Jump to content

My 1.5 ft Reef log


jackywongto
 Share

Recommended Posts

  • SRC Member
Saw that you placed order with Peter on the other forum already.

but if you need some urgently , i can pass you some to tie you over 1st this friday.

hey bro, just noticed again your 2010 resolution ... so so far standing by it ? hehe. :rolleyes:

25 Gal Micro Ocean

Link to comment
Share on other sites

  • SRC Member
Saw that you placed order with Peter on the other forum already.

but if you need some urgently , i can pass you some to tie you over 1st this friday.

haha thanks jacky, ok. :)

God Blessed all who appreciate His wonderful and beautiful creations.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

my first reef aquarium 15jan2010

3x2x2ft EOS 10mm tank with sump//deltec sc2060 skimmer//arctica 1/10hp chiller

maxpect g2 170w led//vortech mp40w wavemaker//eheim 1262 universal pump

eheim compact+ 3000 chiller pump//caribsea ocean direct live sands 40lbs

and other misc...

Link to comment
Share on other sites

  • SRC Member
I think I also still got about 3/4 bottle if u need bro ...

thanks bro :) this friday jacky will pass me some already. u coming for the lunch gathering? :)

God Blessed all who appreciate His wonderful and beautiful creations.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

my first reef aquarium 15jan2010

3x2x2ft EOS 10mm tank with sump//deltec sc2060 skimmer//arctica 1/10hp chiller

maxpect g2 170w led//vortech mp40w wavemaker//eheim 1262 universal pump

eheim compact+ 3000 chiller pump//caribsea ocean direct live sands 40lbs

and other misc...

Link to comment
Share on other sites

  • SRC Member
Impt update for those using prodibio pdts:

Pls do not assume that the vial will always make a clean break.

I step onto remnants of the broken vial today.

I think i did not make a clean break and a piece of glass shattered out.

thank goodness my girls did not step on it.

So please take special precaution.

honestly, i don't know why they have such design...

Link to comment
Share on other sites

but would really be nice ... well i guess that's the concept for japanese, minimal and simple. maybe can still put up a pico tank ... hmm ... think think think .... :eyebrow:

if I have a pico, I will use D&D epoxy.

model a tree, then frag out star polyps or skin polyps and paste them on the tree branches.... will be nice with small fishes swimming round it :)

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

hey bro, just noticed again your 2010 resolution ... so so far standing by it ? hehe. :rolleyes:

yup. well except for the detritus in the bare bottom. looks ugly. I think I will put a thin layer of grade 1 live sand.

But other than that, the water is very clear, glass free of algae.

I am amazed at the water clarity after my latest restart.

I guess the key to it is really frequent water changes (2x a week if possible).

I am even floating henry's food & tons of liquid food for my corals.

I have done away with phosphate removers and added more carbon instead.

Think if I am using clean water source, I should not need phospate removers.

I need to DIY a bracket to hold the customized filter sock and that should make my tank look even cleaner.

a lot of work yet to be done.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

thanks bro :) this friday jacky will pass me some already. u coming for the lunch gathering? :)

Justin, so fish food, coralrx sample, filter socks, monti frag.

let me know if I miss out anything.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
Oniz is a CoralRX fervent believer now :)

Well, it is a good product... :eyebrow:

I'm using it to dip my injured corals also and they do very well after dipping.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
Justin, so fish food, coralrx sample, filter socks, monti frag.

let me know if I miss out anything.

Wow...so much stuff for Justin... :whistle

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
yup. well except for the detritus in the bare bottom. looks ugly. I think I will put a thin layer of grade 1 live sand.

But other than that, the water is very clear, glass free of algae.

I am amazed at the water clarity after my latest restart.

I guess the key to it is really frequent water changes (2x a week if possible).

I am even floating henry's food & tons of liquid food for my corals.

I have done away with phosphate removers and added more carbon instead.

Think if I am using clean water source, I should not need phospate removers.

I need to DIY a bracket to hold the customized filter sock and that should make my tank look even cleaner.

a lot of work yet to be done.

Looking forward to seeing your customized bracket and filter sock... :upsidedown:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

honestly, i don't know why they have such design...

I think they need to vaccum sealed it for the bacteria survival.

and having individual vials is better than one large bottle cause that will expose the remaining solution to air.

A lot of medication uses these sort of vials too to avoid contamination.

good concept, I like it but just have to be careful.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
if I have a pico, I will use D&D epoxy.

model a tree, then frag out star polyps or skin polyps and paste them on the tree branches.... will be nice with small fishes swimming round it :)

yup yup ... i have a pico frag tank bro and a PAR LED :eyebrow: ... put some GSP as grass, then put some small zoa frag as flowers, then maybe some small suns on the branches ... think think think ...

25 Gal Micro Ocean

Link to comment
Share on other sites

Well, it is a good product... :eyebrow:

I'm using it to dip my injured corals also and they do very well after dipping.

those who have not used it before, please trust me and get a bottle.

You will not regret it and no, I do not make commission from promoting this product. :P

I think I have given out like 20% of my bottle already ....keke.....

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
those who have not used it before, please trust me and get a bottle.

You will not regret it and no, I do not make commission from promoting this product. :P

I think I have given out like 20% of my bottle already ....keke.....

Wow...after giving 20% of your bottle, how much do you have left??? :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
thanks bro :) this friday jacky will pass me some already. u coming for the lunch gathering? :)

no probs bro. lunch gathering where ? got dutch customer this week, so i guess i can't ... <_<

25 Gal Micro Ocean

Link to comment
Share on other sites

Wow...so much stuff for Justin... :whistle

yah... I am his office boy... running errands for him..... lol

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
yup. well except for the detritus in the bare bottom. looks ugly. I think I will put a thin layer of grade 1 live sand.

But other than that, the water is very clear, glass free of algae.

I am amazed at the water clarity after my latest restart.

I guess the key to it is really frequent water changes (2x a week if possible).

I am even floating henry's food & tons of liquid food for my corals.

I have done away with phosphate removers and added more carbon instead.

Think if I am using clean water source, I should not need phospate removers.

I need to DIY a bracket to hold the customized filter sock and that should make my tank look even cleaner.

a lot of work yet to be done.

yeah the filter sock will sure help. if you can keep up with the 2x/wk then shoudl be ok. just not sure about not having phosphate removers though ... well you can still monitor closely if it's effective.

25 Gal Micro Ocean

Link to comment
Share on other sites

no probs bro. lunch gathering where ? got dutch customer this week, so i guess i can't ... <_<

meeting at cityhall 12:15 noon.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
those who have not used it before, please trust me and get a bottle.

You will not regret it and no, I do not make commission from promoting this product. :P

I think I have given out like 20% of my bottle already ....keke.....

+ 1000000

25 Gal Micro Ocean

Link to comment
Share on other sites

yeah the filter sock will sure help. if you can keep up with the 2x/wk then shoudl be ok. just not sure about not having phosphate removers though ... well you can still monitor closely if it's effective.

I am sewing the filter socks into probably 3 smaller pieces.

so should be able to maintain rather easily.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
I am sewing the filter socks into probably 3 smaller pieces.

so should be able to maintain rather easily.

Errr... 4x12 inch filter socks into 3 smaller pieces = 3 of 4x4 inch filter sock??? :upsidedown:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

Errr... 4x12 inch filter socks into 3 smaller pieces = 3 of 4x4 inch filter sock??? :upsidedown:

yes bro. but probably more longish like 1x10inch.

small tank with small return lah.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
yes bro. but probably more longish like 1x10inch.

small tank with small return lah.

So you are going to hang a 10 inch filter sock in your 18 inch height tank??? :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 1

      Decomm Clearing sale

    2. 1

      Decomm Clearing sale

    3. 3

      WTS Many Items! Lelong Sale

    4. 0

      SPS for sale

×
×
  • Create New...