Jump to content

Prevent rust on hinges


Recommended Posts

hi bros and sis, ne one has ne idea or suggestions to prevent ur hinges from rusting? m tinkin of doing it to prevent my hinges from rusting...the last time i heard was to use fingernail paint...


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

  • SRC Member

hi bros and sis, ne one has ne idea or suggestions to prevent ur hinges from rusting? m tinkin of doing it to prevent my hinges from rusting...the last time i heard was to use fingernail paint...

use wat paint also no use de bro.

Can temporary prevent cannot permanent prevent.

Out of so many ways,the best way I still find applying grease on it works.

But of coz there bound to have times where it will accidently kana your hand when doing things.

Some1 doesn't 1 2 do anything find an excuse,some1 1 2 do something find a mean!

Link to comment
Share on other sites

use wat paint also no use de bro.

Can temporary prevent cannot permanent prevent.

Out of so many ways,the best way I still find applying grease on it works.

But of coz there bound to have times where it will accidently kana your hand when doing things.

at least can minimize or slow down the process...


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

Try applying Vaseline. Dismantle the whole hinge and give it a good coat including the screws before fixing it back.

thks bro, where can i get it? from ne hardware shop or?


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

Vaseline can be found in Supermarket...

Go to hardware shop and ask for anti-rust oil or something like that... dunno if it works... Saw it at some hardware shop before...

thks for the info bro :)


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

  • SRC Member

at least can minimize or slow down the process...

if u r looking at minimizing the process or slow down,yes!

Paint or what so ever can be apply.

Problem with us now is we dun1 to keep doing maintainence work on those hinges u c.

Even with stainless steel hinges sprayed,they still corrode when meet with seawater. :)

Some1 doesn't 1 2 do anything find an excuse,some1 1 2 do something find a mean!

Link to comment
Share on other sites

Yup, one of the many uses of vaseline.

For more, please see http://www.wackyuses.com/vaseline.html

Beside the uses stated in the link above, vaseline can be used to prevent silicone from sticking to your fingers.

"Reefs, like forests, will only be protected in long term if they are appreciated"
Dr. J.E.N. Veron
Australian Institute of Marine Science


-----------------------------------------------------------------------

Member of:

post-1182-0-60431600-1322062247_thumb.jp

post-2241-0-43391700-1354511230.png

UEN: T08SS0098F
Please visit us here: http://www.facebook....uaristSocietySG
Facebook Group: http://www.facebook....gid=34281892381

Link to comment
Share on other sites

  • SRC Member

hi bros and sis, ne one has ne idea or suggestions to prevent ur hinges from rusting? m tinkin of doing it to prevent my hinges from rusting...the last time i heard was to use fingernail paint...

i uses spary on silicone grease on my hinges and my fishing equipment... so far so good... just spray on the hinges as and when u feel like it....

Selling big game fishing equipment. Stella 20k / 17k .. made in Japan jigging blue rose / kabuzu popping rod... pm for prices

Link to comment
Share on other sites

  • SRC Member

Corrosion is a natural event. You can only delay it, not prevent it. Vaseline or oil regularly.

You can also consider getting high-quality stainless hinges and screws.

post-1182-0-60431600-1322062247_thumb.jppost-2241-0-43391700-1354511230.png

"Be formless... shapeless, like water. If you put water into a cup, it becomes the cup. You put water into a bottle; it becomes the bottle. You put it into a teapot; it becomes the teapot. Water can flow, or it can crash. Be water, my friend..." - Lei Siu Lung (Bruce Lee)

Link to comment
Share on other sites

thks for the info sharing bros, i tink i will try vaseline...hope the advices here gonna benefits other bros / sis too :)


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

  • SRC Member

Corrosion is a natural event. You can only delay it, not prevent it. Vaseline or oil regularly.

You can also consider getting high-quality stainless hinges and screws.

normal stainless steel item sold in the market like fork,spoon I'll say they r made of 316 stainless steel.

So for the hinges as well.

If u looking for high quality type I dun think there's any available in the market.

Anyway even the pure stainless Steel(302) rust when contacted with seawater after sometime.

So conclusion: the only way is to grease it,maintain it n when time to change,change regularly :)

Some1 doesn't 1 2 do anything find an excuse,some1 1 2 do something find a mean!

Link to comment
Share on other sites

  • SRC Member

Just smear WD40 or is it WB40 .. I know it's W <something> 40 ( can't remember right now)... on the hinges.. it's in a spray can so what I did was spray it on a piece of cloth away from the tank and then rubbed it on my hinges and then open up all the cabinet doors to let the tank "air" a while... :P of course I stood by to make sure "quick hand quick feet" to pick up any fish which MAY jump during the time of "airing".. :P

You can get it at the DIY shops. :)

Cheers, ;)

Desi

Sheldon (TBBT): A little misunderstanding? Galileo and the Pope had a little misunderstanding...

Link to comment
Share on other sites

  • SRC Member

Just smear WD40 or is it WB40 .. I know it's W <something> 40 ( can't remember right now)... on the hinges.. it's in a spray can so what I did was spray it on a piece of cloth away from the tank and then rubbed it on my hinges and then open up all the cabinet doors to let the tank "air" a while... :P of course I stood by to make sure "quick hand quick feet" to pick up any fish which MAY jump during the time of "airing".. :P

You can get it at the DIY shops. :)

Maybe you got imitation product so it read wB40. frequent oiling will prevent rust. the problem is such manual touch points tends to become infrequent over time so rust sets in... pinch.gif

post-1182-0-60431600-1322062247_thumb.jppost-2241-0-43391700-1354511230.png

"Be formless... shapeless, like water. If you put water into a cup, it becomes the cup. You put water into a bottle; it becomes the bottle. You put it into a teapot; it becomes the teapot. Water can flow, or it can crash. Be water, my friend..." - Lei Siu Lung (Bruce Lee)

Link to comment
Share on other sites

  • SRC Member

Go for sugatsune SS 304B hinges...you will not regret :groupwavereversed: !

Where to get? Might wanna try it...

Some1 doesn't 1 2 do anything find an excuse,some1 1 2 do something find a mean!

Link to comment
Share on other sites

It a hardware shop or? Any contact? Address? Thanks!

Here is the address;

200 Jalan Sultan, #01-01 Textile Centre, Singapore 199018

Office:

Tel : (65) 6291 7288 (5 lines)

Fax : (65) 6291 1228

Email : mailto:sales@shanghaitonglee.com.sg

Website : www.shanghaitonglee.com.sg

Showroom:

Tel : (65) 6298 7211 (5 lines)

Fax : (65) 6296 5540

Business Hours :

9.00 am to 5.30 pm (Mondays to Fridays)

9.00 am to 4.00 pm (Saturdays

post-1182-049500100201281969137_thumb.gi

Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe

Link to comment
Share on other sites

  • 2 weeks later...
  • SRC Member

Just went shanghai tong lee to buy those hinges...

Info for u guys,it's $9.50 per pc.

Bought 6pcs in total. Can tell the quality quite good wan no looks like those cheapo type! :)

Some1 doesn't 1 2 do anything find an excuse,some1 1 2 do something find a mean!

Link to comment
Share on other sites

  • 2 weeks later...

Just went shanghai tong lee to buy those hinges...

Info for u guys,it's $9.50 per pc.

Bought 6pcs in total. Can tell the quality quite good wan no looks like those cheapo type! :)

Did you buy the Stainless steel screw from them?

post-1182-049500100201281969137_thumb.gi

Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 2
    2. 225

      WTS live rotifers, tigger pods, phyto

    3. 0

      Corals to sell/give

    4. 0

      UQ毕业证【微信:A746103619】办理昆士兰大学毕业证 成绩单 留信认证The University of Queensland diploma

    5. 0

      UNSW毕业证【微信:A746103619】办理新南威尔士大学毕业证 成绩单 留信认证The University of New South Wales diploma

×
×
  • Create New...