Jump to content

My 1.5 ft Reef log


jackywongto
 Share

Recommended Posts

  • SRC Member
Hey Jacky,

Haha yeah, been travelling some. How's everyone ? And since my last update (before CNY?) of near crash, just kept my stock to recover. Few added, very basic set-up. I'll be updating my thread soon. But not much changes yet compared to you guys !

Soooooo you're upgrading huh ... wow. When's the plan ? :eyebrow:

I have every confidence that very soon you will have many new additions to your tank... :upsidedown:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
I have every confidence that very soon you will have many new additions to your tank... :upsidedown:

hmm ... being "controlled now"... says add VEEEERRRYYYY slowly ....... :cry:

it's ok, i'll just keep the tank running and maturing well first ...

25 Gal Micro Ocean

Link to comment
Share on other sites

  • SRC Member
hmm ... being "controlled now"... says add VEEEERRRYYYY slowly ....... :cry:

it's ok, i'll just keep the tank running and maturing well first ...

Can you be controlled??? :eyebrow::whistle

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

Received my reef nutrition tigger pods, phytofeast, oysterfeast, rotifeast tonight. Another great service by Janet - AM. Very keen to try them out asap but 1st let the war against nudi begins! Gonna nuke them with coralRX tonite.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

I was there just now at abt 8.30pm. are u there too?

Oh nope. I asked a friend to collect on my behalf earlier in the evening :)

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
Received my reef nutrition tigger pods, phytofeast, oysterfeast, rotifeast tonight. Another great service by Janet - AM. Very keen to try them out asap but 1st let the war against nudi begins! Gonna nuke them with coralRX tonite.

Show pics of all the nudis that crawled out of your zoas... :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

Show pics of all the nudis that crawled out of your zoas... :eyebrow:

I am expecting dozens. My is infested due to my procastination :(

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
I am expecting dozens. My is infested due to my procastination :(

U want to try the Industrial version next time??? :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
I am expecting dozens. My is infested due to my procastination :(

need to wait more then 10 mins.. cos after only 10 mins. few started struggling and coming / going back into the zoas..

so i make sure i dipped longer so as everything inside will up lorry.

then i shake and wash with salt water, put in.

all the zoas have no side effect (from what i observe)..

somemore, the pic i took, is only a few, got bristle worm (small and tiny) and many other small critters didnt have chance to scoop it up)

Link to comment
Share on other sites

  • SRC Member
need to wait more then 10 mins.. cos after only 10 mins. few started struggling and coming / going back into the zoas..

so i make sure i dipped longer so as everything inside will up lorry.

then i shake and wash with salt water, put in.

all the zoas have no side effect (from what i observe)..

somemore, the pic i took, is only a few, got bristle worm (small and tiny) and many other small critters didnt have chance to scoop it up)

Yes you are correct. No effect on zoas or other corals as iodine is not present.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

need to wait more then 10 mins.. cos after only 10 mins. few started struggling and coming / going back into the zoas..

so i make sure i dipped longer so as everything inside will up lorry.

then i shake and wash with salt water, put in.

all the zoas have no side effect (from what i observe)..

somemore, the pic i took, is only a few, got bristle worm (small and tiny) and many other small critters didnt have chance to scoop it up)

damn now then I see this post. I dip mine for about 10 mins only. So much bugs really. I ended up using chopsticks to shake the corals cause too disgusting

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
damn now then I see this post. I dip mine for about 10 mins only. So much bugs really. I ended up using chopsticks to shake the corals cause too disgusting

yup it's freaking alot of bugs man, you wont believe it till you use this HAHAHAHA... i think i dipped today 20 minutes.. all the critters float out dead..

been using a long chopstick and disposable spoon and keep circulating the water.. making wavelike..

got take a pic of the victory war you had?

Link to comment
Share on other sites

I did take some but a bit blurry... Too many work to be done so just took minimum

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

Ok update. I have torn down my whole tank. Gave it a good scrub and will polish the acrylic thoroughly tml. Back to square one.

Qn: how long can the corals stay in a togoyo box?

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
Ok update. I have torn down my whole tank. Gave it a good scrub and will polish the acrylic thoroughly tml. Back to square one.

Qn: how long can the corals stay in a togoyo box?

As long as you can keep the temp below 30 degC should not be an issue, I think... :upsidedown:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

As long as you can keep the temp below 30 degC should not be an issue, I think... :upsidedown:

within 30 deg shld be ok. Using vortech, large surface area and standing fan blowing at it.

Next question: how long does it take for nudi eggs to hatch and from which day do the newly hatched nudis start to lay eggs?

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
I am expecting dozens. My is infested due to my procastination :(

hope you get em all out ... i was able to extract 11 very small nudis looking like lettuce, and some flatworms ... some other critters also. that Rx Pro's really effective.

25 Gal Micro Ocean

Link to comment
Share on other sites

  • SRC Member
damn now then I see this post. I dip mine for about 10 mins only. So much bugs really. I ended up using chopsticks to shake the corals cause too disgusting

yup, after soaking for 10 mins, grab the base and shake it some while still submerged. yo'd see all them critters falling out.

25 Gal Micro Ocean

Link to comment
Share on other sites

  • SRC Member
within 30 deg shld be ok. Using vortech, large surface area and standing fan blowing at it.

Next question: how long does it take for nudi eggs to hatch and from which day do the newly hatched nudis start to lay eggs?

they can lay these egg ribbons as much as every 1-2 days, so depending on how the tank conditions and "well fed" they are, within a month or so can reach to even a hundred. hatching is within 2 weeks ... that would really be a breakout !

25 Gal Micro Ocean

Link to comment
Share on other sites

hope you get em all out ... i was able to extract 11 very small nudis looking like lettuce, and some flatworms ... some other critters also. that Rx Pro's really effective.

yeah, hope so. Actually I cannot see the nudis. I can see other worms, large pods swimming out and struggling. Will do another round of dip later in the week before I return them into the tank.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
Ok update. I have torn down my whole tank. Gave it a good scrub and will polish the acrylic thoroughly tml. Back to square one.

Qn: how long can the corals stay in a togoyo box?

hmm ... i see another rescaping coming ... :eyebrow:

25 Gal Micro Ocean

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...