Jump to content

Refillable Cartridge for DI resin and Carbon

teebs

By teebs,
in Product Reviews

 Share

Recommended Posts

  • SRC Member
teebs Newbie

teebs

Posted
  • SRC Member
Posted

This is the refillable cartridge from my bulk order:

Side View

IMG_1640.jpg

Top View

Water will enter the cartridge from the sides where there is a sponge.

IMG_1642.jpg

Bottom View

Water will exit from the triangular holes at the bottom of the cartridge.

IMG_1644.jpg

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites
  • SRC Member
teebs Newbie

teebs

Posted
  • Author
  • SRC Member
Posted

Internal View

IMG_1646.jpg

Base Cap & 2 sponges

IMG_1647.jpg

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites
  • SRC Member
teebs Newbie

teebs

Posted
  • Author
  • SRC Member
Posted

Before you start to fill up the cartridge with the DI resin, insert one of the sponges, preferably the thicker one, fully into the cartridge.

IMG_1649.jpg

Side View of the sponge

IMG_1650.jpg

After that you can use a spoon to scoop the DI resin from the zip lock bag and place them into the cartridge. Put the resin into the cartridge until it is full like this.

IMG_1652.jpg

After that, place the remaining sponge on resin and screw the base cap on the cartridge. What you will finally have will be a DI cartridge that is fully packed with DI resin.

IMG_1656.jpg

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites
  • SRC Member
teebs Newbie

teebs

Posted
  • Author
  • SRC Member
Posted

... lol u lagi "eng" .......

Not as "eng" as you lah... :eyebrow:

By the way, I found that using the rubber gasket from the Crystal Pro, the refillable cartridge has a tighter fit. Whether not using the gasket will result in water escaping from the sides is not know yet as I haven't made any DI water... :upsidedown:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites
jackywongto Newbie

jackywongto

Posted
Posted

Not as "eng" as you lah... :eyebrow:

By the way, I found that using the rubber gasket from the Crystal Pro, the refillable cartridge has a tighter fit. Whether not using the gasket will result in water escaping from the sides is not know yet as I haven't made any DI water... :upsidedown:

yes it does i think. saw waterfall yesterday.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites
  • SRC Member
pokmingsheng Newbie

pokmingsheng

Posted
  • SRC Member
Posted

Not as "eng" as you lah... :eyebrow:

By the way, I found that using the rubber gasket from the Crystal Pro, the refillable cartridge has a tighter fit. Whether not using the gasket will result in water escaping from the sides is not know yet as I haven't made any DI water... :upsidedown:

Peter, you have that extra rubber gasket from Crystal Pro?

i only need 1 more...

My Decomissioned 2ft Cube: (31st March 2011)

Carpe Diem~!!!

My Current 4ft X 2ft X 2ft:

Link to comment
Share on other sites
  • SRC Member
teebs Newbie

teebs

Posted
  • Author
  • SRC Member
Posted

Peter, you have that extra rubber gasket from Crystal Pro?

i only need 1 more...

Hi kiko, I dun have any spare leh. Only got the 2 from my previous 2 catridges, the rest I threw away liao... :upsidedown:

But I think u can use the white tape you can get from the hardware stores and tape the inlet of the Crystal Pro cannister. It should be able to work since what you want to do is to prevent the water from gushing out.

Will try to do this later when I have the time and see if it is workable.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 3

      Every thing must go

      Pm
      Rocque in Sell off/Pasar Malam Shop
    2. 2

      WTS Black Snowflake Clownfish

      Ups for the week! Price reduced to $55
      jellyfish8 in Sell off/Pasar Malam Shop
    3. 4

      Sell fish tank and equipment

      ^
      Kx8888 in Sell off/Pasar Malam Shop
    4. 0

      WTS Beautiful Pair of Common Cleanfish Pair

      With a heavy heart, I am selling my pair of beautiful common Clownfish. One is around 3 cm, the other 5 cm. They are being territorial suddenly (I changed tank) and the smaller fish including my baby parrotfish are being pushed or harassed. I can't have another tank and I don't have the heart to isolate them. They are not shy, they come close to the front of the tank when I'm around. Feed mix of flakes and frozen shrimp. I've learned to live and adore them so, if keen please ensure they go to good homes and won't be abandoned or given away. I have to choose to keep them or the smaller fish that have been with me longer than this couple have, so... The pair for $70. Self collect near Beo crescent. PM me. Cheers! VID20241118182750.mp4
      homme143 in Sell off/Pasar Malam Shop
    5. 0

      加拿大学位文凭,UNBC毕业证成绩单+Q微信75155（8146）北英属哥伦比亚大学学位证成绩单*办理UNBC真实学历认证University of Northern British Columbia

      加拿大学位文凭,UNBC毕业证成绩单+Q微信75155（8146）北英属哥伦比亚大学学位证成绩单*办理UNBC真实学历认证University of Northern British Columbia 加拿大学位文凭,UNBC毕业证成绩单+Q微信75155（8146）北英属哥伦比亚大学学位证成绩单*办理UNBC真实学历认证University of Northern British Columbia 加拿大学位文凭,UNBC毕业证成绩单+Q微信75155（8146）北英属哥伦比亚大学学位证成绩单*办理UNBC真实学历认证University of Northern British Columbia 【实体公司】QQ/微信751558146办理毕业证，成绩单，教育部学历学位认证，使馆认证，归国人员证明，修改成绩单+信封申请学校，offer录取通知书，在读证明，普利茅斯大学学位证书，Plymouth毕业文凭。 ★★主营项目： ◆办理真实使馆公证(即留学回国人员证明,免费申请货后付款,不成功不收费!!!) ◆办理教育部国外学历学位认证。(网上可查、永久存档、快速稳妥,回国发展,考公务员,落户,进国企,外企,创业,无忧愁) ◆办理各国各大学文凭(世界名校一对一专业服务,可全程监控跟踪进度) ◆提供整套申请学校材料 ◆可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的普利茅斯大学毕业证、百分之百让您绝对满意、设计,印刷,DHL快递;毕业证、成绩单7个工作日,真实大使馆教育部认证2个月。 【真实可查】---【永久存档】---【安全可靠】---【值得信赖】 八年从业经验,专业指导,私人定制,倾心为您解决留学毕业回国各种疑难问题 <1>教育部学历学位认证服务: 做到真实永久存档，网上轻易可查，绝对对客户的资料进行保密，登录核实后再付款。 <2>为什么您的学位需要在国内进一步认证？ 二：留信认证的作用 1：该专业认证可证明留学生真实留学身份。 2：同时对留学生所学专业等级给予评定。 3：国家专业人才认证中心颁发入库证书 4：这个入网证书并且可以归档到地方 5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在公安部网内查询个人身份证信息后，同步读取人 才网入库信息。 6：个人职称评审加20分。 7：个人信誉贷款加10分。 8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才。
      vfdw067 in Members Tank & Specs
×
×
  • Create New...