Jump to content

Help on Reef Water Testing


jkit
 Share

Recommended Posts

Dear Reefers,

I don't want to harm mother nature by buying anymore corals till i find the root cause and provide a solution.

Problem: Zoa not opening and melted away. Anemone tentacles became stubs then entire melted away. Seafan breaking down slowly - branches left skeleton, turning black but main trunk still opening.

Crime scene: 40G tank. No chiller (temp avg 28-30). 30 white LED, 30 blue LED, no T5. No skimmer but WC with NSW 20% every 2wks once. Turbo snail just KIA. Remaining 3 Damsels, 1 tang, 1 maroon clown, 1 cleaner shrimp.

Investigation: I tested PH ok. I added iodine, didn't help. I added reef complete (calcium+strontium), didn't help. Since I WC regularly, i don't think it's nitrate too high. Furthermore, cleaner shrimp molted 4 times so I think water is ok with this sensitive invert. I do notice more green and red algae ever since i on the LED more frequently in day bcoz I thought corals not enough light. I can't be certain of calcium bcoz I don't hv tester.

Does anyone know what's wrong?

Does anyone know what should I test? I don't have iodine test or calcium test. Estimated 1 cap reef complete every 2 wk.

Does anyone have spare kit to help test? I don't want to buy wrong tester and additives.

Really appreciate if someone can help because I really want the clown to have a nice anemone home again. Thanks in advance.

Link to comment
Share on other sites

  • SRC Member

Dun quite get your sequence of events. It will help if you list what KIA first.

Some Zoa dun do well with LED.

Anemone always dies without a valid reason thus shunt by advance reefers.

Seafan need high flow, less lights.

Equipment:

30G Corner Tank with 10G Sump, 2 x 24W artinic T5, 1 x 24W 10K, 1x 24W 20K, 3" Grade 0 sand & Live rocks, Activated Carbon, Bio-home, 2 x Seio M620, Hailea 1/2HP Chiller, Redsea Pro Skimmer

Live Stock:

Turbo Snail x 1, Green Mandarin Dragonet X 2, Blue Tang X 2, True percular x 2, 1 x Algae Bleenie, Clarke clown x 2

Reef:

1 x 2" Blue maxima, Red/Brown/Purple Mushroom (Discosoma), Pink Ricordea yuma, A little colony Brown/Green common Zoanthus, Red/Pink/Green US Zoanthus, Eagle-eye Zoathus, 14 Branch Goniopora Pandoraensis, 1 Starburst Polyps, 3 + 2 Branch Frogspawn, 4 Blasto, palythoa, Cheato

RIPs (Since June 2005):

1. Sabae clown (KO by Clarke clown) 2. 1 branch melted frogspawn 4 branch 3. Golden maxima (Ripe the base off rock by me) 4. Algae Bleenie x 2 (Starvation) 5. Blue Maxima x 1, 2 x Maxima, 1 x frogspawn, rics (Overtemp...)

Old 30G Corner Tank.

Restarted 30G Corner Tank.

Link to comment
Share on other sites

Dear Reefers,

I don't want to harm mother nature by buying anymore corals till i find the root cause and provide a solution.

Problem: Zoa not opening and melted away. Anemone tentacles became stubs then entire melted away. Seafan breaking down slowly - branches left skeleton, turning black but main trunk still opening.

Crime scene: 40G tank. No chiller (temp avg 28-30). 30 white LED, 30 blue LED, no T5. No skimmer but WC with NSW 20% every 2wks once. Turbo snail just KIA. Remaining 3 Damsels, 1 tang, 1 maroon clown, 1 cleaner shrimp.

Investigation: I tested PH ok. I added iodine, didn't help. I added reef complete (calcium+strontium), didn't help. Since I WC regularly, i don't think it's nitrate too high. Furthermore, cleaner shrimp molted 4 times so I think water is ok with this sensitive invert. I do notice more green and red algae ever since i on the LED more frequently in day bcoz I thought corals not enough light. I can't be certain of calcium bcoz I don't hv tester.

Does anyone know what's wrong?

Does anyone know what should I test? I don't have iodine test or calcium test. Estimated 1 cap reef complete every 2 wk.

Does anyone have spare kit to help test? I don't want to buy wrong tester and additives.

Really appreciate if someone can help because I really want the clown to have a nice anemone home again. Thanks in advance.

Why don't you share with us your know parameter first?

SG,PH,CA,KH,MG,NO3,PO4,Temperature

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

  • SRC Member

Sea fans are not easy to keep. These are non photosynthetic corals and require daily feedings. Your experience sounds like a classic case of them being starved to death slowly.

What sort of LEDs are these? 3W, any optics? Sounds like you have alot of light for your small tank. Not all zoas need strong light. Many of them prefer low-medium light.

If your temperature is at 30 degrees regularly, that could have contributed too. Corals typically do better below 29 degrees.

Don't assume that nitrate is low. Test for it. Same as iodine, calcium and strontium. Do not add if you don't test. Otherwise you might overdose, and it might be lethal. Since it is such a small tank, you have to know how much to add. Corals are sensitive to major fluctuations.

There is no such thing as wrong tester. Just buy all the kits if you want to. Otherwise, just get the basic ones first like Sherman mentioned.

Link to comment
Share on other sites

Hi,

anemone KIA -> Zoa KIA -> Turbo snail KIA.

SG=1.022

PH= 8.1

Temperature = avg 28-30

CA,KH,MG,NO3,PO4 = No test kit.

Would be grateful if someone can help test just once and teach me how to test (I read those instructions on box but didn't quite get it). Once found what's wrong, I'll go get the correct kit to maintain. Thanks in advance.

Link to comment
Share on other sites

  • SRC Member

what part of the instructions do you not understand? It's quite idiot proof. Add x ml to test tube, add x ml / x number of spatulas.

You can actually bring your water down to LFS and ask them to help u test. Of course only when you buy something from them la.

Do you have any other corals in the tank? There are many reasons for your corals/ls to die off. But like I mentioned before, if your temperature range continues to fluctuate within that range, you can be sure more corals will die.

Link to comment
Share on other sites

  • SRC Member
Hi,

anemone KIA -> Zoa KIA -> Turbo snail KIA.

SG=1.022

PH= 8.1

Temperature = avg 28-30

CA,KH,MG,NO3,PO4 = No test kit.

Would be grateful if someone can help test just once and teach me how to test (I read those instructions on box but didn't quite get it). Once found what's wrong, I'll go get the correct kit to maintain. Thanks in advance.

My suggestion is just go buy a test kit and test especially for PO4 and NO3. If you want something cheap, get the Sera test kits. I'm using the Sera NO3 test kit and it's as idiot proof as it can get. If you still can't understand the instructions, then maybe you can post your queries here and I'm sure someone will answer your queries.

Just to let you know, all the various test kits I've used so far, the instructions are really easy to understand.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

can't rem the brand that I was looking at for calcium tester when i was at AM - there were many different bottles to add just to test calcium reading.

I only left seafan. Hoping to use it as a indicator of success for whatever i'm trying. If also KIA & i havent find root cause, then will be really tough.

Btw, since my small tank, maybe also thinking fan will do. Fan should blow at water or out of water (ie. suck hot air out)?

Link to comment
Share on other sites

  • SRC Member

Anyway, looking at your set up and livestock below:

40G tank. No chiller (temp avg 28-30). 30 white LED, 30 blue LED, no T5. No skimmer but WC with NSW 20% every 2wks once. Turbo snail just KIA. Remaining 3 Damsels, 1 tang, 1 maroon clown, 1 cleaner shrimp.

I would say you are asking for trouble by running your system without a chiller and also without a skimmer. If your anamone died and rotted away in your tank, I'm very sure your nitrate level is already sky high.

WC with NSW 20% every 2 weeks is not considered a lot especially if you are going skimmerless. You should know that your tang is a poop machine. Without a skimmer and keeping a tang, you are really asking for trouble.

As I mentioned in my above post, get a test kit and test your water parameters. If your NO3 is sky high, then do a 20% WC daily until your NO3 reduces to a reasonable level.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      专业制作美国普渡大学西拉法叶校区大学毕业证》Q/微信751558146丨办理普渡大学西拉法叶校区毕业证成绩单,文凭留信网认证,保录取Purdue University,West Lafayette

    2. 0

      〖国外毕业证书〗加拿大MSVU圣文森山大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证Mount Saint Vincent University

    3. 0

      专业制作美国福特汉姆大学毕业证》Q/微信751558146丨办理福特汉姆大学毕业证成绩单,文凭留信网认证,保录取Fordham University

    4. 0

      〖国外毕业证书〗加拿大McGill麦吉尔大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证McGill University

    5. 0

      专业制作美国PITT毕业证》Q/微信751558146丨办理匹兹堡大学毕业证成绩单,文凭留信网认证,保录取University of Pittsburgh

×
×
  • Create New...