Jump to content

Water temperture


Recommended Posts

Hi bro/sis, my Submersible Digital Thermometer when submerge in water, it read 30degree.. but when i bring it just above the water level, it drop to 28degree.. is it normal? all along i thought water temperature will be lower then the room temperature..

Link to comment
Share on other sites

  • SRC Member

not exactly when your equipment used are not energy efficient.

if your equipment are of low wattage then it will not contribute much to them temperature.

but however, if your equipment uses high elec, then it will be higher then ur air temperature. the type of light u used will contribute significantly to your temperautre.

think it this way, all your equipment used on wattage are conbimed into a heater for your aquarium. then of course ur water temperature will be of higher than ur air.

china made products are known to be not energy efficient. especially on their high wattage circulation pump.

and welcome to have your first post here. do ask more questions in this forum to help urself with ur aquarium.

If a man could beat his own fantasy. Then to only breed in captivity. Then its pointless.

Genesis 1:20

And God said, Let the waters bring forth abundantly the moving creature that has life, and fowl that may fly above the earth in the open firmament of heaven. And God created great whales, and every living creature that moves, which the waters brought forth abundantly, after their kind, and every winged fowl after his kind: and God saw that it was good. And God blessed them, saying, Be fruitful, and multiply, and fill the waters in the seas, and let fowl multiply in the earth. And the evening and the morning were the fifth day.

|| Tank: 78" x 30" x 30" || Sump: 48" x 22" x 20" || Lights: PowerModule 10 X 80W|| Returns: 2 x HF32 ||

|| Skimmer: BubbleKing Supermarin 300 || Wavemaker: 3 x 6100 & 1 x 6200, 2 x Wavebox 6212, WavySea ||

|| FR: 2 x FR150 || NR: Sulphur Denitrator || CR: RM Custom Made 8" || KR: Deltec KM500 || TopUp: Tunze Osmolator 3155 ||

|| UV: Coralife 12X 36W || Ozonizer: Sanders C200|| Controller: GHL Profilux Plus II Ex ||

Link to comment
Share on other sites

thx for ur fast reply.. but when i did tis is during light off, and the 2 pump i using is eheim compact 300, 300 l/h, 5W, 230V, 50Hz for my skimmer and return pump is using eheim universal 1048 pump, 600l/h, 10W.

been only using tis 2 equipment. it is a 2 x 1 x 1.5 feet tank wif ios.. any other possible reason? wanna keep coral but tank temperature may go up to 31 during sunny days.. :(

Link to comment
Share on other sites

  • SRC Member

thx for ur fast reply.. but when i did tis is during light off, and the 2 pump i using is eheim compact 300, 300 l/h, 5W, 230V, 50Hz for my skimmer and return pump is using eheim universal 1048 pump, 600l/h, 10W.

been only using tis 2 equipment. it is a 2 x 1 x 1.5 feet tank wif ios.. any other possible reason? wanna keep coral but tank temperature may go up to 31 during sunny days.. :(

measure ur water temperature just before lights on. thats reading will futher give us more information.

alternatively, you can use a fan to blow at the water.

If a man could beat his own fantasy. Then to only breed in captivity. Then its pointless.

Genesis 1:20

And God said, Let the waters bring forth abundantly the moving creature that has life, and fowl that may fly above the earth in the open firmament of heaven. And God created great whales, and every living creature that moves, which the waters brought forth abundantly, after their kind, and every winged fowl after his kind: and God saw that it was good. And God blessed them, saying, Be fruitful, and multiply, and fill the waters in the seas, and let fowl multiply in the earth. And the evening and the morning were the fifth day.

|| Tank: 78" x 30" x 30" || Sump: 48" x 22" x 20" || Lights: PowerModule 10 X 80W|| Returns: 2 x HF32 ||

|| Skimmer: BubbleKing Supermarin 300 || Wavemaker: 3 x 6100 & 1 x 6200, 2 x Wavebox 6212, WavySea ||

|| FR: 2 x FR150 || NR: Sulphur Denitrator || CR: RM Custom Made 8" || KR: Deltec KM500 || TopUp: Tunze Osmolator 3155 ||

|| UV: Coralife 12X 36W || Ozonizer: Sanders C200|| Controller: GHL Profilux Plus II Ex ||

Link to comment
Share on other sites

Hi bro/sis, my Submersible Digital Thermometer when submerge in water, it read 30degree.. but when i bring it just above the water level, it drop to 28degree.. is it normal? all along i thought water temperature will be lower then the room temperature..

You will be surprise how much heat the water pumps / wavemaker generates.

As a rule of thumb, any one of the above mentioned generally increases temp by 1 deg cel.

So it is not surprising that the temp is cooler at the surface then in the water.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...