as such. such skimmate would be easily removed in probably a much shorter time using an appropriate skimmer like your nac 5. when using a lower rated skimmer for a larger tank, sure one'd be able to see kopi-o daily which would lead to thinking that the skimmer is great in removing what it should but in fact the rate of removal may not be able to catch up to the what is being produced in the tank. so to all potential owners do reconsider before jumping in for this skimmer. just my 0.02, please don't take this the wrong way Quote Link to comment Share on other sites More sharing options...
SRC Member tunicate Posted March 28, 2011 Author SRC Member Share Posted March 28, 2011 Yes straydum, thanks for pointing that out. BTW, I've tried a Weipro on this tank before, its performance is nowhere close to NAC QQ. Quote Link to comment Share on other sites More sharing options...
SRC Member straydum Posted March 28, 2011 SRC Member Share Posted March 28, 2011 a normal weipro wouldn't match to a bm definately, unless you mod it specially :heh: Quote Link to comment Share on other sites More sharing options...
SRC Member tunicate Posted March 29, 2011 Author SRC Member Share Posted March 29, 2011 No problem bro. It's my pleasure. Quote Link to comment Share on other sites More sharing options...
SRC Member inwear Posted October 8, 2011 SRC Member Share Posted October 8, 2011 Day 4 Bro , where and how much did u pay for it... Upz for u Quote Link to comment Share on other sites More sharing options...
llecaroz Posted June 21, 2012 Share Posted June 21, 2012 Hi tunicate & all, I read with attention your article. As owner of a french material blog testing reef keeping products, I write some article on products unboxing (like for example this Aqua Excel AE ZPS 60 Skimmer http://reefandthecity.com/2012/05/08/essai-de-lecumeur-aqua-excel-ae-zps60/ ). In fact, as you will see on my blog, I have also a nano reef with exactly the same skimmer as you : the NAC New QQ (in fact your skimmer is not a NAC QQ but a NAC New QQ). I am going to write a review on this skimmer, but I forgot to take some picture of the unboxing . So instead of stolling your pictures, I would like your autorisation/courtesy to use them in my article ? (I was searching for unboxing picture since fiew weeks & also asked directly to bubble magus but no an answer). For sure, I will add a link to this really interesting forum & article & also add your username & special thx to you in the article. Thx in advance for your feedback & coming answers & dear administrators, let me apoligize for introducing myself by this way. Best Regards Louis Quote Link to comment Share on other sites More sharing options...
Sassy Posted June 29, 2012 Share Posted June 29, 2012 How do you make adjustment to the foam level? Mine bubble magus skimmer, the foam did not reach the collection cup, care to share your experience? thanks. Quote Link to comment Share on other sites More sharing options...
VelvetAirwaves Posted August 13, 2012 Share Posted August 13, 2012 Sassy, if you turn the return tube, it will either increase or decrease the water level inside the skimmer On a side note, i just got a bm qq myself, got a heckload of microbubbles currently, is there anyone experiencing the same problem as i am? or should i just let it run in hmmm... Quote Link to comment Share on other sites More sharing options...
王曼綺 Posted September 20, 2012 Share Posted September 20, 2012 I'm having the same issue too, lots of microbubbles, overflowing the collection cup. I've also turned the adjustment pipe to face at 3 o'clock... must i wait for 24hrs before it stabilizes ? Quote Link to comment Share on other sites More sharing options...
blondmyth Posted September 23, 2012 Share Posted September 23, 2012 if the collection cup overflows it means that u need to adjust the water level. adjust the water level so that it just hits the bottom of the collection cup. 1 Quote Link to comment Share on other sites More sharing options...
chickyduck Posted October 21, 2012 Share Posted October 21, 2012 I just bought this skimmer but I am not sure what to do with the ceramic impeller shaft provided. The pump itself came with a metal shaft. Do I try to remove the metal shaft by force and replace it with the ceramic shaft? Quote Link to comment Share on other sites More sharing options...
VelvetAirwaves Posted October 21, 2012 Share Posted October 21, 2012 Hello chickyduck, the impeller should be changed because the skimmer's stock impeller isn't too good as it rusts easily. Quote Link to comment Share on other sites More sharing options...
chickyduck Posted October 21, 2012 Share Posted October 21, 2012 Sorry but how do I go about changing the impeller? Do I just pull the impeller out with brute force? I am worried that I might spoil the pump. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.