Jump to content

My 2 ft cube ...


digibee
 Share

Recommended Posts

  • SRC Member
I killed 2 of mine. left one as an exhibit.

either epoxy over it or take a sharp toothpick, poke it straight into the mouth when it is opened wide, twist and turn the toothpick. it will melt and die instantly.

Wow, not sure I can do that ...

May be just dip it in freshwater and let it come off the rock.

I can't tell a good anemone from a majano anemone!!

LFS still sell majano!!

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

  • Senior Reefer

majanos are never good..... there are some that look nicer and more decorative only. that's all. the good thing about majano is that they move slowly and reproduce slowly... compared to aiptasia. however, like most anemones, they CAN move and will move if they don't like where they are. most of the time one assume they don't move because they are already in a favourable place.

they are also harder to kill than aiptasia IMO..... don't leave any bits behind when killing because these bits and pieces can and MAY grow into new ones.

i prefer them over aiptasias. aiptasias are just horrible... spread and grow so fast

Link to comment
Share on other sites

  • SRC Member
take a sharp toothpick, poke it straight into the mouth when it is opened wide, twist and turn the toothpick. it will melt and die instantly.

wow.. violent!

good plot for SAW 7 :eyebrow:

have not seen one before..

hope i will never see any of those in my tank..

My Decomissioned 2ft Cube: (31st March 2011)

Carpe Diem~!!!

My Current 4ft X 2ft X 2ft:

Link to comment
Share on other sites

  • SRC Member

Hi, the majano anemone is gone;

I put the liverock with majano on it into a pail of fresh water;

After about 15 minutes; the majano became smaller and disintegrate (dissapear!).

A little bit wierd and spooky!

Anyway, I have reduced my bio-load a little; by giving away the melarnus wrasse (getting big and nipped at my zoas)

and the large green brain coral.

Brown algae starting to take over my tank.

Tried Bioclean yesterday ... see how it goes ...

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

  • SRC Member
Hi, the majano anemone is gone;

I put the liverock with majano on it into a pail of fresh water;

After about 15 minutes; the majano became smaller and disintegrate (dissapear!).

A little bit wierd and spooky!

Anyway, I have reduced my bio-load a little; by giving away the melarnus wrasse (getting big and nipped at my zoas)

and the large green brain coral.

Brown algae starting to take over my tank.

Tried Bioclean yesterday ... see how it goes ...

interesting....

l7304smr.jpg
Link to comment
Share on other sites

  • SRC Member
Anyway, I have reduced my bio-load a little; by giving away the melarnus wrasse (getting big and nipped at my zoas)

and the large green brain coral.

is it called hoeven wrasse?

http://www.liveaquaria.com/product/prod_di...amp;pcatid=2285

God Blessed all who appreciate His wonderful and beautiful creations.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

my first reef aquarium 15jan2010

3x2x2ft EOS 10mm tank with sump//deltec sc2060 skimmer//arctica 1/10hp chiller

maxpect g2 170w led//vortech mp40w wavemaker//eheim 1262 universal pump

eheim compact+ 3000 chiller pump//caribsea ocean direct live sands 40lbs

and other misc...

Link to comment
Share on other sites

Hi, the majano anemone is gone;

I put the liverock with majano on it into a pail of fresh water;

After about 15 minutes; the majano became smaller and disintegrate (dissapear!).

A little bit wierd and spooky!

Anyway, I have reduced my bio-load a little; by giving away the melarnus wrasse (getting big and nipped at my zoas)

and the large green brain coral.

Brown algae starting to take over my tank.

Tried Bioclean yesterday ... see how it goes ...

They can shrink really small and hide somewhere.

I thought mine is dead once but it reappeared after a few days.

hope your doesn't.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
They can shrink really small and hide somewhere.

I thought mine is dead once but it reappeared after a few days.

hope your doesn't.

Ok, saw its body yesterday night; and managed to pull it off the rock.

By the way, my Vortech MP40 could not go into feed mode this morning.

Anyone got this experience; care to guide me?

It is still functioning; just that when I press the mode button for a few seconds;

it does not go into blinking white light; it went into red blue light.

Let me know if anyone out there know how to fix this.

Thanks!

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

Ok, saw its body yesterday night; and managed to pull it off the rock.

By the way, my Vortech MP40 could not go into feed mode this morning.

Anyone got this experience; care to guide me?

It is still functioning; just that when I press the mode button for a few seconds;

it does not go into blinking white light; it went into red blue light.

Let me know if anyone out there know how to fix this.

Thanks!

did u try resetting?

if it still does not work, then can try master resetting:

to do the Master reset, just follow below simple step, but need 2 person:

1st hold mode (pump blinks white)

after that hold mode and press set button together (pump blinks yellow/white)

last step ask someone pull out the power cord (without release the hold mode & set button) then put it back in

and it should be back to normal

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
did u try resetting?

if it still does not work, then can try master resetting:

to do the Master reset, just follow below simple step, but need 2 person:

1st hold mode (pump blinks white)

after that hold mode and press set button together (pump blinks yellow/white)

last step ask someone pull out the power cord (without release the hold mode & set button) then put it back in

and it should be back to normal

No, cannot even go the blinks white mode.

Anyway, already replaced the driver with the new one.

Cheers!

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

  • SRC Member
did u try resetting?

if it still does not work, then can try master resetting:

to do the Master reset, just follow below simple step, but need 2 person:

1st hold mode (pump blinks white)

after that hold mode and press set button together (pump blinks yellow/white)

last step ask someone pull out the power cord (without release the hold mode & set button) then put it back in

and it should be back to normal

Wow...Jacky the MP40 expert... :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member

I did some re-scaping of liverocks yesterday night;

Now I could not find my flamehawk!!

Could I have accidentally pinned him under the rock or between rocks??

Getting quite worried; did not notice him coming our for dinner just now.

Have been looking with torch light for an hour .....

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

  • SRC Member
I did some re-scaping of liverocks yesterday night;

Now I could not find my flamehawk!!

Could I have accidentally pinned him under the rock or between rocks??

Getting quite worried; did not notice him coming our for dinner just now.

Have been looking with torch light for an hour .....

aiyo.. i will pray for your flamehawk :angel: and will come out soon.

God Blessed all who appreciate His wonderful and beautiful creations.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

my first reef aquarium 15jan2010

3x2x2ft EOS 10mm tank with sump//deltec sc2060 skimmer//arctica 1/10hp chiller

maxpect g2 170w led//vortech mp40w wavemaker//eheim 1262 universal pump

eheim compact+ 3000 chiller pump//caribsea ocean direct live sands 40lbs

and other misc...

Link to comment
Share on other sites

  • SRC Member
Wow, that icon --> :angel:

is like rip!!

lol..no la..thats an angel praying la..

God Blessed all who appreciate His wonderful and beautiful creations.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

my first reef aquarium 15jan2010

3x2x2ft EOS 10mm tank with sump//deltec sc2060 skimmer//arctica 1/10hp chiller

maxpect g2 170w led//vortech mp40w wavemaker//eheim 1262 universal pump

eheim compact+ 3000 chiller pump//caribsea ocean direct live sands 40lbs

and other misc...

Link to comment
Share on other sites

  • SRC Member
I did some re-scaping of liverocks yesterday night;

Now I could not find my flamehawk!!

Could I have accidentally pinned him under the rock or between rocks??

Getting quite worried; did not notice him coming our for dinner just now.

Have been looking with torch light for an hour .....

Doubt that you will be able to pin any healthy fish beneath or between rocks. Possibility of that happening is really quite slim. Suspect that it is hiding somewhere. Give it time and it should appear. :upsidedown:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member

Hiya, very sad ...

Went to search again just now in the dark using torch light ...

The flamehawk was in between the glass of the IOS front piece!!

I thought it is still alive; but sad to say ... it was dead already when I push it out using a long carton board.

Hmmm... why must the IOS have this extra piece of glass for the gap?

I have already use netting to close the top part; .... did not know there is gap from below also!!

Nothing to say...

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

  • SRC Member
Hiya, very sad ...

Went to search again just now in the dark using torch light ...

The flamehawk was in between the glass of the IOS front piece!!

I thought it is still alive; but sad to say ... it was dead already when I push it out using a long carton board.

Hmmm... why must the IOS have this extra piece of glass for the gap?

I have already use netting to close the top part; .... did not know there is gap from below also!!

Nothing to say...

May your flamehawk RIP... i couldnt find one of my barlett anthias also... suddenly only see 3 instead of 4.. keeping my fingers crossed!

Link to comment
Share on other sites

  • SRC Member
May your flamehawk RIP... i couldnt find one of my barlett anthias also... suddenly only see 3 instead of 4.. keeping my fingers crossed!

Thanks,

going to get some plastic wire mesh later during lunch time to block off the gap of the front piece IOS.

Your tank is huge; so I think your fish may be missing and re-appear now and then.

But if it is a school of fishes; better keep all fingers crossed!

Wonder when can I get a nice small flamehawk again...

Missing my one already...

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

  • SRC Member
Thanks,

going to get some plastic wire mesh later during lunch time to block off the gap of the front piece IOS.

Your tank is huge; so I think your fish may be missing and re-appear now and then.

But if it is a school of fishes; better keep all fingers crossed!

Wonder when can I get a nice small flamehawk again...

Missing my one already...

ehh.. digibee... i bought some wire mesh the other day... i rem i promise to pass you some right? :paiseh:

If you want, can collect from me.. just cut whatever amount u need lor :P i stay in AMK area though. :P

Link to comment
Share on other sites

  • SRC Member
ehh.. digibee... i bought some wire mesh the other day... i rem i promise to pass you some right? :paiseh:

If you want, can collect from me.. just cut whatever amount u need lor :P i stay in AMK area though. :P

Hey, any chance you are in cityhall area today?

If not, nevermind; maybe can bring when you are getting frags from Creetin.

I bought a pouch from Daiso, which has cloth netting on 1 side.

Thought will try to use that to stuff the gap.

Thanks!

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

  • SRC Member
Hiya, very sad ...

Went to search again just now in the dark using torch light ...

The flamehawk was in between the glass of the IOS front piece!!

I thought it is still alive; but sad to say ... it was dead already when I push it out using a long carton board.

Hmmm... why must the IOS have this extra piece of glass for the gap?

I have already use netting to close the top part; .... did not know there is gap from below also!!

Nothing to say...

sob sob... my yellow wrasse just passed away :cry2:

God Blessed all who appreciate His wonderful and beautiful creations.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

my first reef aquarium 15jan2010

3x2x2ft EOS 10mm tank with sump//deltec sc2060 skimmer//arctica 1/10hp chiller

maxpect g2 170w led//vortech mp40w wavemaker//eheim 1262 universal pump

eheim compact+ 3000 chiller pump//caribsea ocean direct live sands 40lbs

and other misc...

Link to comment
Share on other sites

  • SRC Member
Hey, any chance you are in cityhall area today?

If not, nevermind; maybe can bring when you are getting frags from Creetin.

I bought a pouch from Daiso, which has cloth netting on 1 side.

Thought will try to use that to stuff the gap.

Thanks!

At work now.. pass you on sat then:P

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Carleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146¥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,Carleton University

    2. 0

      办理!!美国MU毕业证*成绩单@Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University

    3. 0

      办理!!美国BU毕业证*成绩单@Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor University

    4. 0

      UWO Diploma毕业证,西安大略大学毕业证——Q微信751558146¥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,University of Western Ontario

×
×
  • Create New...