Jump to content

UV Light inside the Sump Tank


oceanviper
 Share

Recommended Posts

  • SRC Member

Hi bro....

I do noticed that many use the UV lights with the inlet and outlet for water to flow in & out.....

I'm planning to place my UV light inside my sump tank ( summersible type ).

My guessing is that this UV will also kill my bacteria inside my sump tank leaving in the bacteria home or biohome.

Or should i cover one side with some reflectors to prevent the lights shine to my bacteria home compartment?

Can anyone agree with my assumption above?

Or anyone had use a summersible UV Light inside their sump tank which will also shine into the bacteria compartment?

Thanks.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

Hi bro....

I do noticed that many use the UV lights with the inlet and outlet for water to flow in & out.....

I'm planning to place my UV light inside my sump tank ( summersible type ).

My guessing is that this UV will also kill my bacteria inside my sump tank leaving in the bacteria home or biohome.

Or should i cover one side with some reflectors to prevent the lights shine to my bacteria home compartment?

Can anyone agree with my assumption above?

Or anyone had use a summersible UV Light inside their sump tank which will also shine into the bacteria compartment?

Thanks.

Hai, Mind to share how your UV light looks? Is it enclosed type or just light bulb itself? I know there is UV light alone selling in LFS but also recommended locate them in enclosed compartment.. It is harmful to our eye sight in long term... take note ya....

Cheers and Happy Reefing..

Cheers and Happy Reefing....

30ikthj.gif30ikthj.gif30ikthj.gif
BANNER.jpg
1-3.jpg


LFS Map in singapore
__________________
><((((º>`·.¸¸.·´¯`·.¸.·´¯`·...¸><((((º>
·´¯`·.¸. , . .·´¯`·.. >((((º>
Cheers and Happy Reefing....

Link to comment
Share on other sites

  • SRC Member

Hai, Mind to share how your UV light looks? Is it enclosed type or just light bulb itself? I know there is UV light alone selling in LFS but also recommended locate them in enclosed compartment.. It is harmful to our eye sight in long term... take note ya....

Cheers and Happy Reefing..

Cheers and Happy Reefing....

Hi bro....

My UV are those with the light bulb and not enclose....

Is also summersible type.

Which why i place it inside my sump tank.

The UV light is running on timer switch which only turn ON in the middle of the night(where everyone is asleep).

My main concern are good bacteria, will they eliminated by the UV lights?

Thanks.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

:rolleyes:

Hi bro....

My UV are those with the light bulb and not enclose....

Is also summersible type.

Which why i place it inside my sump tank.

The UV light is running on timer switch which only turn ON in the middle of the night(where everyone is asleep).

My main concern are good bacteria, will they eliminated by the UV lights?

Thanks.

UV kills everything that is exposed to it. Even your eyes...

Better check if UV will affect the silicon.

Always something more important than fish.

http://reefbuilders.com/2012/03/08/sps-pico-reef/

Link to comment
Share on other sites

  • SRC Member

:rolleyes:

UV kills everything that is exposed to it. Even your eyes...

Better check if UV will affect the silicon.

Hi bro...

I doubt that the UV lights will have any impact to the silicon.....

Anyway thanks for your advice.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...