Jump to content

My 2 ft cube ...


digibee
 Share

Recommended Posts

  • SRC Member

Hi, do you guys switch off the return pump while feeding?

If I do not switch off, some of my cyclopeze flow to the sump.

I bought the frozen cyclopeze from AM.

Most of my small fish feed on this cyclopeze, including clown goby and dragonet.

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

  • SRC Member
Hi, do you guys switch off the return pump while feeding?

If I do not switch off, some of my cyclopeze flow to the sump.

I bought the frozen cyclopeze from AM.

Most of my small fish feed on this cyclopeze, including clown goby and dragonet.

Yup, switch off the return pump and wavemakers when feeding.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member

Hi, any advise on controlling or getting rid of aiptapsia?

Currently already saw 4 to 5 aiptapsia growing on my liverocks.

I was thinking of getting a couple of peppermint shrimp.

Thanks!

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

Hi, any advise on controlling or getting rid of aiptapsia?

Currently already saw 4 to 5 aiptapsia growing on my liverocks.

I was thinking of getting a couple of peppermint shrimp.

Thanks!

I heard its hit or miss with peppermint shrimps.

some eat but some don't. same as with copperband butterfly.

Then there is some aiptasia killing liquids which can be bought off the shelf.

I have nvr tackle them before so I cannot really comment on anything.

Just a thought: What if you just take some epoxy and stick over them.

That will might kill them right

There will be some ugly looking epoxy but I am sure you can use some corals/ frags to cover it up.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
Hi, any advise on controlling or getting rid of aiptapsia?

Currently already saw 4 to 5 aiptapsia growing on my liverocks.

I was thinking of getting a couple of peppermint shrimp.

Thanks!

Your copperband not eating ah? :shock:

God Blessed all who appreciate His wonderful and beautiful creations.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

my first reef aquarium 15jan2010

3x2x2ft EOS 10mm tank with sump//deltec sc2060 skimmer//arctica 1/10hp chiller

maxpect g2 170w led//vortech mp40w wavemaker//eheim 1262 universal pump

eheim compact+ 3000 chiller pump//caribsea ocean direct live sands 40lbs

and other misc...

Link to comment
Share on other sites

  • SRC Member
I heard its hit or miss with peppermint shrimps.

some eat but some don't. same as with copperband butterfly.

Then there is some aiptasia killing liquids which can be bought off the shelf.

I have nvr tackle them before so I cannot really comment on anything.

Just a thought: What if you just take some epoxy and stick over them.

That will might kill them right

There will be some ugly looking epoxy but I am sure you can use some corals/ frags to cover it up.

Not sure using epoxy will totally kill them;

seemed like they can retract into the rocks.

Guessed will try the aiptasia killing liquids.

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

  • SRC Member
Your copperband not eating ah? :shock:

My small copperband got stucked in the IOS.

Luckily managed to remove him this morning.

Poor fella; I think he got a bit of a shocked.

Now in hiding .... will double check again when reach home tonight.

Still waiting for him to clear those aiptasia though.

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

Not sure using epoxy will totally kill them;

seemed like they can retract into the rocks.

Guessed will try the aiptasia killing liquids.

I killed mojano pest that way.

just epoxy them (stuff the hole) and make sure they are all sealed in the epoxy.

When the epoxy harden, the pest will die.

But yeah, maybe the liquid way is much better.

good luck & keep us posted.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member

Managed to change partial water tonight.

While doing so; saw a small hairy crab and a worm in two different live rocks;

Felt uneasy ..... so at last made the decision to take out those rocks and dip into tap water ....

Within minutes; out came the crab and the worm.

But only managed to pull out half of the worm ... wonder the other half still alive and will grow back?!?

Did not manage to take pics of them though ... flushed them straight into the toilet bowl ...!!

Hence did some re-scaping ... but actually not much as did not manage to find nice live rocks last weekend.

Here are the pics ...:

post-16860-1263835372_thumb.jpg

post-16860-1263835384_thumb.jpg

My clown goby playing with the purple firefish ....

post-16860-1263835421_thumb.jpg

These are the n.snails marking I am talking about .... they do that now and then.

post-16860-1263835446_thumb.jpg

Trying to feed the plate coral and sun coral .... but these 2 n.snails rushed in and snatch away a big chunk of prawn!!

Suncoral not that healthy ... due to leaving in the ikea tub for a few weeks!

Plate coral to my surprise is very hardy!!

post-16860-1263835984_thumb.jpg

post-16860-1263835408_thumb.jpg

TorchCoral

post-16860-1263835520_thumb.jpg

SPS ... birdnest and radioactive ....from cedricang

birdnest a little bit injured while trying to epoxy ... hope it is alright

post-16860-1263835507_thumb.jpg

post-16860-1263835433_thumb.jpg

Cheers and good night!

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

  • SRC Member
These are the n.snails marking I am talking about .... they do that now and then.

post-16860-1263835446_thumb.jpg

wow.. the snails leave quite alot of marking on the wall.. :shock:

do you have to manually scrap them off?

or does it go off over time..

My Decomissioned 2ft Cube: (31st March 2011)

Carpe Diem~!!!

My Current 4ft X 2ft X 2ft:

Link to comment
Share on other sites

  • SRC Member
wow.. the snails leave quite alot of marking on the wall.. :shock:

do you have to manually scrap them off?

or does it go off over time..

Yeah, have to manually scrap them off; it is quite easy to clean them.

At first I thought they are eggs; but then again may be not.

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

  • SRC Member

Very nice scaping, like twin peaks :lol:

God Blessed all who appreciate His wonderful and beautiful creations.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

my first reef aquarium 15jan2010

3x2x2ft EOS 10mm tank with sump//deltec sc2060 skimmer//arctica 1/10hp chiller

maxpect g2 170w led//vortech mp40w wavemaker//eheim 1262 universal pump

eheim compact+ 3000 chiller pump//caribsea ocean direct live sands 40lbs

and other misc...

Link to comment
Share on other sites

Hi Luke.

Nvr seen those marks before in my tank.

Maybe take that snail out or swop it out.

Feeding the suns - I fed my suns too huge a chunck of prawn the last time.

Their well being deterioriated after that.

Have since feed them 1 -2 mysis shrimp per head every week. (you can do twice a week too.)

They are doing ok now.

Would suggest you feed mysis too and pass the prawn. Less harmful I think especially if the prawn is not finely chopped and is too huge a chunk.

Also do a check if they spit out the prawn the next day.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
Hi Luke.

Nvr seen those marks before in my tank.

Maybe take that snail out or swop it out.

Feeding the suns - I fed my suns too huge a chunck of prawn the last time.

Their well being deterioriated after that.

Have since feed them 1 -2 mysis shrimp per head every week. (you can do twice a week too.)

They are doing ok now.

Would suggest you feed mysis too and pass the prawn. Less harmful I think especially if the prawn is not finely chopped and is too huge a chunk.

Also do a check if they spit out the prawn the next day.

Yeah, a few pieces which are too big did not consume by the sun.

Found them on the sand this morning.

Should have chopped smaller pieces.

But my prata swallowed 1 big chunk yesterday; hope it is ok.

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

By the way, thinking of changing my light stand; currently in aluminium; to wood.

Not sure it is viable. Will check and update.

Any suggestion also welcome.

Ever thought of using acrylic?

you can opt for either black acrylic or clear ones.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
Yeah, a few pieces which are too big did not consume by the sun.

Found them on the sand this morning.

Should have chopped smaller pieces.

But my prata swallowed 1 big chunk yesterday; hope it is ok.

Prata can eat big chunks of fish/prawn/clam etc, no problem. My prata previously ate one of my clown fishes that died... :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

Hiya!

Side track abit ..... :rolleyes:

Been busy with this beauty last few days!

Also, saw a few people selling nice corals and fish .... making me so gian...

Cheers!

Taken with iPhone...

post-16860-1264143308_thumb.jpg

post-16860-1264143315_thumb.jpg

so sweet! sleeping so soundly.

this beats any corals/ fishes sale in the world man.

Just saw your post above. will PM you the contact later.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
Hiya!

Side track abit ..... :rolleyes:

Been busy with this beauty last few days!

Also, saw a few people selling nice corals and fish .... making me so gian...

Cheers!

Taken with iPhone...

post-16860-1264143308_thumb.jpg

post-16860-1264143315_thumb.jpg

You didnt miss much la.. hehezz.. family is more impt anyway.. Have you name your princess?

God Blessed all who appreciate His wonderful and beautiful creations.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

my first reef aquarium 15jan2010

3x2x2ft EOS 10mm tank with sump//deltec sc2060 skimmer//arctica 1/10hp chiller

maxpect g2 170w led//vortech mp40w wavemaker//eheim 1262 universal pump

eheim compact+ 3000 chiller pump//caribsea ocean direct live sands 40lbs

and other misc...

Link to comment
Share on other sites

  • SRC Member
You didnt miss much la.. hehezz.. family is more impt anyway.. Have you name your princess?

yeah, her name is Aevia.

Will be back to reefing this weekend;

need to get a couple of live rocks!

Cheers!

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Carleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146¥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,Carleton University

    2. 0

      办理!!美国MU毕业证*成绩单@Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University

    3. 0

      办理!!美国BU毕业证*成绩单@Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor University

    4. 0

      UWO Diploma毕业证,西安大略大学毕业证——Q微信751558146¥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,University of Western Ontario

×
×
  • Create New...