Jump to content

New 5.5X2X2.5ft tank


ckyee
 Share

Recommended Posts

Finally decom my 4ft tank and setup my new 5.5X2X2.5ft tank on 17 Sep 10.

Basically, the 0.5ft is the overflow.

In my new tank, I will do without some of the equipments except the basic which is the skimmer.

I will get an aquatronica dosing pump where all the rest of the additives will be provided by my good friends (imported from oversea which is used by those researcher on marine).

Those include bacteria mulitpler (after putting bacteria starter) and allow the water to be cycled.

It will be followed by Bio Mineral and the along the way phosphate remover (solution that pour into the tank where the chemical will start to bind the phosphate and the skimmer will skim all those out after binding.

For Lighting, I have custom made a 5ft LED light with all bulbs imported from oversea.

The box for holding the lighting will be professionally made.

And, my good friend will do up the lighting for me.

To make things easier, all LEDs are replaceable if there is any problem as compared to some of those commercial where replacing the spoil LEDs are very difficult.

post-1898-029811500 1286208128_thumb.jpg

post-1898-035928100 1286208663_thumb.jpg

post-1898-093746000 1286208684_thumb.jpg

post-1898-009714200 1286208706_thumb.jpg

post-1898-035677600 1286208725_thumb.jpg

post-1898-027256200 1286208735_thumb.jpg

post-1898-065510100 1286208762_thumb.jpg

Link to comment
Share on other sites

Finally decom my 4ft tank and setup my new 5.5X2X2.5ft tank on 17 Sep 10.

Basically, the 0.5ft is the overflow.

In my new tank, I will do without some of the equipments except the basic which is the skimmer.

I will get an aquatronica dosing pump where all the rest of the additives will be provided by my good friends (imported from oversea which is used by those researcher on marine).

Those include bacteria mulitpler (after putting bacteria starter) and allow the water to be cycled.

It will be followed by Bio Mineral and the along the way phosphate remover (solution that pour into the tank where the chemical will start to bind the phosphate and the skimmer will skim all those out after binding.

For Lighting, I have custom made a 5ft LED light with all bulbs imported from oversea.

The box for holding the lighting will be professionally made.

And, my good friend will do up the lighting for me.

To make things easier, all LEDs are replaceable if there is any problem as compared to some of those commercial where replacing the spoil LEDs are very difficult.

post-1898-024333400 1286209371_thumb.jpg

post-1898-034254300 1286209400_thumb.jpg

post-1898-015550000 1286209415_thumb.jpg

post-1898-018030200 1286209426_thumb.jpg

post-1898-040268100 1286209437_thumb.jpg

post-1898-054725000 1286209449_thumb.jpg

Link to comment
Share on other sites

Wow! solid set up bro...... tag along.

Mix reef-Main tank 3x2.5x2.5ftA

TI 3ft 8tube

Hitachi compressor unit 1HP

1 x AP- 702 Deltec

1 x Coral Lab CR with Ph controller; 1X AquaMedic Kalk Reactor top off

Baby fish dosing kh/Sr&Kcl/mg

DI water thru kalkwasser

1 x Skimz Fr with BRS gfo

2 x Rio 32hF main pump

1 x Pinpt Orp monitor

1 X Pinpt Ph monitor

Aquamedic wave maker

Sump 3x1.5ft plumbed together with;

1.5ft cube live rock

Frag tank 5x1x1ft

 

Link to comment
Share on other sites

Wow x 3. It has been quite sometime to see big setup. Import yr stuff, maybe u can do bulk order but not an easy task. Cheers.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

based on the design....seems like the lfs at paya lebar....

Nice tank and white cabinet :).

Who is your tank maker?

Cheers!

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

you see aquatronica you should know who's the maker already. haha :)

Good Try MarcoVan, though there is a aquatronica product installed, but the entire setup has nothing to do with aquamarin. For those who want to know on who had assist in the make of this tanks, piping and trunking can PM me separately.post-1898-087199200 1286287409_thumb.jpg

Link to comment
Share on other sites

very nice ckyee i like the way your sump looks andd tank... also cabinet.. actually everything! very nice! got more picture of ur overflow? and is that MM mix with grade 0 sand?

Attached is the overflow picture for your reference.

post-1898-095596400 1286287530_thumb.jpg

post-1898-010075400 1286287541_thumb.jpg

post-1898-002213800 1286287548_thumb.jpg

Link to comment
Share on other sites

Basically, I will do away with CR and FR as of now and I will monitor a few products which brought in from Germany.

Those products are not commercial launched and available in the market. However, it has been tested and proven by those aqua-culture re-searcher.

(1) Bacteria Multiper

This product is a white powder which be easily dissolve in water and it only used once upon setup.

Once you have introduce the bacteria booster into your tank, you will place this product after that.

I was told by my friend not to use the filter for a few day to multiple the good bacteria (in millions). What we can see from the look of the water will turn cloudy in few hours time. I should have taken the picture but missed to do so. The effect of the cloudy proved one thing according to my friend is that the bacteria is multiplying. It will take a few days till a week to get the water back to clear view. The clear view means that the bacteria had been absorbed into the sand or rocks. Do not know how true but this is the definition by my good friend which is used by him first.

(2) Bio Mineral

It is white powder form which will be easily dissolve in water and I can either manual dose it or eventually make use of a aquatronica dosing pump.

What can it help me? The Bio Mineral comprises of many mineral in which one of those is Calcium. My friend who used it 2 months ago in his tank and Calcium rose to above 500 (overdose). Just imagine, how effective this product as compared to a CR which required a few component which make it work.

(3) Phosphate remover

This is a solution (a bit yellowish) and once you introduce it, it will bind all those phosphate and some others. You will see your skimmer very brownish and at times turned black after 1-2 days skimming. Again, I have forgotten to take a picture of it. However, if I were to dose once more, I will get my camera ready at the skimmer shoot.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0
    2. 0

      WTS little red Ferrari Acro

    3. 2

      WTS/T Radioactive BN

    4. 0

      WTS Tanks, Equipment

×
×
  • Create New...