Any reefeers know how to use this digital timer?

[Eniram]

Hi guys having trouble with this digital timer, manual is in German and when the mode is in Auto channel 1,2 and 3 are not on. Anyone out there have the same timer pls advice.

thx

[peacemaker]

It should go like this:

To set time, press the "clock" button (hold it), followed by setting the "week", "hour" & "minute". Release it to confirm timing.

To program, press the "program" button (I think once should be enough), followed by setting the timings you want. Pressing the "week" button allows you to choose days (mon to sun), "hour" & "minute" buttons to set time. The program sequence should be ON followed by OFF. Also, take note of the channel selection "CH 1-3" button to select the position you want to program. After you're done, leaving it on its own should store the programming. Otherwise, press the "clock" button.

Auto mode should be selected for activation of your program timings. You should be able to test it out at a short timing interval to see if it works.

Disclaimer: I have this set of digital timer, just can't remember the exact details as I haven't been touching it for quite some time. The above should work for you though.

[raydiative]

Hi guys having trouble with this digital timer, manual is in German and when the mode is in Auto channel 1,2 and 3 are not on. Anyone out there have the same timer pls advice.

thx

wilson got this.. why dun you ask him?

[Eniram]

woo cool thanks man! you're the MAN. Having a hard time programing it

[jyoon]

Hi Eniram Bro

Is the 3 pin converter comes with the timer? This is to convert the German plug to our normal 3 pin format. I had the same timer formerly, the quality is not good. I plug in and out a couple of time and the internal "live" and "neutral" has a short cct. Luckily I use a multi-meter measure before turn in ON else it will cause your house cct breaker to trip. Worse will be cause your lights to blow.

I have 3 such converters that is good qaulity brought from Traveller shop. If you need them, its FOC for you as I had changed to use Hager time liao.