Jump to content

My 1.5 ft Reef log


jackywongto
 Share

Recommended Posts

  • SRC Member

Head to GO then RB.

maybe around 4 pm.

U going RB around 4pm? Buying fishies??? :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

2 or more??

the driver can control 2 wet units wirelessly?

If cannot, then the statement does not make sense liao.......

keep us posted with your findings bro!

No, its still one driver per pump. If i'm not wrong, the ES models comes with better drivers and you can auto tune the wave size and wave frequency. Not sure what that actually means.

But in order to utilise fully the EcoSmart Nutrient Transport Mode and the Tidal Swell Mode, I believe you need 2 units or more, both driver and pump. to work together. One as a master and one as slave.

Imagine having 2 MP10 on both side of your tank working together. Nice!

Link to comment
Share on other sites

Going GO to buy GEMS again.... eyebrow.gif

U going RB around 4pm? Buying fishies??? eyebrow.gif

just c, c look look....

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

No, its still one driver per pump. If i'm not wrong, the ES models comes with better drivers and you can auto tune the wave size and wave frequency. Not sure what that actually means.

But in order to utilise fully the EcoSmart Nutrient Transport Mode and the Tidal Swell Mode, I believe you need 2 units or more, both driver and pump. to work together. One as a master and one as slave.

Imagine having 2 MP10 on both side of your tank working together. Nice!

Arh gotcha.....

works well for long tanks i guess. one on each side.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

going to RB to get my live white sand actually smile.gif

need to prepare the bed for the leopard wrasse tongue.gif

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member

going to RB to get my live white sand actually smile.gif

need to prepare the bed for the leopard wrasse tongue.gif

Then u going AMK for your candlelight dinner with DESI???

Wat u going to get at GO? RB Hawaiian shipment coming in today...sure got some fishes u will like very much. :eyebrow:

Tonight ard midnight their Fiji SPS, LPS and Zoa shipment coming. Ard 100+ SPS, 100+ Zoas and some LPS coming in this shipment.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

Update on PH:

My PH in the morning has shot up from 7.85 to 8.2

I am contributing this to the effective skimming of the MCE 600.

==> lesser waste in the water ==> higher retard of lowering the PH.

==> more bubbles ==> lesser CO2 ==> higher PH

Anyone has any more views as to why the high increase in PH over 1 week?

The problem now is that my PH can rise to as high as 8.6 in the evening. :(

I had to switch off the lights early and switch off the skimmer to prevent that from happening.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member

Update on PH:

My PH in the morning has shot up from 7.85 to 8.2

I am contributing this to the effective skimming of the MCE 600.

==> lesser waste in the water ==> higher retard of lowering the PH.

==> more bubbles ==> lesser CO2 ==> higher PH

Anyone has any more views as to why the high increase in PH over 1 week?

The problem now is that my PH can rise to as high as 8.6 in the evening. :(

I had to switch off the lights early and switch off the skimmer to prevent that from happening.

My PH is always stable at 8.3 so not sure why your PH would increase from 7.85 to 8.2 within a week. Could be better aeration of water by the MCE600 though.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

ya thats what I thought so too.....

My previous trend was always a gradual decrease so that is normal being the increase in waste built up over time......

I cannot think of any other reasons leh.....

Going to use salt mix water (with bottled distilled water of PH7.0) for WC to lower the overall PH.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

lol I was too bored during lunch, decided to drop by RB to ask them about some stuff. heh blushing.gif don't think will join u later le Jacky...

Anyway, there are a few jewels there! v. long never go down to LFS on shipment day le...

np. lucky for you too cause I may not be able to stop work early today.

did u change yr salt mix recently?...some salt mix has high pH levels after mixing...one of them is oceanic or yr mg level is high?....

no leh. inface nvr change for 2 weeks liao (eversince getting the mce) and I have been topping with bottled distilled water.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

dang... should have asked comy to get the live sand for me :P

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

online2long.gifonline2long.gifonline2long.gif

lol if it's urgent I can go back n collet it for u later.

no lah its ok bro.....

i will go down prob early next week then.

thanks for the kind offer..

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

wah bro...so free today ah?!..haha...got any anthias there?...i heard tomorrow coming fiji zoas...

seriously RD should just be a sponsor here as well.... no need to go here go there...$#%@%#&^&%*(%$#

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      专业制作美国普渡大学西拉法叶校区大学毕业证》Q/微信751558146丨办理普渡大学西拉法叶校区毕业证成绩单,文凭留信网认证,保录取Purdue University,West Lafayette

    2. 0

      〖国外毕业证书〗加拿大MSVU圣文森山大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证Mount Saint Vincent University

    3. 0

      专业制作美国福特汉姆大学毕业证》Q/微信751558146丨办理福特汉姆大学毕业证成绩单,文凭留信网认证,保录取Fordham University

    4. 0

      〖国外毕业证书〗加拿大McGill麦吉尔大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证McGill University

    5. 0

      专业制作美国PITT毕业证》Q/微信751558146丨办理匹兹堡大学毕业证成绩单,文凭留信网认证,保录取University of Pittsburgh

×
×
  • Create New...