jackywongto Posted March 16, 2010 Author Share Posted March 16, 2010 ....i can't keep up with his decisions.... What decisions??? If only I can make one..... Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
jackywongto Posted March 16, 2010 Author Share Posted March 16, 2010 creepy photos from yesterday activities.... End result of 1st pail. dipped rics, yumas, gsp, blastos, mushrooms, supersuns Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
jackywongto Posted March 16, 2010 Author Share Posted March 16, 2010 End result of 2nd session (Sorry no photo editing software on this lappy) Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
jackywongto Posted March 16, 2010 Author Share Posted March 16, 2010 worm Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
jackywongto Posted March 16, 2010 Author Share Posted March 16, 2010 part of this worm was in that pail too.... Is this bristleworm? Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
SRC Member TayHongSiang Posted March 16, 2010 SRC Member Share Posted March 16, 2010 part of this worm was in that pail too....Is this bristleworm? looks like bobbit worm... Quote Link to comment Share on other sites More sharing options...
jackywongto Posted March 16, 2010 Author Share Posted March 16, 2010 and there are alot of these pods..... not sure what they are....some are quite huge. Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
jackywongto Posted March 16, 2010 Author Share Posted March 16, 2010 worm what about this worm? It is firey red in colour. slimmer than bristle worm. I disposed of 2. quite bright red coloured. Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
SRC Member TayHongSiang Posted March 16, 2010 SRC Member Share Posted March 16, 2010 and there are alot of these pods..... not sure what they are....some are quite huge. Fuel can name each one for u...he's the expert... Quote Link to comment Share on other sites More sharing options...
jackywongto Posted March 16, 2010 Author Share Posted March 16, 2010 looks like bobbit worm... do they attacked clams? I saw this fella feasting on my clams when it died. Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
jackywongto Posted March 16, 2010 Author Share Posted March 16, 2010 and there are alot of these pods..... not sure what they are....some are quite huge. peter, u see those brown spots that are like a ball. i believe those are the nudis. Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
SRC Member teebs Posted March 16, 2010 SRC Member Share Posted March 16, 2010 peter, u see those brown spots that are like a ball. i believe those are the nudis. You're right...those could be nudis...saw a lot of these when I dipped my zoas previously. Quote My Setup: 3x2x2 tank with IOS Equipment List: Chiller: Artica 1/5HP Chiller Pump: Sicce 4000 Return Pump: OR3500 Skimmer: Deltec APF600 Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker Lights: DElighting 2x150W MH + 2x 39W T5 Atinic FR: Skimz FR Pump: Atman AT-104 Tubby ATO, Kalkweisser Reactor with magnetic stirrer. Link to comment Share on other sites More sharing options...
SRC Member TayHongSiang Posted March 16, 2010 SRC Member Share Posted March 16, 2010 do they attacked clams?I saw this fella feasting on my clams when it died. bobbit worms usually eat fishes....unless its one of those clam eating worms... Quote Link to comment Share on other sites More sharing options...
jackywongto Posted March 16, 2010 Author Share Posted March 16, 2010 photo of my zoas before the dip. this was from GO and about 1 week after I bought it, this condition was so bad that only 40% of the polyps opened. in between the 4 closed polyps at about the center, you will see a hairy spot. that is the nudi. After the dip, its condition today despite being in a tub and non fed. Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
SRC Member TayHongSiang Posted March 16, 2010 SRC Member Share Posted March 16, 2010 photo of my zoas before the dip.this was from GO and about 1 week after I bought it, this condition was so bad that only 40% of the polyps opened. in between the 4 closed polyps at about the center, you will see a hairy spot. that is the nudi. After the dip, its condition today despite being in a tub and non fed. WOW!....sweet!...so when GOing GO again? Quote Link to comment Share on other sites More sharing options...
SRC Member albinosage Posted March 16, 2010 SRC Member Share Posted March 16, 2010 Wow it's like a miracle drug. And yup, the colony we got has lots of nudi and eggs. I dipped it in flatworm exit before introducing into my tank, about 8 to 10 nudis fell out, with a couple of baby bristle worms. It's been opening fully since day 1. Quote My 1.5ft nano cube My 24G nano tank (Decommed) I can picture in my mind a world without war, a world without hate. And I can picture us attacking that world, because they'd never expect it. -- Jack Handey Link to comment Share on other sites More sharing options...
SRC Member onizukaa Posted March 16, 2010 SRC Member Share Posted March 16, 2010 photo of my zoas before the dip.this was from GO and about 1 week after I bought it, this condition was so bad that only 40% of the polyps opened. in between the 4 closed polyps at about the center, you will see a hairy spot. that is the nudi. After the dip, its condition today despite being in a tub and non fed. mine opened though i nv dipped.. maybe cos your tank nudi tank.. thats why causing it. i FW dipped mine only. to coral rx Quote Link to comment Share on other sites More sharing options...
jackywongto Posted March 16, 2010 Author Share Posted March 16, 2010 WOW!....sweet!...so when GOing GO again? when next shipment comes lor... most likely 2 or 3rd day. will just buy and share one or two only IF there are nice ones. but I can go down and see look see look drink kopi with you guys if theres opportunity. Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
jackywongto Posted March 16, 2010 Author Share Posted March 16, 2010 mine opened though i nv dipped.. maybe cos your tank nudi tank.. thats why causing it. i FW dipped mine only. to coral rx It was fully opened from day 1 to 3 then slowly........ zzzzzzz........ yah maybe my tank was infested already but I did not notice it. But I discover nudis only after the getting this particular frag. Nudis quite easily seen one,.... especially if you switch on only actinics. some of them glow in flourescene green. cannot be missed. Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
jackywongto Posted March 16, 2010 Author Share Posted March 16, 2010 healthy zoas Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
jackywongto Posted March 16, 2010 Author Share Posted March 16, 2010 more opened zoas Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
jackywongto Posted March 16, 2010 Author Share Posted March 16, 2010 My corals warehouse. Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
SRC Member TayHongSiang Posted March 16, 2010 SRC Member Share Posted March 16, 2010 My corals warehouse. are they for sale? Quote Link to comment Share on other sites More sharing options...
jackywongto Posted March 16, 2010 Author Share Posted March 16, 2010 are they for sale? yah. whole tub 2k .... keke...u might have missed that post. Quote Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System 2011 resolution : Do it simpler, better and in an easier way! Link to comment Share on other sites More sharing options...
SRC Member TayHongSiang Posted March 16, 2010 SRC Member Share Posted March 16, 2010 yah. whole tub 2k .... keke...u might have missed that post. cannot buy individually ah?.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.