TECO Chiller

[uLtRaMaN]

Just wondering any bros here using Teco TR20 or other TR models? Need to find out from you guys on the temperature setting for this chiller. If I want the tank water to be 26 degrees, what's the temperature I need to set on the chiller? Cause the temperature of our external thermometer is always different from the chiller, really getting a little confused. Paiseh very new to chillers so very sua ku

[onizukaa]

Just wondering any bros here using Teco TR20 or other TR models? Need to find out from you guys on the temperature setting for this chiller. If I want the tank water to be 26 degrees, what's the temperature I need to set on the chiller? Cause the temperature of our external thermometer is always different from the chiller, really getting a little confused. Paiseh very new to chillers so very sua ku

Push “SET” The display will change from the current

temperature to the set temperature.

3 Push up or down arrow to change temperature.

Using the up and down arrows, set the controller to the desired

water temperature. The temperature will be set automatically

five seconds after you release the button.

4 Once the chiller reaches the set temperature the unit will enter

stand-by mode; both the lights above the temperature display will

be off. When the temperature changes the chiller or heater will

cycle on as appropriate.

[onizukaa]

bro the temp can be set at 26 as the teco chiller differential to kick in is 1 degree above your set temp, set at 26 will kicks in at 27.

[uLtRaMaN]

bro the temp can be set at 26 as the teco chiller differential to kick in is 1 degree above your set temp, set at 26 will kicks in at 27.

thks bro is it better to adjust d chiller temp to b d same as our external thermometer? Or need to set like 0.5 degrees difference?

[tench1]

That depends where u place the external thermometer. Where r u placing the ext thermometer?

[uLtRaMaN]

That depends where u place the external thermometer. Where r u placing the ext thermometer?

In d sump itself

[tench1]

thks bro is it better to adjust d chiller temp to b d same as our external thermometer? Or need to set like 0.5 degrees difference?

Bro, for chiller, most people will choose to set the temp he/she wants the chiller to (kick in) and the temp that will (kick off) at. Example: 28 deg to kick in, and cool to 27 deg.

The external thermometer should just be a guide for you to monitor temp in the main tank.

For myself, i m using a external Thermosat to kick in my chiller at 28, kick off the chiller and pump at 27.

For External Thermometer, i am placing it in main display tank. Its usually 0.2 deg cooler than the sump tank.

hth