Mh reflector

[stevenkoh08]

Hi all bro I've search in the market all the MH reflector are aluminum type only.

One thing i don't really like aluminum cause it bent easily and heat problem

So I've found a mirror surface stainless steel (Grade 304, BA furnish 0.8mm thick)

I plan to mount on two PC fan to blow against the reflector (corrected the conductor of heat)

and it harder so easily to handle

I've got a quote on a sheet of it 4ft x 8 ft at around S$260. they do not do cutting so have to find a cutter to do it.

So far i can't find any as in the end i plan to cut myself. But each sheet able to make three out of it i only need two so have 1 left

If there's more people interested think we can make it together, best of all if u all can get someone to do the cutting

[stevenkoh08]

here are the template only

[LaW]

hi Steven,

I believe Aluminium is better as a heat conductor than stainless stain and its corrode free compared to steel. So you might want to double check on that.

and thanks for the hospitality then.

cheers.

[stevenkoh08]

it ok bro

for this i also still considering that

[garyjg]

Hi Steven,

I found a place over at pioneer circle that will cut and bend the SS, I made a reflector years ago but... as Law said you'll have to use SS316L (low Iron) also called marine grade but it's very heavy.

[stevenkoh08]

mm ok can give me the address and i'll see how