Jump to content

DIY:


sherman
 Share

Recommended Posts

Found this heat sink and this peltier in Sim Lim Square/Tower respectively

Mounted the peltier on the heat sink by 3M thermo tape

post-669-1255873385_thumb.jpg

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

Find a PC power supply to run the peltier.

First short the green and adjacent black wire in the big molex.

More detail in another DIY project.

post-669-1255873985_thumb.jpg

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

Nano chiller?

Yes.That is what I am DIYing.Hope it can work

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

Must read for nano keepers! Subscribed Sherman!

Thank You for your support,Bro comycus

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

  • SRC Member

I think your peltier element might be too small to cool your tank efficiently. I have seen people modifying the Dolphin 150W TEM cooler and they use two huge fans and two huge heat sinks and even then for a 2ft tank, they are only able to cool it down to ard 25-26degC.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
I wonder if you get an old minibar or small fridge and strip out the compressor and cooling coil, whether it will be a worthwhile DIY for nano.

I believe people have done that before but what they did was to get a mini bar with a freezer compartment and drilled two holes in the mini bar and then passed the water hose through the mini bar where the freezer compartment is.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Supporter
Found this heat sink and this peltier in Sim Lim Square/Tower respectively

Mounted the peltier on the heat sink by 3M thermo tape

Bro, will there any water contact with the heat sink? Care to explain how to remove the heat? Like Ice Probe, they have an Aluminum probe coated with some epoxy to be in the water to remove heat away. Is yours going to be similar principle?

Thanks... very curious to know.

Link to comment
Share on other sites

Bro, will there any water contact with the heat sink? Care to explain how to remove the heat? Like Ice Probe, they have an Aluminum probe coated with some epoxy to be in the water to remove heat away. Is yours going to be similar principle?

Thanks... very curious to know.

Still studying which method to use.

This is something very new to me

and not many good references to refer

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

  • SRC Supporter
Still studying which method to use.

This is something very new to me

and not many good references to refer

Looking forward to your solutions, cos I tried mine and not very successful. So I am also still searching for an answer... :)

Link to comment
Share on other sites

Hi, Sherman,

Wish to share my experience on this peltier cooler.

I got this picotank size (Reef) 15in x 8.5" in my office (Include refigium). My office aircond always turn off on Weekend.

Temperature measurement can go as high as 30 Deg.

Well i need to cool them down. The picture shown a peltier sandwich between 2 aluminium heatsink. + Fan (this fan also contribute to my water evaporation).

I understood that when times come, the heat sink could melt and cause the saltwater mix with this aluminium ion. Fortunately,

i had been running for 4~5 months now but i don't see any effect on my reef+Fish. Partially could be cause by changing water

weekly of 10~20%. Up to date no rush but green algae form at the aluminium plate.

Overall temperature in the worse case weekend can maintain around 27 Deg. I'm happy now.

But how big is your tank is the main concern. (Mine been light up by 5 T5 tube and Moonligh + Refigium Light + Return pump).

So, actually, it could help by bring down only 1~2 Deg but that is what i want.

Here is the picture.

Hope this help.

Thanks.,

miketeo

post-2427-1256115200_thumb.jpg

Link to comment
Share on other sites

  • SRC Member
I believe people have done that before but what they did was to get a mini bar with a freezer compartment and drilled two holes in the mini bar and then passed the water hose through the mini bar where the freezer compartment is.

found this blog using a water cooler ... http://benkrasnow.blogspot.com/2009/03/diy...um-chiller.html :rolleyes:

25 Gal Micro Ocean

Link to comment
Share on other sites

There are different methods to cool down the water.

Iceprobe use a ceramic probe to transfer the coolness to the tank water.

We can use the water block method.

Meaning we sit the water block on the peltier(s)

The peltier will cool the water block.

We run water into the water block and the water will be cool down.

But very hard to find water block on 2nd hand market.

And they do not sell alone in Singapore market.

Maybe there are bros here can help to machine a water block.

Any one can help?

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

Hi, Sherman,

Wish to share my experience on this peltier cooler.

I got this picotank size (Reef) 15in x 8.5" in my office (Include refigium). My office aircond always turn off on Weekend.

Temperature measurement can go as high as 30 Deg.

Well i need to cool them down. The picture shown a peltier sandwich between 2 aluminium heatsink. + Fan (this fan also contribute to my water evaporation).

I understood that when times come, the heat sink could melt and cause the saltwater mix with this aluminium ion. Fortunately,

i had been running for 4~5 months now but i don't see any effect on my reef+Fish. Partially could be cause by changing water

weekly of 10~20%. Up to date no rush but green algae form at the aluminium plate.

Overall temperature in the worse case weekend can maintain around 27 Deg. I'm happy now.

But how big is your tank is the main concern. (Mine been light up by 5 T5 tube and Moonligh + Refigium Light + Return pump).

Hi, your pic quite dark. How u attach? Device just touch the middle glass partition? No need touch water? Kindly pls elaborate. I got a 40g tank. Wanna do something similar. Where u buy Device from?

So, actually, it could help by bring down only 1~2 Deg but that is what i want.

Here is the picture.

Hope this help.

Thanks.,

miketeo

Link to comment
Share on other sites

  • SRC Member

bro you know i'm quite clueless about these diy stuff. But was reading some sites on cooling pc and one of their methods of cooling was using a radiator - in fact, straight out from cars! Maybe we can find a sg equivalent here?

"The most popular heater cores for water cooling are those from the 1984 Chevrolet Chevette and 1977 Pontiac Bonneville, due to their perfect sizes for full tower cases. The Chevette core has the correct surface area for a single 120 mm fan, while the Bonneville core is large enough to accommodate two. These can be purchased at most auto repair stores for between $20 and $30."

http://www.tomshardware.com/reviews/diy-wa...101,1055-4.html

Again, I hope it helps, otherwise paiseh paiseh!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      加拿大保录取_SFU毕业证成绩单——Q微信751558146西蒙菲莎大学学位证_成绩单_办理SFU文凭学历认证Simon Fraser University

    2. 0

      美国学位证_Brandeis毕业证成绩单+Q微信751558146布兰迪斯大学学位证_成绩单_办理Brandeis文凭学历认证Brandeis University

    3. 0

      加拿大保录取_UBC毕业证成绩单——Q微信751558146英属哥伦比亚大学学位证_成绩单_办理UBC文凭学历认证University of British Columbia

    4. 0

      美国学位证_PSU毕业证成绩单+Q微信751558146宾州州立大学学位证_成绩单_办理PSU文凭学历认证Penn State University Park

×
×
  • Create New...