Jump to content

Refillable Cartridge for DI resin and Carbon

teebs

By teebs,
in Product Reviews

 Share

Recommended Posts

  • SRC Member
teebs Newbie

teebs

Posted
  • SRC Member
Posted

This is the refillable cartridge from my bulk order:

Side View

IMG_1640.jpg

Top View

Water will enter the cartridge from the sides where there is a sponge.

IMG_1642.jpg

Bottom View

Water will exit from the triangular holes at the bottom of the cartridge.

IMG_1644.jpg

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites
  • SRC Member
teebs Newbie

teebs

Posted
  • Author
  • SRC Member
Posted

Internal View

IMG_1646.jpg

Base Cap & 2 sponges

IMG_1647.jpg

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites
  • SRC Member
teebs Newbie

teebs

Posted
  • Author
  • SRC Member
Posted

Before you start to fill up the cartridge with the DI resin, insert one of the sponges, preferably the thicker one, fully into the cartridge.

IMG_1649.jpg

Side View of the sponge

IMG_1650.jpg

After that you can use a spoon to scoop the DI resin from the zip lock bag and place them into the cartridge. Put the resin into the cartridge until it is full like this.

IMG_1652.jpg

After that, place the remaining sponge on resin and screw the base cap on the cartridge. What you will finally have will be a DI cartridge that is fully packed with DI resin.

IMG_1656.jpg

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites
  • SRC Member
teebs Newbie

teebs

Posted
  • Author
  • SRC Member
Posted

... lol u lagi "eng" .......

Not as "eng" as you lah... :eyebrow:

By the way, I found that using the rubber gasket from the Crystal Pro, the refillable cartridge has a tighter fit. Whether not using the gasket will result in water escaping from the sides is not know yet as I haven't made any DI water... :upsidedown:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites
jackywongto Newbie

jackywongto

Posted
Posted

Not as "eng" as you lah... :eyebrow:

By the way, I found that using the rubber gasket from the Crystal Pro, the refillable cartridge has a tighter fit. Whether not using the gasket will result in water escaping from the sides is not know yet as I haven't made any DI water... :upsidedown:

yes it does i think. saw waterfall yesterday.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites
  • SRC Member
pokmingsheng Newbie

pokmingsheng

Posted
  • SRC Member
Posted

Not as "eng" as you lah... :eyebrow:

By the way, I found that using the rubber gasket from the Crystal Pro, the refillable cartridge has a tighter fit. Whether not using the gasket will result in water escaping from the sides is not know yet as I haven't made any DI water... :upsidedown:

Peter, you have that extra rubber gasket from Crystal Pro?

i only need 1 more...

My Decomissioned 2ft Cube: (31st March 2011)

Carpe Diem~!!!

My Current 4ft X 2ft X 2ft:

Link to comment
Share on other sites
  • SRC Member
teebs Newbie

teebs

Posted
  • Author
  • SRC Member
Posted

Peter, you have that extra rubber gasket from Crystal Pro?

i only need 1 more...

Hi kiko, I dun have any spare leh. Only got the 2 from my previous 2 catridges, the rest I threw away liao... :upsidedown:

But I think u can use the white tape you can get from the hardware stores and tape the inlet of the Crystal Pro cannister. It should be able to work since what you want to do is to prevent the water from gushing out.

Will try to do this later when I have the time and see if it is workable.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      LF bird nest coral

      Anyone selling bird nest coral? Preferably in the west. Can send me pics thanks
      damien05 in Sell off/Pasar Malam Shop
    2. 0

      WTS Items

      Selling the following Items due to upgrading to new Redsea Reefer 250 Tank. Redsea Max Nano Peninsula Complete System includes Reef safe ReefLED 50 Lighting, Pump provides 950 l/h(240gph), Rear Sump & Automatic Top-Off unit with a 1.5 liter reservoir, Redsea Aquarium Net Cover, Max Nano Filter Bag 100 micron (1 pcs New), Marco Rockscape, 2 X AF Rockscape. Tank dimension: Display tank length : 45 cm, height : 45 cm, width : 58.5 cm. Total system height : 132 cm, Total system water vol. : 100 L, Display tank water vol. : 87L, Ultra-clear Front & Side glass : 8mm, Bottom glass : 10mm - Letting go @ $780. Hailea HK-150A Chiller, 1/10hp - Letting go @ $250. Eheim 12/16mm Hose (3m Length)- Brand New and keep as spare- Letting go @ $12. Vortech MP10QD - Letting go @ $380. Anemone Guard (Compatible for Vortech MP10) - Letting go @ $20. Jebao Wifi Doser MD 4.4 - Letting go @ $60. Dosing Tube (4m Length) - Brand New and keep as spare - Letting go @ $10. Acrylic Dosing Tube Holder - Letting go @ $10. DD Compact ATO Unit - Letting go @ $70. Acrylic Reservoir 5litres - Letting go @ $50. Tunze Magnet Care Nano 0220.010 - Letting go @ $12. Redsea Complete 4-part Supplement Program - Brand New and keep as spare - Letting go @ $95. Redsea Dosing Tube (4 ea) - Brand New and keep as spare - Letting go @ $25. Salifert (KH) Test Kit - Expiry Date: 03/2028 - Letting go @ $16. Salifert (CA) Test Kit - Expiry Date: 03/2028 - Letting go @ $28. API Ammonia NH3/NH4 Test Kit - Expiry Date: 07/2027 - Letting go @ $14. Fauna Marin Min S - Liquid Coral Food (1000ml) - Expiry Date: 04/2026 - 90% Balance - Letting go @ $70. Flipper Platinum Scraper - Letting go @ $18. All items are bought in-between 2023-2024, Interested, please PM me. *All items is ready for self collection and arrange for your own transportation. Location: Jurong.
      DS868 in Sell off/Pasar Malam Shop
    3. 0

      WTS CO2 scrubber media

      Air skimz pro reef media. Balance around 2.1kg. $30 Collection 523608 Sent from my FCP-N49 using Tapatalk
      Jimbo in Sell off/Pasar Malam Shop
    4. 1

      WTS used Coral Rack (Magnet)

      $5 Sent from my iPhone using Tapatalk
      Gilwy Kok in Sell off/Pasar Malam Shop
    5. 1

      WTG Surface Skimmer

      Hi still available
      Calvin74ming in Sell off/Pasar Malam Shop
×
×
  • Create New...