Solo77 Posted November 10, 2009 Share Posted November 10, 2009 Hi, will be decomming my 2ft cube tank in 2 to 4 weeks time. The tank will come with MH(can't remember whether it is 150 or 250), DIY T5(2 tubes to 4 tubes), 2ft cube, piping(durso pipe), sump, cabinet, return pump(ehiem, dont know whether it is 1260 or 1262) and a pump for FR(atman i think). I do have a H & S skimmer(in sump for 850l type) and will let go if price is right, if too low, i will be keeping it as spare as i like its performance. Condition of the tank is about 7 to 8/10(depending on your expectation) as there are scratches. Tank should be 3 yrs old and using 10mm glass. Pm me if interested. Thanks for viewing. Quote Tank : 4 X 2 X 2 with low iron front panel and external overflow Skimmer : BK SM200 with waste collector Return Pumps : Red Dragon 6m3 and Ehiem 1262 FR : 2 X Deltec 509 & powered by AB2000 Nitrate Filter : Deltec NF 509 and tee off from AB2000 Calcium R'tor : Deltec PF 501 with RM secondary chamber Kalkwasser R'tor : Deltec KM500 Chiller : Pansonic 1 HP Compressor with 20m titanium Coil Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w Controller : GHL Profilux Lighting : ATI Powermodule 10 or 8 tubes Water Top-up : Water Top-Up tank powered by Tunze Osmolator External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox Ozonizer : Sander C50 UV : Corallife 6x Algae Scrubbler Link to comment Share on other sites More sharing options...
stevenkoh08 Posted November 10, 2009 Share Posted November 10, 2009 are u able to upload the photo of all stuff Quote Link to comment Share on other sites More sharing options...
SRC Member bugattilambo Posted November 10, 2009 SRC Member Share Posted November 10, 2009 Pm send bro Quote Pain is temporary. It may last a minute, or an hour, or a day, or a year, but eventually it will subside and something else will take its place. If I quit, however, it lasts forever. Member of: www.marineaquarist.sg Link to comment Share on other sites More sharing options...
SRC Member oceanviper Posted November 10, 2009 SRC Member Share Posted November 10, 2009 Hi, will be decomming my 2ft cube tank in 2 to 4 weeks time. The tank will come with MH(can't remember whether it is 150 or 250), DIY T5(2 tubes to 4 tubes), 2ft cube, piping(durso pipe), sump, cabinet, return pump(ehiem, dont know whether it is 1260 or 1262) and a pump for FR(atman i think). I do have a H & S skimmer(in sump for 850l type) and will let go if price is right, if too low, i will be keeping it as spare as i like its performance. Condition of the tank is about 7 to 8/10(depending on your expectation) as there are scratches. Tank should be 3 yrs old and using 10mm glass. Pm me if interested. Thanks for viewing. Hi bro.... Any pictures? Quote Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 ) Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7 Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 ) Compressor drop-in coil Wavemaker : Tunze 6105 x 1 Lights : Modular based DIY LED light x 4 Chaeto in the sump Link to comment Share on other sites More sharing options...
Solo77 Posted November 10, 2009 Author Share Posted November 10, 2009 Thks for those who pmed. Will upload the pic soon. Quote Tank : 4 X 2 X 2 with low iron front panel and external overflow Skimmer : BK SM200 with waste collector Return Pumps : Red Dragon 6m3 and Ehiem 1262 FR : 2 X Deltec 509 & powered by AB2000 Nitrate Filter : Deltec NF 509 and tee off from AB2000 Calcium R'tor : Deltec PF 501 with RM secondary chamber Kalkwasser R'tor : Deltec KM500 Chiller : Pansonic 1 HP Compressor with 20m titanium Coil Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w Controller : GHL Profilux Lighting : ATI Powermodule 10 or 8 tubes Water Top-up : Water Top-Up tank powered by Tunze Osmolator External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox Ozonizer : Sander C50 UV : Corallife 6x Algae Scrubbler Link to comment Share on other sites More sharing options...
Solo77 Posted November 10, 2009 Author Share Posted November 10, 2009 Here are the photos, sorry for the blurness. I reserve the rights to sell to whoever i deem sincere. I am looking around $200 for all. Hope it is reasonable. No reservation until viewing is done, unless buyer willing to put deposit without any viewing(hope buyer will view to avoid unnecessary misunderstanding). Will be rather busy due to house cleaning, etc. Hence, arrangement of viewing will be at my convenience(got dog and baby, hence can't be too late(below 9 pm)). Got Live sand, dead sand, live rocks and dead rocks can be given FOC for scaping purpose. Should have more than enough as i will be decomm all my QT tank and transfer them to my new tank. Thanks for viewing. Quote Tank : 4 X 2 X 2 with low iron front panel and external overflow Skimmer : BK SM200 with waste collector Return Pumps : Red Dragon 6m3 and Ehiem 1262 FR : 2 X Deltec 509 & powered by AB2000 Nitrate Filter : Deltec NF 509 and tee off from AB2000 Calcium R'tor : Deltec PF 501 with RM secondary chamber Kalkwasser R'tor : Deltec KM500 Chiller : Pansonic 1 HP Compressor with 20m titanium Coil Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w Controller : GHL Profilux Lighting : ATI Powermodule 10 or 8 tubes Water Top-up : Water Top-Up tank powered by Tunze Osmolator External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox Ozonizer : Sander C50 UV : Corallife 6x Algae Scrubbler Link to comment Share on other sites More sharing options...
Solo77 Posted November 10, 2009 Author Share Posted November 10, 2009 $200 for the following items; MH(can't remember whether it is 150 or 250), DIY T5(2 tubes to 4 tubes), 2ft cube, piping(durso pipe), sump, cabinet, return pump(ehiem, dont know whether it is 1260 or 1262) and a pump for FR(atman i think). I do have 2 tubes DE lighting, 4 tubes AM retrofit lighting and solite 2 tube lighting. Can package in if you want to go full T5. Also got quite a number of ben timers, if buyer is interested and maybe other items which i gathered for my new tank setup. Thanks for viewing. Quote Tank : 4 X 2 X 2 with low iron front panel and external overflow Skimmer : BK SM200 with waste collector Return Pumps : Red Dragon 6m3 and Ehiem 1262 FR : 2 X Deltec 509 & powered by AB2000 Nitrate Filter : Deltec NF 509 and tee off from AB2000 Calcium R'tor : Deltec PF 501 with RM secondary chamber Kalkwasser R'tor : Deltec KM500 Chiller : Pansonic 1 HP Compressor with 20m titanium Coil Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w Controller : GHL Profilux Lighting : ATI Powermodule 10 or 8 tubes Water Top-up : Water Top-Up tank powered by Tunze Osmolator External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox Ozonizer : Sander C50 UV : Corallife 6x Algae Scrubbler Link to comment Share on other sites More sharing options...
SRC Member oceanviper Posted November 10, 2009 SRC Member Share Posted November 10, 2009 Here are the photos, sorry for the blurness. I reserve the rights to sell to whoever i deem sincere. I am looking around $200 for all. Hope it is reasonable. No reservation until viewing is done, unless buyer willing to put deposit without any viewing(hope buyer will view to avoid unnecessary misunderstanding). Will be rather busy due to house cleaning, etc. Hence, arrangement of viewing will be at my convenience(got dog and baby, hence can't be too late(below 9 pm)). Got Live sand, dead sand, live rocks and dead rocks can be given FOC for scaping purpose. Should have more than enough as i will be decomm all my QT tank and transfer them to my new tank. Thanks for viewing. Hi bro.... PM you already....for details..... Thanks, Quote Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 ) Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7 Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 ) Compressor drop-in coil Wavemaker : Tunze 6105 x 1 Lights : Modular based DIY LED light x 4 Chaeto in the sump Link to comment Share on other sites More sharing options...
kanegan Posted November 10, 2009 Share Posted November 10, 2009 Hi bro, I am following up on your advice in my thread. Is the ehiem 1262? Will you sell it separately? Quote Link to comment Share on other sites More sharing options...
Solo77 Posted November 10, 2009 Author Share Posted November 10, 2009 hi bro, to calculate the return pump requirement, maybe you want to calculate the volume of water in your tank and sump. Then determine the replacement rate, some bro here advised 10x will be good and some think otherwise. You also need to consider the pipe sizes for your return and to sump to determine whether you can use more powerful pump. I can't sell you separately as i thought it will be good to package the deal as almost complete to benefit the buyer. However, if the buyer dont want, i can sell to you. I do have one AB5000 which i might be selling but dont know whether you can use. You can get sunny03 to advice you...lol. he is one of my masters. ... Quote Tank : 4 X 2 X 2 with low iron front panel and external overflow Skimmer : BK SM200 with waste collector Return Pumps : Red Dragon 6m3 and Ehiem 1262 FR : 2 X Deltec 509 & powered by AB2000 Nitrate Filter : Deltec NF 509 and tee off from AB2000 Calcium R'tor : Deltec PF 501 with RM secondary chamber Kalkwasser R'tor : Deltec KM500 Chiller : Pansonic 1 HP Compressor with 20m titanium Coil Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w Controller : GHL Profilux Lighting : ATI Powermodule 10 or 8 tubes Water Top-up : Water Top-Up tank powered by Tunze Osmolator External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox Ozonizer : Sander C50 UV : Corallife 6x Algae Scrubbler Link to comment Share on other sites More sharing options...
chanbi Posted November 11, 2009 Share Posted November 11, 2009 Will u be selling off your Deltec FR? Just trying my luck.. Quote Link to comment Share on other sites More sharing options...
SRC Member teebs Posted November 11, 2009 SRC Member Share Posted November 11, 2009 hi bro, to calculate the return pump requirement, maybe you want to calculate the volume of water in your tank and sump. Then determine the replacement rate, some bro here advised 10x will be good and some think otherwise. You also need to consider the pipe sizes for your return and to sump to determine whether you can use more powerful pump. I can't sell you separately as i thought it will be good to package the deal as almost complete to benefit the buyer. However, if the buyer dont want, i can sell to you. I do have one AB5000 which i might be selling but dont know whether you can use. You can get sunny03 to advice you...lol. he is one of my masters. ... How much u intend to sell your AB5000 for? Quote My Setup: 3x2x2 tank with IOS Equipment List: Chiller: Artica 1/5HP Chiller Pump: Sicce 4000 Return Pump: OR3500 Skimmer: Deltec APF600 Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker Lights: DElighting 2x150W MH + 2x 39W T5 Atinic FR: Skimz FR Pump: Atman AT-104 Tubby ATO, Kalkweisser Reactor with magnetic stirrer. Link to comment Share on other sites More sharing options...
Solo77 Posted November 11, 2009 Author Share Posted November 11, 2009 Hi Bro, will be recycling this for my 4ft tank. I think Bro Reddevil is selling his. You can try to pm him. Will u be selling off your Deltec FR? Just trying my luck.. Quote Tank : 4 X 2 X 2 with low iron front panel and external overflow Skimmer : BK SM200 with waste collector Return Pumps : Red Dragon 6m3 and Ehiem 1262 FR : 2 X Deltec 509 & powered by AB2000 Nitrate Filter : Deltec NF 509 and tee off from AB2000 Calcium R'tor : Deltec PF 501 with RM secondary chamber Kalkwasser R'tor : Deltec KM500 Chiller : Pansonic 1 HP Compressor with 20m titanium Coil Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w Controller : GHL Profilux Lighting : ATI Powermodule 10 or 8 tubes Water Top-up : Water Top-Up tank powered by Tunze Osmolator External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox Ozonizer : Sander C50 UV : Corallife 6x Algae Scrubbler Link to comment Share on other sites More sharing options...
Solo77 Posted November 11, 2009 Author Share Posted November 11, 2009 Hi, not sure, maybe you can offer but priority will be given to Bro Kanegan as he knows my master in reefing. Appreciate your understanding. Thanks. How much u intend to sell your AB5000 for? Quote Tank : 4 X 2 X 2 with low iron front panel and external overflow Skimmer : BK SM200 with waste collector Return Pumps : Red Dragon 6m3 and Ehiem 1262 FR : 2 X Deltec 509 & powered by AB2000 Nitrate Filter : Deltec NF 509 and tee off from AB2000 Calcium R'tor : Deltec PF 501 with RM secondary chamber Kalkwasser R'tor : Deltec KM500 Chiller : Pansonic 1 HP Compressor with 20m titanium Coil Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w Controller : GHL Profilux Lighting : ATI Powermodule 10 or 8 tubes Water Top-up : Water Top-Up tank powered by Tunze Osmolator External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox Ozonizer : Sander C50 UV : Corallife 6x Algae Scrubbler Link to comment Share on other sites More sharing options...
Solo77 Posted November 11, 2009 Author Share Posted November 11, 2009 Dear all, Thanks for those who pmed me and showed their interests. Someone is viewing the tank later. Will inform the next in line if the buyer decided not to buy. Thanks for your attention. p/s: Pardon my messy tank as i am housing fishes for my new tank. Quote Tank : 4 X 2 X 2 with low iron front panel and external overflow Skimmer : BK SM200 with waste collector Return Pumps : Red Dragon 6m3 and Ehiem 1262 FR : 2 X Deltec 509 & powered by AB2000 Nitrate Filter : Deltec NF 509 and tee off from AB2000 Calcium R'tor : Deltec PF 501 with RM secondary chamber Kalkwasser R'tor : Deltec KM500 Chiller : Pansonic 1 HP Compressor with 20m titanium Coil Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w Controller : GHL Profilux Lighting : ATI Powermodule 10 or 8 tubes Water Top-up : Water Top-Up tank powered by Tunze Osmolator External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox Ozonizer : Sander C50 UV : Corallife 6x Algae Scrubbler Link to comment Share on other sites More sharing options...
kanegan Posted November 11, 2009 Share Posted November 11, 2009 Thanks bro! Will wait for your update. Quote Link to comment Share on other sites More sharing options...
Solo77 Posted November 11, 2009 Author Share Posted November 11, 2009 tentatively reserved by reefer after viewing. Thanks for the interests. Quote Tank : 4 X 2 X 2 with low iron front panel and external overflow Skimmer : BK SM200 with waste collector Return Pumps : Red Dragon 6m3 and Ehiem 1262 FR : 2 X Deltec 509 & powered by AB2000 Nitrate Filter : Deltec NF 509 and tee off from AB2000 Calcium R'tor : Deltec PF 501 with RM secondary chamber Kalkwasser R'tor : Deltec KM500 Chiller : Pansonic 1 HP Compressor with 20m titanium Coil Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w Controller : GHL Profilux Lighting : ATI Powermodule 10 or 8 tubes Water Top-up : Water Top-Up tank powered by Tunze Osmolator External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox Ozonizer : Sander C50 UV : Corallife 6x Algae Scrubbler Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.