Achilles Tang Posted January 19, 2003 Share Posted January 19, 2003 Agree with Tanzy... perhaps your skimmer isn't producing enough foam or maybe the bubbles are too big. You should look into producing very very fine bubbles for organics to bind onto the bubbles. You are using an airstone type skimmer? They are usable for the short term but require a lot of maintenance as you will have to change out the airstone everytime... get the wooden ones, they work better. They still do not give a consistent skimming result coz they get clogged over in a matter of days/weeks, and your water quality takes a nose-dive too. I used to use one a long long time ago! Have long since abandoned them. You will appreciate the increased water quality from good skimmers ie. pump driven ones. It's an investment you will not regret ie. good skimmers coz your livestock will appreciate all the dissolved organics being removed as fast as possible. Quote Link to comment Share on other sites More sharing options...
SRC Member mv3i Posted January 19, 2003 SRC Member Share Posted January 19, 2003 yah , i agree with AT and the rest of the guys on getting the best skimmer that you can afford for your tank ... also you can never really over-skimmed a tank .... it could be x but i personally think it's worth it ... as you have already spent quite a hefty sum on your own stuff so y not a good skimmer too .... Quote Link to comment Share on other sites More sharing options...
SRC Member eprouve Posted January 19, 2003 SRC Member Share Posted January 19, 2003 What's the difference between a Venturi Skimmer and the normal ORCA or Sander's Air Driven? You mean Venturi Skimmers are NOT air driven?? Then how? How much does it cost then, since it is supposedly better than Air Driven Skimmers? Quote Link to comment Share on other sites More sharing options...
SRC Member pospeh Posted January 19, 2003 SRC Member Share Posted January 19, 2003 Venturi skimmers are water pump driven. The venturi valve is a T-shaped valve that draws in water from the water pump in one T-arm, and air from the other T-arm and combines both and shoots it in the skimmer column. The Red-Sea Berlin is the classic venturi skimmer design. Most of the other mid-range skimmers are venturi skimmers. Quote Link to comment Share on other sites More sharing options...
SRC Member anakjoh Posted January 19, 2003 SRC Member Share Posted January 19, 2003 Any recommendation for a venturi skimmer type if I don't use a sump? I currently use an internal counter-current (i.e. airstone type). Gunk gets collected but it's more like dirty water than the thick brown stuff u guys get. Would like to change - so I suppose the only option is a hang-on venturi? Is Prizm any good? Gracias. Quote Link to comment Share on other sites More sharing options...
SRC Member souphamster Posted January 19, 2003 SRC Member Share Posted January 19, 2003 how much is it to cost a normal protein skimmer? Those normal air pump sort? for a little 2feet tank only, so no need too expensive any recommendation the place to buy and pricing u guys bought n using? Quote Link to comment Share on other sites More sharing options...
SRC Member eprouve Posted January 20, 2003 SRC Member Share Posted January 20, 2003 Hi Souphampster. I was using a Sander's Air Driven Skimmer... Very good for 2 feet. Short enough I've just changed to a bigger one cos I added a sump and now there's more water... BTW, I PM you.... Quote Link to comment Share on other sites More sharing options...
lonteoh Posted January 20, 2003 Share Posted January 20, 2003 hey guys, Thanks for all your advices. I have change to a wooden airstone and the skimming really improves alot. At least i can see foam climbing into the foam cup now. I did thought of buying a better PS but i dun have $$ . No choice, still schooling.... Will wait until after CNY then see is i have extra cash to pamper my fishes.... Quote Link to comment Share on other sites More sharing options...
Valleyman Posted January 28, 2003 Share Posted January 28, 2003 Have just installed an ORCA PS which a friend gave to me today. The only place I can install is in the 2nd sump compartment which is about 5" wide and has 8" head of water. I was forced to shorten the PS column by 1" so that the water inlets are submerged. The net result is that the PS cup is almost filled with water (the thin layer of bubble is only about 10mm from the cup cover) and that a copious amt of bubble 'escaped' from the cup and form a bubble mass on the cup cover. Also there are bubbles 'escaping' from the PS column inlets. I am using a sandstone connected to a 2-head air pump. Think I am not doing the right thing. Someone pls point out the faults. Quote Link to comment Share on other sites More sharing options...
SRC Member souphamster Posted January 29, 2003 SRC Member Share Posted January 29, 2003 btw, removing all the bad suibstances, will it affect the PH? NA? water condition level? i must also have a good fliration system rite? Quote Link to comment Share on other sites More sharing options...
SRC Member eprouve Posted January 29, 2003 SRC Member Share Posted January 29, 2003 Have just installed an ORCA PS which a friend gave to me today. The only place I can install is in the 2nd sump compartment which is about 5" wide and has 8" head of water. I was forced to shorten the PS column by 1" so that the water inlets are submerged. The net result is that the PS cup is almost filled with water (the thin layer of bubble is only about 10mm from the cup cover) and that a copious amt of bubble 'escaped' from the cup and form a bubble mass on the cup cover. Also there are bubbles 'escaping' from the PS column inlets. I am using a sandstone connected to a 2-head air pump. Think I am not doing the right thing. Someone pls point out the faults. Hi... the collection cup is not supposed to be submerged at all. The bottom of the cup is supposed to "sit" on the water surface. I.e.: The inverted cone shape part inside the cup should not be blocked by water, so that the bubbles can slowly move up and the "protein" and gunk pushed up to overflow into the cup. I'm not sure if this is the right thing to do, but everything seems to work fine. I throw away a greenish-yellowish-brownish liquid that contains some solids and foam that collect in the cup everyday. Quote Link to comment Share on other sites More sharing options...
optimus prime Posted January 29, 2003 Share Posted January 29, 2003 i've seen many members saying powerfull air pump to go with the skimmers. but can anyone list the brand/models/price of those so called powerfull air pump? thanks alot Quote Link to comment Share on other sites More sharing options...
Valleyman Posted January 29, 2003 Share Posted January 29, 2003 Hi... the collection cup is not supposed to be submerged at all. The bottom of the cup is supposed to "sit" on the water surface. I.e.: The inverted cone shape part inside the cup should not be blocked by water, so that the bubbles can slowly move up and the "protein" and gunk pushed up to overflow into the cup. I'm not sure if this is the right thing to do, but everything seems to work fine. I throw away a greenish-yellowish-brownish liquid that contains some solids and foam that collect in the cup everyday. My collection cup is sitting above water level. However, the water in the cup has cover the inverted cone (inside cup). Understand that bubble foam should comes out of the cone and into the cup. Why is my cup almost flooded with water ? Quote Link to comment Share on other sites More sharing options...
SRC Member Dinosaur Posted January 29, 2003 SRC Member Share Posted January 29, 2003 My collection cup is sitting above water level. However, the water in the cup has cover the inverted cone (inside cup). Understand that bubble foam should comes out of the cone and into the cup. Why is my cup almost flooded with water ? check the control outlet valve. the pressure is too high thats why all the water rush into the cup Quote Link to comment Share on other sites More sharing options...
Valleyman Posted January 29, 2003 Share Posted January 29, 2003 Did't know that there is a control valve in the ORCA PS Quote Link to comment Share on other sites More sharing options...
SRC Member Dinosaur Posted January 29, 2003 SRC Member Share Posted January 29, 2003 Did't know that there is a control valve in the ORCA PS OOpss....... wrong advice again, perhaps its the different model. Mine has a control valve controlling the out going flow from the skimmer which in turns control the water level. Sorri ...... Quote Link to comment Share on other sites More sharing options...
Valleyman Posted January 29, 2003 Share Posted January 29, 2003 Thanks anyway Dino. Maybe, I can install a smallish control valve if this can solve the problem. Anyway, I have decided to go for a PRISM PS after reading up on it. Know any LFS having it in their display tank ? Nothing beats seeing one in operation to gauge its effectiveness and to gauge if I can incorporate it into existing system. Quote Link to comment Share on other sites More sharing options...
SRC Member Chris Posted January 29, 2003 SRC Member Share Posted January 29, 2003 The 3 ft display tank at Marine Life (Hong Leong) is using a Prizm and mine too. Really much better than Orca or even Sander. I upgraded from Sander to Prizm and since then no regret. Quote I think (marine) therefore I am Link to comment Share on other sites More sharing options...
Valleyman Posted January 29, 2003 Share Posted January 29, 2003 Can post a shot for a better understanding ? Quote Link to comment Share on other sites More sharing options...
SRC Member dodo Posted January 29, 2003 SRC Member Share Posted January 29, 2003 Know any LFS having it in their display tank ? Aquamart Quote Link to comment Share on other sites More sharing options...
SRC Member Sinn Posted January 29, 2003 SRC Member Share Posted January 29, 2003 i think they've switched off the skimmer.... Quote Link to comment Share on other sites More sharing options...
SRC Member eprouve Posted January 30, 2003 SRC Member Share Posted January 30, 2003 Valleyman, Is this the "escaped bubbles" you're referring to? I don't know if its supposed to happen, but yeah, I get it too. Quote Link to comment Share on other sites More sharing options...
Achilles Tang Posted January 30, 2003 Share Posted January 30, 2003 hmmm.... no good... no good at all... you should have no such bubbles escaping from your PS. Check all your fittings... sometimes a bad seal from the unions (uhh... does this PS even have one?) could leak air bubbles. Experiment with your in-sump PS.. adjust the height it sits in the water and the water intake until no water is going into the PS due to excessive water pressure. You want to ensure that you only have dry foam moving up the riser tube and into the collection cup. It is not good to have too liquid skimmate... you want it thick and black/dark.... not full of yellowish tea-coloured water. Good luck! Quote Link to comment Share on other sites More sharing options...
SRC Member Sinn Posted January 30, 2003 SRC Member Share Posted January 30, 2003 At, wiff regards to thick black skimmate... im using a normal venturi skimmer... its very difficult to get that dark skimmate.... furthermore, most of the bubbles would collapse at the foam riser... the best i think i got was a rather wet foam,but with spots of blacks and browns.... is it suppose to be like that ? or shd i let the thing run even longer ( the longest it was on was 2 weeks i think) Quote Link to comment Share on other sites More sharing options...
Valleyman Posted January 31, 2003 Share Posted January 31, 2003 Valleyman, Is this the "escaped bubbles" you're referring to? I don't know if its supposed to happen, but yeah, I get it too. Yes, it is precisely what I meant. After seeing that it is not too efficient and reading so much about the ++of the PRIZM, I have discarded the ORCA after 1 day and replaced it with a PRIZM. So far so good. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.