Jump to content

Epoxy/ Glue for Impeller


oceanviper
 Share

Recommended Posts

  • SRC Member

Hi guys....

Anyone who can recommend some type of epoxy or glue which i can use to glue back my impeller?

Now that the magnet has came off, so no more spinning.....

The glue need to able to witstand force and temperature.....

Do let me know where to get as well...

Thanks.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member

You'll need to find something in the lines of weld-on, I have a couple different types but there for Acrylic only.

Here's the link.

http://www.ipscorp.com/

Thanks...

A bit hard for me to know cause I need to bond the magnet to the plastic impeller.....

you have any recommendation?

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member

[V]tEc maybe right, might just be easier to replace the impeller rather than wastering time trying to glue it back together.

The pump is Hydor.....

I find it no point getting the replacement when the impeller is almost 1/2 the price of the new units.....

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

for ceramic shaft it can't be stick back by super glue...

and u need to get a right position thatit's inline with the end to end point ( or else it'll break again once on the pump)

if u really want to stick it back u can drop by my place this weekend when i'm home i'll use a 2ton epoxy mix and fix it

however it need bout 8hrs cure to have such holding power

Link to comment
Share on other sites

  • SRC Member

for ceramic shaft it can't be stick back by super glue...

and u need to get a right position thatit's inline with the end to end point ( or else it'll break again once on the pump)

if u really want to stick it back u can drop by my place this weekend when i'm home i'll use a 2ton epoxy mix and fix it

however it need bout 8hrs cure to have such holding power

Hi Steven.

Thanks for the tips and offer....

In fact i'm actually stick back the plastic fan that spins when the magnet move.

Due to the fan loose, is not spinning while the magnet is already spinning.....if you get what i mean.....

Anyway I'll try to use the 2Ton epoxy.....

Concern would be any chemical effects to the corals and LS...?

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member

for sure it won't i'm using it as well to bond some of the LR, as well as my wave maker to the magnet glass cleaner

so now i've a magnet holder for my resun wavemaker

Hi Steven.

Thanks for sharing the info.....

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

Hi Steven.

Thanks for the tips and offer....

In fact i'm actually stick back the plastic fan that spins when the magnet move.

Due to the fan loose, is not spinning while the magnet is already spinning.....if you get what i mean.....

Anyway I'll try to use the 2Ton epoxy.....

Concern would be any chemical effects to the corals and LS...?

I uses the same epoxy on some of my tank application as well... should be safe..... Cheers..

30ikthj.gif30ikthj.gif30ikthj.gif
BANNER.jpg
1-3.jpg


LFS Map in singapore
__________________
><((((º>`·.¸¸.·´¯`·.¸.·´¯`·...¸><((((º>
·´¯`·.¸. , . .·´¯`·.. >((((º>
Cheers and Happy Reefing....

Link to comment
Share on other sites

  • 1 month later...
  • SRC Member

Araldite will do the job very well, but stick to the rule of Less Is Best, too much and the bond will not be that good.

Hi bro....

Upgraded to bubble magus....

Thks.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      加拿大保录取_SFU毕业证成绩单——Q微信751558146西蒙菲莎大学学位证_成绩单_办理SFU文凭学历认证Simon Fraser University

    2. 0

      美国学位证_Brandeis毕业证成绩单+Q微信751558146布兰迪斯大学学位证_成绩单_办理Brandeis文凭学历认证Brandeis University

    3. 0

      加拿大保录取_UBC毕业证成绩单——Q微信751558146英属哥伦比亚大学学位证_成绩单_办理UBC文凭学历认证University of British Columbia

    4. 0

      美国学位证_PSU毕业证成绩单+Q微信751558146宾州州立大学学位证_成绩单_办理PSU文凭学历认证Penn State University Park

×
×
  • Create New...