Jump to content

Terry's 3x3x2 Tank

Terryz_

By Terryz_,
in Members Tank & Specs

 Share

Recommended Posts

  • Replies 1.4k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

jackywongto
jackywongto

the eyelid look so cute.....

Digiman
Digiman

CF colini is normally from philippines. I personally will prefer coral beauty over nox and flavicauda. Especially those bali deepwater coral beauty with unusual colouration.. The venustus pi

lcf425
lcf425

Some reefers are just so funny hahaha

Posted Images

  • Senior Reefer
yikai Newbie

yikai

Posted
  • Senior Reefer
Posted

They are working.. But they gotten so fat that they need to rest... LOL...

mine eat until almost no more liao. im so happy. even the bloody bryopsis also eat.

but i will wait awhile until my tank gets over the bloody new tank syndrome.

Link to comment
Share on other sites
Terryz_ Newbie

Terryz_

Posted
  • Author
Posted

mine eat until almost no more liao. im so happy. even the bloody bryopsis also eat.

but i will wait awhile until my tank gets over the bloody new tank syndrome.

I got no more diatom.. Only hair algae... Once the finish the hair algae should be fine liao..

Member of:

post-1182-0-60431600-1322062247_thumb.jp

Link to comment
Share on other sites
Terryz_ Newbie

Terryz_

Posted
  • Author
Posted

I am thinking of doing a continuous drip system as I am considering keeping Anthias...

Will be using Zooplanktōs-L ((200.0 - 2,000.0µm), Micrōvore and PhytōChrōm (1 - 30µm)..

Dunno if it is practical?

Member of:

post-1182-0-60431600-1322062247_thumb.jp

Link to comment
Share on other sites
  • SRC Member
BFG Newbie

BFG

Posted
  • SRC Member
Posted

I am thinking of doing a continuous drip system as I am considering keeping Anthias...

Will be using Zooplanktōs-L ((200.0 - 2,000.0µm), Micrōvore and PhytōChrōm (1 - 30µm)..

Dunno if it is practical?

Your tank volume quite large, whatever you drip continuously might not reach the intended target hence needing to drip more, which cost more to do.

Link to comment
Share on other sites
Terryz_ Newbie

Terryz_

Posted
  • Author
Posted

Your tank volume quite large, whatever you drip continuously might not reach the intended target hence needing to drip more, which cost more to do.

I guess so... Will try it out if it can work out... I am using balling method for my Ca, Kh and Mag also..

Member of:

post-1182-0-60431600-1322062247_thumb.jp

Link to comment
Share on other sites
Terryz_ Newbie

Terryz_

Posted
  • Author
Posted

After researching on the net, realised that there is no need for a dosing pump to do dosing of foods... Any equipment that can provide constant mixing of the food content in the water and have a airtube size outlet that can be controlled with a air valve is sufficient.

Such as Kalk Reactor as shown on RC's NPS subforum... Or for my case, I am using my Aquamedic Denitrator that have been sitting around for months... It provides circulation in the Denitrator and it has a airtube size outlet, but downside is I need a small pump to pump the water into the denitrator, will see if can make use of gravity feed...

Just to list out the thing that I will require if anyone is interested in trying out...

1. Airtube

2. Syringe (the tip should be able fit into a airtube)

3. 3-way connector

4. 2 pcs of air control valve

5. Foods

6. Denitrator/Kalk Reactor

I will be doing a quick one tonight and see if it will work, based on the theory, it should work...

Member of:

post-1182-0-60431600-1322062247_thumb.jp

Link to comment
Share on other sites
  • SRC Member
kueytoc Newbie

kueytoc

Posted
  • SRC Member
Posted

:rolleyes: Interesting...show some pics of the setup & results thereafter. ;)

After researching on the net, realised that there is no need for a dosing pump to do dosing of foods... Any equipment that can provide constant mixing of the food content in the water and have a airtube size outlet that can be controlled with a air valve is sufficient.

Such as Kalk Reactor as shown on RC's NPS subforum... Or for my case, I am using my Aquamedic Denitrator that have been sitting around for months... It provides circulation in the Denitrator and it has a airtube size outlet, but downside is I need a small pump to pump the water into the denitrator, will see if can make use of gravity feed...

Just to list out the thing that I will require if anyone is interested in trying out...

1. Airtube

2. Syringe (the tip should be able fit into a airtube)

3. 3-way connector

4. 2 pcs of air control valve

5. Foods

6. Denitrator/Kalk Reactor

I will be doing a quick one tonight and see if it will work, based on the theory, it should work...

banana.gifbanana.gifbanana.gifWRASSEY REEF PARADISE 4ftx2.5ftx2.5ft

SRC Site: Welcome to My World of WRASSEYS !!!

CHUISUI Site: WRASSEY World of REEF Paradise !!!

mio CAN-REEF Site: Wrassey World !!!

SiamReefClub Site: WRASSEY MASTER

VorTech4.jpg

Hyper ไฮเปอร์ ; Silly Fools ; Labanoon ; I-Nam ไอน้ำ ; Modern Dog ; Sirasak Ittipolpanish ; Annita - Nisita Pongsong

old_trafford2.jpg

Twin-CAMs Power Module ! ; MIO Dream Car ! ; MIO Alter-EGO !

Link to comment
Share on other sites
Terryz_ Newbie

Terryz_

Posted
  • Author
Posted

bro just get a second dosing pump lo save you trouble =.=

No circulation in the food mixture, it will spoil overnight... At least i think if got circulation will last longer... What I am worried about is the the clogging of the outlet if all the food settles...

Member of:

post-1182-0-60431600-1322062247_thumb.jp

Link to comment
Share on other sites
  • SRC Member
BFG Newbie

BFG

Posted
  • SRC Member
Posted

If you're going with the one at RC in the NPS section, think you need air pump or was it the Tom's aqualifter pump to push out the food. But that person said the food will turn bad after 18hr and the amount is quite large, I do not know how many bottles of Fauna Marin Product you're going to use weekly. The troublesome part is to clean the food container.

My suggestion is to pre mix those food and freeze them in ice cube tray. You could just dump these into an area where they will melt and release the food into the water column. Your phosphate and nitrate will rise though as documented on that thread at RC. Weekly water change is what that person recommended.

Link to comment
Share on other sites
  • SRC Supporter
Joe_P Experienced

Joe_P

Posted
  • SRC Supporter
Posted

If you're going with the one at RC in the NPS section, think you need air pump or was it the Tom's aqualifter pump to push out the food. But that person said the food will turn bad after 18hr and the amount is quite large, I do not know how many bottles of Fauna Marin Product you're going to use weekly. The troublesome part is to clean the food container.

My suggestion is to pre mix those food and freeze them in ice cube tray. You could just dump these into an area where they will melt and release the food into the water column. Your phosphate and nitrate will rise though as documented on that thread at RC. Weekly water change is what that person recommended.

have you considered using the TLF NanoMag to clean the internal of the food container/reactor ?

TLF NanoMag

"The NanoMag also glides across the curved surfaces of fish bowls, wiping off algal films with ease.."

I'm actually also considering buildin a reactor similar to a Kalk Reactor but with some additional features for this purpose as I'm runnin a 2 footer NPS system linked to my main SPS reef. Intention would be to apply frozen cubes of food in various mixtures as mentioned by Bro BFG and adding them into the reactor via a union opening. Live feeds like rotifers and copepods could also be applied to this unit, plus frozen algae paste and cyclopreeze..

Also considering using thisSeko PR1 Timer adjustable Internal Rinse Aid Pump as a means to feed a constant water supply to the reactor. Like the adjustable flow rate feature. :thumbsup:

Reckon if the pump is adjusted properly, the reactor should be emptied of food particles on a daily basis and a short cleaning session with the NanoMag should be able to minimise or better, eliminate the requirement to clean it. :eyebrow:

Link to comment
Share on other sites
Terryz_ Newbie

Terryz_

Posted
  • Author
Posted (edited)

If you're going with the one at RC in the NPS section, think you need air pump or was it the Tom's aqualifter pump to push out the food. But that person said the food will turn bad after 18hr and the amount is quite large, I do not know how many bottles of Fauna Marin Product you're going to use weekly. The troublesome part is to clean the food container.

My suggestion is to pre mix those food and freeze them in ice cube tray. You could just dump these into an area where they will melt and release the food into the water column. Your phosphate and nitrate will rise though as documented on that thread at RC. Weekly water change is what that person recommended.

The Aquamedic Denitrator have built in pump to pump out the water thru a airtube size outlet... So that solve the problem of having a Tom aqualifter... I am no going to use all FaunaMarin, the cost is going to be a huge amount.. I am using primarily Cyclopeeze and Nannochloropsis with some addition of FaunaMarin foods... Oh ya, I am pumping in the foods on a daily basis...

Edited by Terryz_

Member of:

post-1182-0-60431600-1322062247_thumb.jp

Link to comment
Share on other sites
Terryz_ Newbie

Terryz_

Posted
  • Author
Posted

have you considered using the TLF NanoMag to clean the internal of the food container/reactor ?

TLF NanoMag

"The NanoMag also glides across the curved surfaces of fish bowls, wiping off algal films with ease.."

I'm actually also considering buildin a reactor similar to a Kalk Reactor but with some additional features for this purpose as I'm runnin a 2 footer NPS system linked to my main SPS reef. Intention would be to apply frozen cubes of food in various mixtures as mentioned by Bro BFG and adding them into the reactor via a union opening. Live feeds like rotifers and copepods could also be applied to this unit, plus frozen algae paste and cyclopreeze..

Also considering using thisSeko PR1 Timer adjustable Internal Rinse Aid Pump as a means to feed a constant water supply to the reactor. Like the adjustable flow rate feature. :thumbsup:

Reckon if the pump is adjusted properly, the reactor should be emptied of food particles on a daily basis and a short cleaning session with the NanoMag should be able to minimise or better, eliminate the requirement to clean it. :eyebrow:

Actually the denitrator is relatively easy to take apart and clean... Didnt think of that actually... LOL..

I am interested to see how the reactor would turn out... Hehe...

I am actually trying this out since I have a equipment that cannot be sold lying around at home... And it sort of met the requirements... If really cannot work den will opt for other options...

Member of:

post-1182-0-60431600-1322062247_thumb.jp

Link to comment
Share on other sites
Terryz_ Newbie

Terryz_

Posted
  • Author
Posted

The clear airtube is the inlet for the water from the tank...

Added a 3-way joint so that I can pump food into the denitrator...

The black airtube is the outlet with a control valve...

IMAG0407.jpg

Member of:

post-1182-0-60431600-1322062247_thumb.jp

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 6

      Decommissioning Sales of 5f Reef Tank

      Pmed u Sent from my SM-S906E using Tapatalk
      chriskessha in Sell off/Pasar Malam Shop
    2. 0

      Carleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,Carleton University

      Carleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,Carleton UniversityCarleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,Carleton UniversityCarleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证 【实体公司】QQ/微信751558146办理毕业证，成绩单，教育部学历学位认证，使馆认证，归国人员证明，修改成绩单+信封申请学校，offer录取通知书，在读证明，普利茅斯大学学位证书，Plymouth毕业文凭。 ★★主营项目： ◆办理真实使馆公证(即留学回国人员证明,免费申请货后付款,不成功不收费!!!) ◆办理教育部国外学历学位认证。(网上可查、永久存档、快速稳妥,回国发展,考公务员,落户,进国企,外企,创业,无忧愁) ◆办理各国各大学文凭(世界名校一对一专业服务,可全程监控跟踪进度) ◆提供整套申请学校材料 ◆可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的普利茅斯大学毕业证、百分之百让您绝对满意、设计,印刷,DHL快递;毕业证、成绩单7个工作日,真实大使馆教育部认证2个月。 【真实可查】---【永久存档】---【安全可靠】---【值得信赖】 八年从业经验,专业指导,私人定制,倾心为您解决留学毕业回国各种疑难问题 <1>教育部学历学位认证服务: 做到真实永久存档，网上轻易可查，绝对对客户的资料进行保密，登录核实后再付款。 <2>为什么您的学位需要在国内进一步认证？ 二：留信认证的作用 1：该专业认证可证明留学生真实留学身份。 2：同时对留学生所学专业等级给予评定。 3：国家专业人才认证中心颁发入库证书 4：这个入网证书并且可以归档到地方 5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在公安部网内查询个人身份证信息后，同步读取人 才网入库信息。 6：个人职称评审加20分。 7：个人信誉贷款加10分。 8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才。
      wfe45345 in Members Tank & Specs
    3. 0

      办理!!美国MU毕业证*成绩单＠Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University

      办理!!美国MU毕业证*成绩单＠Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University办理!!美国MU毕业证*成绩单＠Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University办理!!美国MU毕业证*成绩单＠Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University 【实体公司】QQ/微信751558146办理毕业证，成绩单，教育部学历学位认证，使馆认证，归国人员证明，修改成绩单+信封申请学校，offer录取通知书，在读证明，普利茅斯大学学位证书，Plymouth毕业文凭。 ★★主营项目： ◆办理真实使馆公证(即留学回国人员证明,免费申请货后付款,不成功不收费!!!) ◆办理教育部国外学历学位认证。(网上可查、永久存档、快速稳妥,回国发展,考公务员,落户,进国企,外企,创业,无忧愁) ◆办理各国各大学文凭(世界名校一对一专业服务,可全程监控跟踪进度) ◆提供整套申请学校材料 ◆可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的普利茅斯大学毕业证、百分之百让您绝对满意、设计,印刷,DHL快递;毕业证、成绩单7个工作日,真实大使馆教育部认证2个月。 【真实可查】---【永久存档】---【安全可靠】---【值得信赖】 八年从业经验,专业指导,私人定制,倾心为您解决留学毕业回国各种疑难问题 <1>教育部学历学位认证服务: 做到真实永久存档，网上轻易可查，绝对对客户的资料进行保密，登录核实后再付款。 <2>为什么您的学位需要在国内进一步认证？ 二：留信认证的作用 1：该专业认证可证明留学生真实留学身份。 2：同时对留学生所学专业等级给予评定。 3：国家专业人才认证中心颁发入库证书 4：这个入网证书并且可以归档到地方 5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在公安部网内查询个人身份证信息后，同步读取人 才网入库信息。 6：个人职称评审加20分。 7：个人信誉贷款加10分。 8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才。
      wfe45345 in Members Tank & Specs
    4. 0

      办理!!美国BU毕业证*成绩单＠Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor University

      办理!!美国BU毕业证*成绩单＠Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor University办理!!美国BU毕业证*成绩单＠Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor Unive 【实体公司】QQ/微信751558146办理毕业证，成绩单，教育部学历学位认证，使馆认证，归国人员证明，修改成绩单+信封申请学校，offer录取通知书，在读证明，普利茅斯大学学位证书，Plymouth毕业文凭。 ★★主营项目： ◆办理真实使馆公证(即留学回国人员证明,免费申请货后付款,不成功不收费!!!) ◆办理教育部国外学历学位认证。(网上可查、永久存档、快速稳妥,回国发展,考公务员,落户,进国企,外企,创业,无忧愁) ◆办理各国各大学文凭(世界名校一对一专业服务,可全程监控跟踪进度) ◆提供整套申请学校材料 ◆可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的普利茅斯大学毕业证、百分之百让您绝对满意、设计,印刷,DHL快递;毕业证、成绩单7个工作日,真实大使馆教育部认证2个月。 【真实可查】---【永久存档】---【安全可靠】---【值得信赖】 八年从业经验,专业指导,私人定制,倾心为您解决留学毕业回国各种疑难问题 <1>教育部学历学位认证服务: 做到真实永久存档，网上轻易可查，绝对对客户的资料进行保密，登录核实后再付款。 <2>为什么您的学位需要在国内进一步认证？ 二：留信认证的作用 1：该专业认证可证明留学生真实留学身份。 2：同时对留学生所学专业等级给予评定。 3：国家专业人才认证中心颁发入库证书 4：这个入网证书并且可以归档到地方 5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在公安部网内查询个人身份证信息后，同步读取人 才网入库信息。 6：个人职称评审加20分。 7：个人信誉贷款加10分。 8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才。 sity办理!!美国BU毕业证*成绩单＠Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor University
      wfe45345 in Members Tank & Specs
    5. 0

      UWO Diploma毕业证,西安大略大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,University of Western Ontario

      UWO Diploma毕业证,西安大略大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,University of Western OntarioUWO Diploma毕业证,西安大略大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,University of Western OntarioUWO Diploma毕业证,西安大略大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证, 【实体公司】QQ/微信751558146办理毕业证，成绩单，教育部学历学位认证，使馆认证，归国人员证明，修改成绩单+信封申请学校，offer录取通知书，在读证明，普利茅斯大学学位证书，Plymouth毕业文凭。 ★★主营项目： ◆办理真实使馆公证(即留学回国人员证明,免费申请货后付款,不成功不收费!!!) ◆办理教育部国外学历学位认证。(网上可查、永久存档、快速稳妥,回国发展,考公务员,落户,进国企,外企,创业,无忧愁) ◆办理各国各大学文凭(世界名校一对一专业服务,可全程监控跟踪进度) ◆提供整套申请学校材料 ◆可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的普利茅斯大学毕业证、百分之百让您绝对满意、设计,印刷,DHL快递;毕业证、成绩单7个工作日,真实大使馆教育部认证2个月。 【真实可查】---【永久存档】---【安全可靠】---【值得信赖】 八年从业经验,专业指导,私人定制,倾心为您解决留学毕业回国各种疑难问题 <1>教育部学历学位认证服务: 做到真实永久存档，网上轻易可查，绝对对客户的资料进行保密，登录核实后再付款。 <2>为什么您的学位需要在国内进一步认证？ 二：留信认证的作用 1：该专业认证可证明留学生真实留学身份。 2：同时对留学生所学专业等级给予评定。 3：国家专业人才认证中心颁发入库证书 4：这个入网证书并且可以归档到地方 5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在公安部网内查询个人身份证信息后，同步读取人 才网入库信息。 6：个人职称评审加20分。 7：个人信誉贷款加10分。 8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才。 育部认证,University of Western Ontario
      wfe45345 in Members Tank & Specs
×
×
  • Create New...