Jump to content

Revamping of a reef tank

Vlamingi_cont

By Vlamingi_cont,
in General Reefkeeping_

 Share

Recommended Posts

  • SRC Member
Vlamingi_cont Newbie

Vlamingi_cont

Posted
  • SRC Member
Posted

Guys as you all can tell by looking at my tank thread tht's submerged somewhere in this forum <_< tht i've taken a break from reefing... So i'm seeking for ideas on revamping my tank as in LS and refresh some old stuffs with me if u guys don't mind! :P

With the utmost appreciation,

Vlamingi_cont :thanks:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites
yongshun Newbie

yongshun

Posted
Posted

haha go upgrade to a bigger tank lar bro hehe


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6
Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites
  • Senior Reefer
yikai Newbie

yikai

Posted
  • Senior Reefer
Posted

there's not much choices since your tank is not that big. with a big tank you can do reef, FOWLR, predator tank, etc etc. for a small tank like yours, there's basically only reef tank. since FOWLR and predator etc require much bigger tanks.

why don't you just restart and keep nano fishes with soft corals? or try to make a nicer reef tank! or upgrade

Link to comment
Share on other sites
MarcoVan Enthusiast

MarcoVan

Posted
Posted
there's not much choices since your tank is not that big. with a big tank you can do reef, FOWLR, predator tank, etc etc. for a small tank like yours, there's basically only reef tank. since FOWLR and predator etc require much bigger tanks.

why don't you just restart and keep nano fishes with soft corals? or try to make a nicer reef tank! or upgrade

^ +1

HUAT HUAT Reefing,

Marc J.

Happy Reefing,

Marc J.

Link to comment
Share on other sites
  • SRC Member
Vlamingi_cont Newbie

Vlamingi_cont

Posted
  • Author
  • SRC Member
Posted
there's not much choices since your tank is not that big. with a big tank you can do reef, FOWLR, predator tank, etc etc. for a small tank like yours, there's basically only reef tank. since FOWLR and predator etc require much bigger tanks.

why don't you just restart and keep nano fishes with soft corals? or try to make a nicer reef tank! or upgrade

Hmmm... Good idea for the nano fishes and soft corals but i think i would remove my damsel, remove coral skeletons and restart! But i don't think i'll re cycle the whole thing... :whistle

Livestocks i want to keep:

1 Mystery wrasse (if i can hunt for a mini one) :huh:

2 Tank bred wierdo percs... (2 stripes kind) :heh:

2 Anthias

1 Yellow Tang or other tangs

That's abt all and for gems...

I intend to start with a few frags of Monti and acros will then gradually put in more frags this time no colonies just frags (i'll try to stick to this) And Zoas and Chalices and most probably rics... If i can afford :erm: otherwise 2-3 polyps and wait for off spring... :peace:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites
  • SRC Member
TayHongSiang Newbie

TayHongSiang

Posted
  • SRC Member
Posted
Hmmm... Good idea for the nano fishes and soft corals but i think i would remove my damsel, remove coral skeletons and restart! But i don't think i'll re cycle the whole thing... :whistle

Livestocks i want to keep:

1 Mystery wrasse (if i can hunt for a mini one) :huh:

2 Tank bred wierdo percs... (2 stripes kind) :heh:

2 Anthias

1 Yellow Tang or other tangs

That's abt all and for gems...

I intend to start with a few frags of Monti and acros will then gradually put in more frags this time no colonies just frags (i'll try to stick to this) And Zoas and Chalices and most probably rics... If i can afford :erm: otherwise 2-3 polyps and wait for off spring... :peace:

Slowly increase yr livestocks and corals bit by bit...most impt is to have a rockscape to place your gems that is easy and manageable.

l7304smr.jpg
Link to comment
Share on other sites
  • SRC Member
Vlamingi_cont Newbie

Vlamingi_cont

Posted
  • Author
  • SRC Member
Posted
try to skip any tangs... go for small fishes. better.

Ok... Maybe i'll get firefishes?? :eyebrow:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites
  • SRC Member
Vlamingi_cont Newbie

Vlamingi_cont

Posted
  • Author
  • SRC Member
Posted
Slowly increase yr livestocks and corals bit by bit...most impt is to have a rockscape to place your gems that is easy and manageable.

Ok... rockscape will ref from nanoreef or some of the tanks in this forum! :lol::lol::lol:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites
Gouldian Newbie

Gouldian

Posted
Posted
Guys as you all can tell by looking at my tank thread tht's submerged somewhere in this forum <_< tht i've taken a break from reefing... So i'm seeking for ideas on revamping my tank as in LS and refresh some old stuffs with me if u guys don't mind! :P

With the utmost appreciation,

Vlamingi_cont :thanks:

Welcome back! Looking forward to seeing your new set-up. ;)

"Reefs, like forests, will only be protected in long term if they are appreciated"
Dr. J.E.N. Veron
Australian Institute of Marine Science

-----------------------------------------------------------------------

Member of:

post-1182-0-60431600-1322062247_thumb.jp

post-2241-0-43391700-1354511230.png

UEN: T08SS0098F
Please visit us here: http://www.facebook....uaristSocietySG
Facebook Group: http://www.facebook....gid=34281892381

Link to comment
Share on other sites
jackywongto Newbie

jackywongto

Posted
Posted
Ok... rockscape will ref from nanoreef or some of the tanks in this forum! :lol::lol::lol:

yah give imcosmokramer a heads-up and he can recommend you which tank thread in NR to check out :)

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites
  • SRC Member
Vlamingi_cont Newbie

Vlamingi_cont

Posted
  • Author
  • SRC Member
Posted
what are you thinking as far as aquascaping.

Hmmm... i want more open space for fishes to swim and still get enough placing for my corals... :eyebrow: Do u hav got a great example for me to follow?? :thanks:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites
  • SRC Member
Vlamingi_cont Newbie

Vlamingi_cont

Posted
  • Author
  • SRC Member
Posted
Welcome back! Looking forward to seeing your new set-up. ;)

Thanks mod Gouldian! :P

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites
  • SRC Member
Vlamingi_cont Newbie

Vlamingi_cont

Posted
  • Author
  • SRC Member
Posted
what are you thinking as far as aquascaping.

Also seeing ur reef tools link u've got a nice sps tank! :wub:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites
  • SRC Member
Vlamingi_cont Newbie

Vlamingi_cont

Posted
  • Author
  • SRC Member
Posted
thank you.

Did I miss the new tank dimension?

Nope its 40 gallons right? :eyebrow:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites
  • SRC Member
Vlamingi_cont Newbie

Vlamingi_cont

Posted
  • Author
  • SRC Member
Posted
Another Nano incoming! Look forward to see your setup!

Hope it wouldn't be choked with hair algae and flourish with sps... :rolleyes:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites
  • SRC Member
Vlamingi_cont Newbie

Vlamingi_cont

Posted
  • Author
  • SRC Member
Posted
seems like the picture didnt come out :lol:

post-15983-1266560658_thumb.jpg

That's one big inspiration for me! :yeah::yeah::yeah: Will be working towards that... Now whr to start?? :huh:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites
  • SRC Member
Vlamingi_cont Newbie

Vlamingi_cont

Posted
  • Author
  • SRC Member
Posted

Well the Anthias tt survived... :erm:

post-14611-1266754392_thumb.jpg

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites
  • SRC Member
bugattilambo Newbie

bugattilambo

Posted
  • SRC Member
Posted
That's one big inspiration for me! :yeah::yeah::yeah: Will be working towards that... Now whr to start?? :huh:

Hey bro willing to help u revamp ur tank :rolleyes:

Pain is temporary. It may last a minute, or an hour, or a day, or a year, but eventually it will subside and something else will take its place. If I quit, however, it lasts forever.


Member of:
www.marineaquarist.sg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 6

      Decommissioning Sales of 5f Reef Tank

      Pmed u Sent from my SM-S906E using Tapatalk
      chriskessha in Sell off/Pasar Malam Shop
    2. 0

      Carleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,Carleton University

      Carleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,Carleton UniversityCarleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,Carleton UniversityCarleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证 【实体公司】QQ/微信751558146办理毕业证，成绩单，教育部学历学位认证，使馆认证，归国人员证明，修改成绩单+信封申请学校，offer录取通知书，在读证明，普利茅斯大学学位证书，Plymouth毕业文凭。 ★★主营项目： ◆办理真实使馆公证(即留学回国人员证明,免费申请货后付款,不成功不收费!!!) ◆办理教育部国外学历学位认证。(网上可查、永久存档、快速稳妥,回国发展,考公务员,落户,进国企,外企,创业,无忧愁) ◆办理各国各大学文凭(世界名校一对一专业服务,可全程监控跟踪进度) ◆提供整套申请学校材料 ◆可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的普利茅斯大学毕业证、百分之百让您绝对满意、设计,印刷,DHL快递;毕业证、成绩单7个工作日,真实大使馆教育部认证2个月。 【真实可查】---【永久存档】---【安全可靠】---【值得信赖】 八年从业经验,专业指导,私人定制,倾心为您解决留学毕业回国各种疑难问题 <1>教育部学历学位认证服务: 做到真实永久存档，网上轻易可查，绝对对客户的资料进行保密，登录核实后再付款。 <2>为什么您的学位需要在国内进一步认证？ 二：留信认证的作用 1：该专业认证可证明留学生真实留学身份。 2：同时对留学生所学专业等级给予评定。 3：国家专业人才认证中心颁发入库证书 4：这个入网证书并且可以归档到地方 5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在公安部网内查询个人身份证信息后，同步读取人 才网入库信息。 6：个人职称评审加20分。 7：个人信誉贷款加10分。 8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才。
      wfe45345 in Members Tank & Specs
    3. 0

      办理!!美国MU毕业证*成绩单＠Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University

      办理!!美国MU毕业证*成绩单＠Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University办理!!美国MU毕业证*成绩单＠Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University办理!!美国MU毕业证*成绩单＠Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University 【实体公司】QQ/微信751558146办理毕业证，成绩单，教育部学历学位认证，使馆认证，归国人员证明，修改成绩单+信封申请学校，offer录取通知书，在读证明，普利茅斯大学学位证书，Plymouth毕业文凭。 ★★主营项目： ◆办理真实使馆公证(即留学回国人员证明,免费申请货后付款,不成功不收费!!!) ◆办理教育部国外学历学位认证。(网上可查、永久存档、快速稳妥,回国发展,考公务员,落户,进国企,外企,创业,无忧愁) ◆办理各国各大学文凭(世界名校一对一专业服务,可全程监控跟踪进度) ◆提供整套申请学校材料 ◆可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的普利茅斯大学毕业证、百分之百让您绝对满意、设计,印刷,DHL快递;毕业证、成绩单7个工作日,真实大使馆教育部认证2个月。 【真实可查】---【永久存档】---【安全可靠】---【值得信赖】 八年从业经验,专业指导,私人定制,倾心为您解决留学毕业回国各种疑难问题 <1>教育部学历学位认证服务: 做到真实永久存档，网上轻易可查，绝对对客户的资料进行保密，登录核实后再付款。 <2>为什么您的学位需要在国内进一步认证？ 二：留信认证的作用 1：该专业认证可证明留学生真实留学身份。 2：同时对留学生所学专业等级给予评定。 3：国家专业人才认证中心颁发入库证书 4：这个入网证书并且可以归档到地方 5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在公安部网内查询个人身份证信息后，同步读取人 才网入库信息。 6：个人职称评审加20分。 7：个人信誉贷款加10分。 8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才。
      wfe45345 in Members Tank & Specs
    4. 0

      办理!!美国BU毕业证*成绩单＠Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor University

      办理!!美国BU毕业证*成绩单＠Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor University办理!!美国BU毕业证*成绩单＠Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor Unive 【实体公司】QQ/微信751558146办理毕业证，成绩单，教育部学历学位认证，使馆认证，归国人员证明，修改成绩单+信封申请学校，offer录取通知书，在读证明，普利茅斯大学学位证书，Plymouth毕业文凭。 ★★主营项目： ◆办理真实使馆公证(即留学回国人员证明,免费申请货后付款,不成功不收费!!!) ◆办理教育部国外学历学位认证。(网上可查、永久存档、快速稳妥,回国发展,考公务员,落户,进国企,外企,创业,无忧愁) ◆办理各国各大学文凭(世界名校一对一专业服务,可全程监控跟踪进度) ◆提供整套申请学校材料 ◆可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的普利茅斯大学毕业证、百分之百让您绝对满意、设计,印刷,DHL快递;毕业证、成绩单7个工作日,真实大使馆教育部认证2个月。 【真实可查】---【永久存档】---【安全可靠】---【值得信赖】 八年从业经验,专业指导,私人定制,倾心为您解决留学毕业回国各种疑难问题 <1>教育部学历学位认证服务: 做到真实永久存档，网上轻易可查，绝对对客户的资料进行保密，登录核实后再付款。 <2>为什么您的学位需要在国内进一步认证？ 二：留信认证的作用 1：该专业认证可证明留学生真实留学身份。 2：同时对留学生所学专业等级给予评定。 3：国家专业人才认证中心颁发入库证书 4：这个入网证书并且可以归档到地方 5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在公安部网内查询个人身份证信息后，同步读取人 才网入库信息。 6：个人职称评审加20分。 7：个人信誉贷款加10分。 8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才。 sity办理!!美国BU毕业证*成绩单＠Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor University
      wfe45345 in Members Tank & Specs
    5. 0

      UWO Diploma毕业证,西安大略大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,University of Western Ontario

      UWO Diploma毕业证,西安大略大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,University of Western OntarioUWO Diploma毕业证,西安大略大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,University of Western OntarioUWO Diploma毕业证,西安大略大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证, 【实体公司】QQ/微信751558146办理毕业证，成绩单，教育部学历学位认证，使馆认证，归国人员证明，修改成绩单+信封申请学校，offer录取通知书，在读证明，普利茅斯大学学位证书，Plymouth毕业文凭。 ★★主营项目： ◆办理真实使馆公证(即留学回国人员证明,免费申请货后付款,不成功不收费!!!) ◆办理教育部国外学历学位认证。(网上可查、永久存档、快速稳妥,回国发展,考公务员,落户,进国企,外企,创业,无忧愁) ◆办理各国各大学文凭(世界名校一对一专业服务,可全程监控跟踪进度) ◆提供整套申请学校材料 ◆可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的普利茅斯大学毕业证、百分之百让您绝对满意、设计,印刷,DHL快递;毕业证、成绩单7个工作日,真实大使馆教育部认证2个月。 【真实可查】---【永久存档】---【安全可靠】---【值得信赖】 八年从业经验,专业指导,私人定制,倾心为您解决留学毕业回国各种疑难问题 <1>教育部学历学位认证服务: 做到真实永久存档，网上轻易可查，绝对对客户的资料进行保密，登录核实后再付款。 <2>为什么您的学位需要在国内进一步认证？ 二：留信认证的作用 1：该专业认证可证明留学生真实留学身份。 2：同时对留学生所学专业等级给予评定。 3：国家专业人才认证中心颁发入库证书 4：这个入网证书并且可以归档到地方 5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在公安部网内查询个人身份证信息后，同步读取人 才网入库信息。 6：个人职称评审加20分。 7：个人信誉贷款加10分。 8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才。 育部认证,University of Western Ontario
      wfe45345 in Members Tank & Specs
×
×
  • Create New...