Jump to content

My 2 ft cube ...


digibee
 Share

Recommended Posts

  • SRC Member
What happened? U sure it's dead and not "disappear" as they love to burrow and hide in sand.

101% dead...put in the betta box this morning and called my mom just now and she said is long gone my yellow and purple wrasse :pinch:

God Blessed all who appreciate His wonderful and beautiful creations.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

my first reef aquarium 15jan2010

3x2x2ft EOS 10mm tank with sump//deltec sc2060 skimmer//arctica 1/10hp chiller

maxpect g2 170w led//vortech mp40w wavemaker//eheim 1262 universal pump

eheim compact+ 3000 chiller pump//caribsea ocean direct live sands 40lbs

and other misc...

Link to comment
Share on other sites

  • SRC Member
101% dead...put in the betta box this morning and called my mom just now and she said is long gone my yellow and purple wrasse :pinch:

your mum found the body?

i used to have one,

and there was once it went into hiding for about 4days..

i thought it was dead until one morning i woke up to see it swimming happily...

My Decomissioned 2ft Cube: (31st March 2011)

Carpe Diem~!!!

My Current 4ft X 2ft X 2ft:

Link to comment
Share on other sites

101% dead...put in the betta box this morning and called my mom just now and she said is long gone my yellow and purple wrasse :pinch:

Sorry for your loss bro.

sometimes, some fishes just cannot make it regardless of tank conditions.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
your mum found the body?

i used to have one,

and there was once it went into hiding for about 4days..

i thought it was dead until one morning i woke up to see it swimming happily...

it was hiding but came out yesterday morning lying flat and breathless so i put it in the betta box. By afternoon, it has gone in peace. :cry:

God Blessed all who appreciate His wonderful and beautiful creations.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

my first reef aquarium 15jan2010

3x2x2ft EOS 10mm tank with sump//deltec sc2060 skimmer//arctica 1/10hp chiller

maxpect g2 170w led//vortech mp40w wavemaker//eheim 1262 universal pump

eheim compact+ 3000 chiller pump//caribsea ocean direct live sands 40lbs

and other misc...

Link to comment
Share on other sites

  • SRC Member
Sorry for your loss bro.

sometimes, some fishes just cannot make it regardless of tank conditions.

that was my first casualty..should have asked my mom to take a pic before its last breath.. :cry:

God Blessed all who appreciate His wonderful and beautiful creations.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

my first reef aquarium 15jan2010

3x2x2ft EOS 10mm tank with sump//deltec sc2060 skimmer//arctica 1/10hp chiller

maxpect g2 170w led//vortech mp40w wavemaker//eheim 1262 universal pump

eheim compact+ 3000 chiller pump//caribsea ocean direct live sands 40lbs

and other misc...

Link to comment
Share on other sites

  • SRC Member

Hi, bought this fish last weekend; I thought it is a hawkfish; but it is not.

Geometric Pigmy Basslet (Plectranthias inermis)

post-16860-1265121723_thumb.png

Some write up about this fish:

"The Geometric Flame Basslet, sometimes referred to as a hawkfish, is rare and recent in the aquarium trade.

It is white with bright red blotches. It may bother small crabs shrimp and crustaceans, but is otherwise reef safe.

Its small size makes it ideal for nano or species tanks. Hawkfish will feed on small meaty foods such as

plankton or fortified brine shrimp. They are reef safe."

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

  • SRC Member

:rolleyes: Nice piece...not rare as they do come in quite often especially over at Ah Beng or CF.

CF usually stock less than 1 inch sizes. Do watch out for ya Sexy or Anemone Shrimps though if U happen to keep them in ya tanky.

Link to comment
Share on other sites

  • SRC Member
:rolleyes: Nice piece...not rare as they do come in quite often especially over at Ah Beng or CF.

CF usually stock less than 1 inch sizes. Do watch out for ya Sexy or Anemone Shrimps though if U happen to keep them in ya tanky.

Yeah, not rare here.

The write up is from a US website :rolleyes:

I think it is rare there.

We are quite fortunate in terms of marine hobby; I guessed.

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

  • SRC Member

Hi, I have a question,

can you epoxy or superglue zoas with no rocks onto the rocks?

If can, how? Safest method.

Because I have 2 zoas with no rocks; and they were often blown off by the wavemaker.

Thanks!

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

  • SRC Member
Hi, I have a question,

can you epoxy or superglue zoas with no rocks onto the rocks?

If can, how? Safest method.

Because I have 2 zoas with no rocks; and they were often blown off by the wavemaker.

Thanks!

would suggest you to superglue the zoas to small rock base to add on to the weight of the zoas so that it will not be blown away... then after if you want, can epoxy the small base to your LR..

HTH

Ray

A man with a reef tank is a man with an empty wallet...

Link to comment
Share on other sites

  • SRC Member
So far, most reefers i know suggest don't epoxy corals to rocks as later you have problem removing it.. i suggest you place it away from your wavebox..

I see, ok thanks!

But sometimes, it is toppled off by fish/snails too.

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

  • SRC Member
would suggest you to superglue the zoas to small rock base to add on to the weight of the zoas so that it will not be blown away... then after if you want, can epoxy the small base to your LR..

HTH

Ray

Ok, good idea .... now have to find small rocks!

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

Ok, good idea .... now have to find small rocks!

Those large coral chips will do nicely too.

can cut the chip to shorter length if the elongated shape is an eyesore.

I kept the ones in your 2026 previously :)

can pass you some if you need them. :P

I am going to separate all my zoas into frags of ten polyps on these chips.

Pros - can ensure survival if one of the frags caught disease.

- can see growth / decline easier

- can sell if wanted

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
Those large coral chips will do nicely too.

can cut the chip to shorter length if the elongated shape is an eyesore.

I kept the ones in your 2026 previously :)

can pass you some if you need them. :P

I am going to separate all my zoas into frags of ten polyps on these chips.

Pros - can ensure survival if one of the frags caught disease.

- can see growth / decline easier

- can sell if wanted

I see. Ok will sms you if I need a couple of coral chips.

I thought zoas will anchor themselves onto the rock; but doesn't happen after a week.

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

I see. Ok will sms you if I need a couple of coral chips.

I thought zoas will anchor themselves onto the rock; but doesn't happen after a week.

They do. I tucked Peter's frag of 7 polups into a hole on a rock.

It is firmly encrusted now with 20+ polyps.

probably take about 2 - 3 weeks to secure themselves.

Hey btw, I will meet you guys later.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
They do. I tucked Peter's frag of 7 polups into a hole on a rock.

It is firmly encrusted now with 20+ polyps.

probably take about 2 - 3 weeks to secure themselves.

Hey btw, I will meet you guys later.

can catch up later! Think we might have to make areservation if the grp gets bigger. :eyebrow: fun!

Link to comment
Share on other sites

  • SRC Member
ya.. same problem last night

Yeah, upgrading issue.

Anyway, I am looking for filter sock to tie to my return pipe into the sump;

this is to reduce bubbles .... as I think more bubbles are seen in my tank.

No wonder I could not take a clear picture these days!

My pipe diameter is about 2 inch.

Not sure where to get the filter sock though.

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Carleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146¥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,Carleton University

    2. 0

      办理!!美国MU毕业证*成绩单@Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University

    3. 0

      办理!!美国BU毕业证*成绩单@Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor University

    4. 0

      UWO Diploma毕业证,西安大略大学毕业证——Q微信751558146¥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,University of Western Ontario

×
×
  • Create New...