Jump to content

Runaway mushies


beaver
 Share

Recommended Posts

  • SRC Member
Hi Reefers,

As above, is super glue good enuff to stick the mushies in place? Any recommendations? or any brand will do?

:thanks:

You can just leave the polyp in your frag tray ontop of some live rock rubble and allow the polyp to passively attach down over the course of 2-4 weeks or you can use a small piece of citrus net bag to envelope over the polyp on a piece of live rock, such that the polyp is loosely (but firm enough that it can't escape it's position) sandwiched between the netting and the live rock you want it attached to. Use a couple of rubber bands to wrap the live rock chunk and netting such that the polyp is held firmly in place. You don't want the netting so tight that is cutting or squishing the polyp. Leave the netting in place for at least 2 weeks before cutting off the rubber bands. Don't peel off the citrus netting right away. Allow it to slowly loosen on it's own such that it frees itself from the polyp over the course of a day. When it looks like the netting is free and the polyp is still attached in place, you can remove the netting. Keep the polyp on its live rock inside the frag tray for a few more days to ensure that the attachment is complete.

Alternatively, you can glue the polyps onto one piece of live rock. A piece of citrus netting loosely wrapped over the the rock and secured with rubber bands will ensure that the super glued polyps do not come off the larger rock and float away. When simply gluing these polyps onto one big rock, you can expect about 80% success rate for staying attached, first time around. The citrus netting can be removed from the rock after about a week, and the polyp should be securing attached.

By the way, you should use Super Glue Gel not super glue.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member

buy a $3 betta/ guppy breeding box...

top view : top view-- box filled abt 2mm THICK with coral rubble (NOT SAND)...must be abt at least 2mm in diameter..larger is fine...

front view...u can also stick it on ur back glass or side glass whichever u like...IMPT-- make sure it does't get too much light...must be low light... too high light shrooms might melt...in abt 1 week the shroom will adhere to the coral sand...then glue the coral sand (not the mushroom tissue/ base) to any rock or coral chip u like...

can remove the box n keep/ put chaeto / put zoa frags in future..

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...