Jump to content

maxspect 3x G1 180w or 2x G2 230w


stevenkoh08
 Share

Recommended Posts

  • SRC Member

I think main question is what corals you intend to place in your tank. 3 x 180w will definately be much brighter than 2 x 230W. I would suspect that the spread of light will be more even with 3x180w than 2x230w.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

I think main question is what corals you intend to place in your tank. 3 x 180w will definately be much brighter than 2 x 230W. I would suspect that the spread of light will be more even with 3x180w than 2x230w.

i intend to keep SPS mainly

Link to comment
Share on other sites

  • SRC Member

something to take note. heat problem generated by the nos of 30w . for example, I read from other forum that the shipment for G2 180 was delayed due to heat

2ft cube with 2.5 sump

400w MH with 6 x 24w blue T5

Hydor wavemaker controller

Aquatronica controller

Daikin compressor with double coil

RM CR

H&S out sump skimmer

Link to comment
Share on other sites

  • SRC Member
i intend to keep SPS mainly

In this case probably 3x180W.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
something to take note. heat problem generated by the nos of 30w . for example, I read from other forum that the shipment for G2 180 was delayed due to heat

he's talking about using 3 x G1 180W or 2 x G2 230W.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member

Maybe u could check with De lighting whether any G1 180 has been brought in to SG b4. If yes, feedback would be nice

2ft cube with 2.5 sump

400w MH with 6 x 24w blue T5

Hydor wavemaker controller

Aquatronica controller

Daikin compressor with double coil

RM CR

H&S out sump skimmer

Link to comment
Share on other sites

  • SRC Member
mm what u mention is indeed having a better spectrum but does it come with a clamp together

U need to check with Razali (Dr Evil) on this. I believe that the G1 models can either be hung on the ceiling or use a pair of legs to rest on the tank.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member

Razali is currently having a 20% discount on the G1 models. The 180W is still available according to his website.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
ya just saw it means a good buy now if i'm going for it

Definately a good buy. :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

3ft, the G2-180 sld be sufficient imo.

For 4 footer, 2 sets of either G2-110 or G2-160 will be sufficent i hope.

In any case its recommended to supplement with T5.

Reef
Tank: 48"x 24"x 24"
Lightings: Maxspect Razor 120w x 2

Skimmer: Skimz Kone SK1
Chiller: Hailea 1/4 hp w/ Aquabee 3000
Wave Maker: Tunze 6065 x 2
Return Pump: Eheim 1262
Uv: Coralife 9 watt Uv w/ Eheim compact 1000


Fowlr
Tank: 36"x 21"x 16"
Lightings: Beamswork Ultrabright Led x 2
Skimmer: Skimz SM161
Wave Maker: Maxijet 1200
Return Pump: Eheim Compact 2000

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      How do I Recover Scammed Cryptocurrency

    2. 0

      RECOVER LOST OR STOLEN BITCOIN, ETH, USDT WITH THE SUPPORT OF CYBER CONSTABLE INTELLIGENCE

    3. 0

      WTS: Maxspect Jump MJ-165

    4. 0

      Foc 2 tiger cowrie snail

×
×
  • Create New...