Jump to content

evaporation top offs for nano tanks.


Recommended Posts

i'd like to ask if any of you have nano tanks 15 gallons or less, without a sump or auto top off system.

how do you replace water lost to evaporation?

in my 15 gallon tank i used to take a 1 litre cup of freshwater and usually i empty it slowly into the tank, but one day when i was in a rush i just emptied it in a few seconds into the tank. within 24 hours my tank had massive bacterial bloom that would wipe out my entire tank. i'm thinking that the freshwater washed over the live rocks with beneficial bacteria and caused a huge die off?

but anyway after that incident i now use a airline tubing to slowly drip my freshwater into my tank, i also bought more live rocks for more biological filtration.

i just want to confirm if my assumption is correct and what do people with nano tanks without sumps and auto top off systems go about with their top offs?

Link to comment
Share on other sites

  • SRC Member

The freshwater (if you are using tap water aka fresh water), please do de-chlorine it with seachem prime / other products with the same function.

I have always top up for my 12g and 24g with the age water (i store tap water into a bottle and add seachem prime,shake it to mix it and leave it for 2 days to age before using it), i poured in 1.5litre one shot into the IOS of the nano tank everytime and there's no issue with it.

It might be the freshwater issue / other issue that wipes out your entire tank.

Else distill water from supermarkets works the same just pour into the IOS if any, if there is no IOS, i would suggest pouring abit by bit over the wavemaker to spread it evenly

Link to comment
Share on other sites

yea i do dechlorinate with seachem prime.

i don't have IOS, so i dumped it straight in the main tank, think i shuda added it slowly over the wave maker.

right now i do the top offs with a drip system, so shud be ok, if i use drip system still got this problem that means my water got something wrong.

been doing it for 3 weeks already so far still ok.

thanks for all the advice.

Link to comment
Share on other sites

so.... correct me if my conclusion is wrong, but i'm thinking cause most of you guys pour your distilled water in the IOS the water gets mixed up well before it gets into the display tank so there is no adverse effect on the nitrifying bacterias?

has anyone tried to dump freshwater right over a piece of live rock in their display tank? cause that's what i did and i ended up with a bacterial bloom and lost quite a bit.

Link to comment
Share on other sites

i feel so confused because every one seems to just dump in water into the aquarium be it a water change or freshwater top off and be fine, but when i do it something bad happens. :S and i know its definitely not my water that's contaminated cause the fish have been living in it for 6 months.

Link to comment
Share on other sites

  • SRC Member

I just dump my RO DI water directly into my pico .... so far it's almost a month and nothing untoward has happened. :) 1 L in a 15G which is about 57L shouldn't have any adverse effect .. it's only about 1.7% of your total vol... unlikely....

Cheers, ;)

Desi

Sheldon (TBBT): A little misunderstanding? Galileo and the Pope had a little misunderstanding...

Link to comment
Share on other sites

  • SRC Member

Samuelo, u have not really answer if you use RO/DI water.. based on what you have said, it seems like you only dechlorinate the water, which may still contains other metals and harmful particles. So as suggested by most, just use distilled water and sea salt.

Link to comment
Share on other sites

Samuelo, u have not really answer if you use RO/DI water.. based on what you have said, it seems like you only dechlorinate the water, which may still contains other metals and harmful particles. So as suggested by most, just use distilled water and sea salt.

yeah i only dechlorinate, i doubt its me not using distilled or RO water cause my tank has been using this source of water for 6 months without any incident, it was only when i poured in the water in a hurry that it happened. so i can only conclude that its probably pouring in too much water too quickly i guess, but thanks for all the help. i really appreciate it, i've learnt quite a bit.

Link to comment
Share on other sites

  • SRC Member

just for sharing, i have done few setups with nano and 5ft tanks and all i used are just tap water from my kitchen and i always de-cholrinate it and leave it to age before pouring into the tank

Zoas are growing and gsp are spreading like wildfire!

Fish is also ok as i have been topping up with the de-chlorinated tap water for 1 year + without any issue...

not a must to use di/ro water (but if can use, more advisable to use it as my tank does have algae if not maintain properly)

hope samuelo bro tank is up and running strong!

Link to comment
Share on other sites

I truly believe the problem is the water... using for 6 mths doesn't mean anything as it can be culminating till this time when it tips over.. What is the rational of not using RO/DI water?

well, i would love to, but erm, i'm not really working yet so i can't afford the RO/DI unit.

Link to comment
Share on other sites

just for sharing, i have done few setups with nano and 5ft tanks and all i used are just tap water from my kitchen and i always de-cholrinate it and leave it to age before pouring into the tank

Zoas are growing and gsp are spreading like wildfire!

Fish is also ok as i have been topping up with the de-chlorinated tap water for 1 year + without any issue...

not a must to use di/ro water (but if can use, more advisable to use it as my tank does have algae if not maintain properly)

hope samuelo bro tank is up and running strong!

thanks for the encouragement, right now i drip my freshwater right ontop of the wave maker to make sure it mixes well. maybe when i'm feelng braver i'll stop using a drip system and pour it over my wave maker slowly instead.

Link to comment
Share on other sites

  • SRC Member

If you are able to study your tank's evaporation rate, let's say, 1.5 ltrs a day, just set a bottle's worth of freshwater in drip mode, and it should produce a more stable salinity. Your very own DIY ATO! ^_^ You can even mix kalk with it, but that is a lot more difficult to fine tune.

Link to comment
Share on other sites

If you are able to study your tank's evaporation rate, let's say, 1.5 ltrs a day, just set a bottle's worth of freshwater in drip mode, and it should produce a more stable salinity. Your very own DIY ATO! ^_^ You can even mix kalk with it, but that is a lot more difficult to fine tune.

that's a great idea, i'll try it out.

Link to comment
Share on other sites

another suggestion, place a water bottle upside down with the mouth just below the required water level. water will auto flow in when the water level evaporate below the bottle's mouth and stops when water level goes above it..

that sounds cool, i've gotta try that out.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0
    2. 0

      WTS little red Ferrari Acro

    3. 2

      WTS/T Radioactive BN

    4. 0

      WTS Tanks, Equipment

×
×
  • Create New...