Jump to content

Question on Sump


Recommended Posts

errrr, no i dont mean they put it inside the sump tank, they just simply place the bag of bio ring inisde the MAIN tank, beside looking ugly, does it help in filtering this way? Tq

dat is the laziest and ignorant way of trying to cultivate bacteria to polish ur water.If you really want to setup a marine tank,there r many gurus here.Seek thier help.2cents worth.

Link to comment
Share on other sites

Relax, hehe. No definite setup for sump but those you saw at lfs, did u see the full setup and also how long it took to mature and stablise . . Also, the stocks are meant for turnover and setup may not be suit serious reefers. Have open concept is good for flexibility but u have to consider bubbles, big particles that might harm yr skimmer, etc. Maybe u just do 2 to 3 partition to separate filter, skimmer and return part.

dat is the laziest and ignorant way of trying to cultivate bacteria to polish ur water.If you really want to setup a marine tank,there r many gurus here.Seek thier help.2cents worth.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

I am not saying i am going to use this way to cultivate bacteria, but i just want to know whether this way work or not, i believe many bro here also like to know if it work or not. I have seen a few LFS at Pasir Ris Farm doing it, they are the old bird, i hope they are not ignorant by doing so.

Link to comment
Share on other sites

Bro, bros here who bothered to advice you are considered good, some might be frank and mean no harm.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Definitely but u must do yr home work to ensure the sump can take the water volume when everything stopped. Hope this help.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

  • SRC Member

Add on to bro solo77's comment, u need to ensre your down pipe to sump tank is bigger enough to manage the up flow

2ft cube with 2.5 sump

400w MH with 6 x 24w blue T5

Hydor wavemaker controller

Aquatronica controller

Daikin compressor with double coil

RM CR

H&S out sump skimmer

Link to comment
Share on other sites

  • SRC Member

TS,

I do not think there is any right or wrong way, just what you want to achieve.

I have friend that run a DSB main tank, hang on skimmer, a empty sump no partition, with nothing but a filter sock for 4 yrs without changing water (fish only set up). For more sump information or design, you might want to refer to this web.

http://www.melevsreef.com/allmysumps.html

Hope this helps.

Regards,

Billy Cheong

70gal, 250w MH (Reeflux 12000K), Tunze Nano Wavebox 6206, Tunze 6045, Tunze 6025, Teco TW4, Rio HF20, Aquabee 3000L, Rio HF17, SM100 Scrubber box (4x24w T5 2700K)

Fish: Amphiprion ocellaris (Ocellaris Clowns), Nemateleotris magnifica (Firefish), Pterapogon kauderni (Kaudern's Cardinal)

Inverts: Calcinus laevimanus (Hermit Crab), Lysmata amboinensis (Cleaner Shrimp), Sand Dollar

Corals: Capnella (Purple Hairy Finger Leather), Plerogyra sinuosa (Green Bubble Coral), Euphyllia glabrescens (Torch Coral), Dendrophyllia (Supersun Coral), Rhodactis spp. (Hairy Mushroom)

Link to comment
Share on other sites

haha, i use Canister last time cos i travel to china very often, and so i only use China brand, i would say cheap and good, just bought a Atman 106 return pump (4000L/h at S$26) and a Sunsun Jvp-102 wavemaker at S$6,cheap cheap.

Th sumpi go Art Friend and buy some Acrylic plastic and silicon it myself, suoer Ugly but i dont care lah.

Link to comment
Share on other sites

bro, do leak and load test.....acrylic, there should be specialised bond for it, check with exp. reefer here. Good luck and maybe post to show ppl your process. : )

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

  • SRC Member
TS,

I do not think there is any right or wrong way, just what you want to achieve.

I have friend that run a DSB main tank, hang on skimmer, a empty sump no partition, with nothing but a filter sock for 4 yrs without changing water (fish only set up). For more sump information or design, you might want to refer to this web.

http://www.melevsreef.com/allmysumps.html

Hope this helps.

Sump with less partition as possible is good.. but for no partition.. might need more work in other ways..

Firstly, one will need a separate refugium. Unless like you mentioned already DBS so might not see the need for that. If not, a first compartment makes sense.

Then one would need something in place to prevent protein skimmer micro-bubbles from entering the main tank.. this can be easily reduced with a decent designed last compartment.

Center no need for any.. good to have space for all other equipments..

Why do we use "My 2 cents worth" when 1 cents are not legal tender in Singapore anymore? Shouldn't it be 5 cents worth?

"Its easier to blame the 'mantis' or crabs in the tank for missing & dead livestocks.."

http://arcanehacker.blogspot.com/

Link to comment
Share on other sites

Yes i have tested for leaked, first try 2 part leaked and i touch up and all is well.

Yesterday finally fix the overflow pipe to my 4ft tank, working ok, but should i take the end cap(the part where you pour water in than cap it) away or leave it? Tq

Will do the overflow for my 2ft using the same sump today, will take some pic if possible and post it after all is done.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      How do I Recover Scammed Cryptocurrency

    2. 0

      RECOVER LOST OR STOLEN BITCOIN, ETH, USDT WITH THE SUPPORT OF CYBER CONSTABLE INTELLIGENCE

    3. 0

      WTS: Maxspect Jump MJ-165

    4. 0

      Foc 2 tiger cowrie snail

×
×
  • Create New...