Jump to content

Mature tank so skim nothing because water too clean?


mengyang_neo
 Share

Recommended Posts

I bet a lot of reefer will sometime find that how come last time my skimmer skim so much now dun skim much? Is it because my tank have mature and it has found it own balance so there is nothing to skim?

This is what I thought also until recently I found that how come no matter how I tune my skimmer air tube the water volume don't go up. My feeder pump is choke with very small tube worm so the flow rate into my skimmer is greatly reduce. I clear the choking stuffing and the feeder pump start working normally and I get my thick skim back.

For people whose skimmer dun skim much maybe can check whether the feeder pump is choke. All the best. Happy reefing. ;)

5x2.5x1.5ft Rimless Dream Tank (06/03/12)
Skimmer - Reefoctupus

Return Pump - 1 x Eheim 1264, 1 x water blaster 7k
Wavemaker - 2 x mp40es
Chiller - Daikin compressor with coil drop in
Lighting - 4 x 80w T5 Pair 1(6hrs23/12/12),Pair 2(16/06/12312hrs 2 x 80w De-lighting Retrofit (1/3/12) -(15/11/12)6hrs and 2 x 80w De-lighting Retrofit (13/10/12) -6hrs)
Reactor - Dosing pump (01/01/11)


Link to comment
Share on other sites

Lol. Saw yr header, already planned to tease u by saying either yr tank so matured or skimmer too old and true enough, skimmer is too old. Lol.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

lol but it is quite important to do some maintainance once in a while to ensure everything is running smoothly. =)

5x2.5x1.5ft Rimless Dream Tank (06/03/12)
Skimmer - Reefoctupus

Return Pump - 1 x Eheim 1264, 1 x water blaster 7k
Wavemaker - 2 x mp40es
Chiller - Daikin compressor with coil drop in
Lighting - 4 x 80w T5 Pair 1(6hrs23/12/12),Pair 2(16/06/12312hrs 2 x 80w De-lighting Retrofit (1/3/12) -(15/11/12)6hrs and 2 x 80w De-lighting Retrofit (13/10/12) -6hrs)
Reactor - Dosing pump (01/01/11)


Link to comment
Share on other sites

Interesting now there are more thing to take note when doing maintainance. :thumbsup:

5x2.5x1.5ft Rimless Dream Tank (06/03/12)
Skimmer - Reefoctupus

Return Pump - 1 x Eheim 1264, 1 x water blaster 7k
Wavemaker - 2 x mp40es
Chiller - Daikin compressor with coil drop in
Lighting - 4 x 80w T5 Pair 1(6hrs23/12/12),Pair 2(16/06/12312hrs 2 x 80w De-lighting Retrofit (1/3/12) -(15/11/12)6hrs and 2 x 80w De-lighting Retrofit (13/10/12) -6hrs)
Reactor - Dosing pump (01/01/11)


Link to comment
Share on other sites

Like to know how often you all take the whole skimmer out to clean?

collect cup every 2 months

whole skimmer, possibly 6-12mths, mainly the pump and needle wheel as it might get stuck.

FOWLR Tank : 48"x24"x30"

Sump: 36"x18"x20"

Return Pump : Rio 32HF

Skimmer: Reef Octopus DNW-110

Lighting: 150W MH

Link to comment
Share on other sites

collect cup every 2 months

whole skimmer, possibly 6-12mths, mainly the pump and needle wheel as it might get stuck.

Yup it is good to take out the skimmer pump to clean up every 6 mth, for collection cup is up to individual, some wash every 3-4days.

5x2.5x1.5ft Rimless Dream Tank (06/03/12)
Skimmer - Reefoctupus

Return Pump - 1 x Eheim 1264, 1 x water blaster 7k
Wavemaker - 2 x mp40es
Chiller - Daikin compressor with coil drop in
Lighting - 4 x 80w T5 Pair 1(6hrs23/12/12),Pair 2(16/06/12312hrs 2 x 80w De-lighting Retrofit (1/3/12) -(15/11/12)6hrs and 2 x 80w De-lighting Retrofit (13/10/12) -6hrs)
Reactor - Dosing pump (01/01/11)


Link to comment
Share on other sites

  • SRC Member

for me is...the hose connecting the feeder pump came off...

but the strange thing abt my skimmer is....whenever i do WC..it will stop skimming for 30mins - 1hr b4 it starts to skim again...

Same with my skimmer. Take it as normal.

Link to comment
Share on other sites

collect cup every 2 months

whole skimmer, possibly 6-12mths, mainly the pump and needle wheel as it might get stuck.

previously dry skim, need to clean twice a week

now wet skimming, i clean once a week

once every 2 months, must have waste collector liao

Link to comment
Share on other sites

once every 2 months, must have waste collector liao

just being lazy to clean a small mess. Since it has a output, just have a tube to a bottle will do.

FOWLR Tank : 48"x24"x30"

Sump: 36"x18"x20"

Return Pump : Rio 32HF

Skimmer: Reef Octopus DNW-110

Lighting: 150W MH

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...