CFOh Posted June 5, 2010 Share Posted June 5, 2010 yesterday calibrated my pH pen, seem like it is way off calibration. so new verify reading is 8.1. my tank temperature is maintain at 26ºC. i assume no pest or fish cause i only have 3 fish in my tank. should be relatively peaceful for the yuma. Then make sense now... ok... I suggest try step 4. that I proposed and also bring your salinity down to ~1.022 to improve the system margin... I assume yr tank still new right?? try some reef booster solution... will be better... And also probably get those continues PH monitoring system... easier to monitor and reliable too..... Cheers and Happy Reefing..... Quote LFS Map in singapore __________________ ><((((º>`·.¸¸.·´¯`·.¸.·´¯`·...¸><((((º> ·´¯`·.¸. , . .·´¯`·.. >((((º> Cheers and Happy Reefing.... Link to comment Share on other sites More sharing options...
marinakid Posted June 6, 2010 Author Share Posted June 6, 2010 is it better/recommend to have lower salinty? or just a safe measurement so that there is more buffer in the salinty? Quote Link to comment Share on other sites More sharing options...
CFOh Posted June 6, 2010 Share Posted June 6, 2010 is it better/recommend to have lower salinty? or just a safe measurement so that there is more buffer in the salinty? Just in general.... r u using hydrometer or refractometer? try get one refractometer or pinpoint measurement for reference. You will find some positive offset on some brand of Hydrometer .. So, to be safe.. keep it slightly close to nominal value.. Will be less stressful to livestock when evaporation take place.... And slightly gain oxygen solubility margin.... Especially.. when tank cycling also lack of experince to foresee changes..... 1.025 is Max.. slight evaporation or measurement error will resulted out of spec.... unless Auto Top-up system or routine checking.... I know some sps keeper control sg @ 1.025... But I found this value fall in high side for fishes (not all but majority)........just my opinion... Another point is ensure measure main tank salinity as well beside new salt mix water..... This is common mistake ppl make... Too High salinity will resulted oxegen deficiency... Cheers and Happy Reefing.... Quote LFS Map in singapore __________________ ><((((º>`·.¸¸.·´¯`·.¸.·´¯`·...¸><((((º> ·´¯`·.¸. , . .·´¯`·.. >((((º> Cheers and Happy Reefing.... Link to comment Share on other sites More sharing options...
marinakid Posted June 6, 2010 Author Share Posted June 6, 2010 i am using a refractormeter. not using sump so dont really experience water loss and have alway been monitoring the water level. think i try bring down the salinty. can save some money on salt mix also. Quote Link to comment Share on other sites More sharing options...
CFOh Posted June 6, 2010 Share Posted June 6, 2010 i am using a refractormeter. not using sump so dont really experience water loss and have alway been monitoring the water level. think i try bring down the salinty. can save some money on salt mix also. Cheers.. u may consider adding sump in the future... will not regret on this.. Reference on some basic filtration: http://www.sgreefclub.com/allabt.html#abt1 Quote LFS Map in singapore __________________ ><((((º>`·.¸¸.·´¯`·.¸.·´¯`·...¸><((((º> ·´¯`·.¸. , . .·´¯`·.. >((((º> Cheers and Happy Reefing.... Link to comment Share on other sites More sharing options...
SRC Member garyjg Posted June 6, 2010 SRC Member Share Posted June 6, 2010 Bro, I a simple word if you're seeing algae in your tank than your tanks in and unbalanced state... you said your not checking your PO4...? check it! Don't think because your using a product it's working. Quote Link to comment Share on other sites More sharing options...
rocker Posted June 6, 2010 Share Posted June 6, 2010 PO4 will cause the yuma to melt? doubt so Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.