Jump to content

My 1.5 ft Reef log


jackywongto
 Share

Recommended Posts

  • SRC Member
personal thoughts : firstly my tank is a small tank. Will not have that many corals to dip once 2 rounds of dips are done. I am estimating I would still have about 80% of the volume left. Can last a long time if I use only 10 drops per drip for 1.2 liters of water. Probably can drip another 60 times! I really dun see a need for industrial or a larger bottle. These solution have expiry date too. Also u do not need an axe of kill an ant.

Secondly, i also feel a bit bad about the prodibio bulk order case. If can support local lfs, then support lor. Everyone needs to make a living and It is especially tough for those lfs that sells locally only. Our market is so small there arondo many competitiors.

I actually drip 30 drops into abt half a pail of NSW and dip my corals in for ard 15-20 mins at a time. Have to do quite a number of times though so by the time I dip all my corals and LRs in my sump into the dip, I should have finished my entire bottle.

I agree with supporting local LFSes which is why I spend so much on corals at GO, Reborn and Iwarna. :whistle

So I guess you will be getting your future prodibio products from ML??? :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
no lah. I still have 10 vials of digest. Just tcss lah. Let's shoot for thursday? I am heading to cf tml

Ok no problem. :upsidedown:

Will have to confirm again. Need to check when the filter socks are going to be delivered. No status update on vPost for my last few shipments.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

I actually drip 30 drops into abt half a pail of NSW and dip my corals in for ard 15-20 mins at a time. Have to do quite a number of times though so by the time I dip all my corals and LRs in my sump into the dip, I should have finished my entire bottle.

I agree with supporting local LFSes which is why I spend so much on corals at GO, Reborn and Iwarna. :whistle

So I guess you will be getting your future prodibio products from ML??? :eyebrow:

You know my Tunze pail right? I measured 3.8 litres and it fill up only about 1/4 of the pail. so if you pail is similar size, you might need to drop 60 drops.

ya try to support local lor.....

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
lau sai sia.. so expensive LOL..

why not we share share.. :) 3oz each the other person 2 0z, can split it less then $100 for a super powerful one. i think it's super worth it

Wah.. U think expensive?

MAP for Coral RX Pro 1 oz - USD 23.39 (SGD 33.00)

MAP for Coral RX Pro 4 oz - USD 71.99 (SGD 101.00)

MAP = Minimum advertised price which means all authorized distributors are allowed to sell at this minimum price.

Coral RX Industrial is probable not too suitable for hobbist use since it is actually meant for large coral farms or LFSes to use. :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

update: Just went to look at my tub tub just now.

Lights are on, fan is blowing at it directly.

Temperature should be about 28 deg cel. feels cold.

The zoas that are opened looks very healthy.

opened much more and larger than before.

Then there are some that are not opened. maybe overly stressed.

hope they get well soon.

Will take some pics later.

My new tank will take about 1 month to arrive.

If there are any takers for all my corals at $2k (my cost), please let me know.

i am not sure how long i can keep them alive in this tub hence thinking of selling them away....

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
You know my Tunze pail right? I measured 3.8 litres and it fill up only about 1/4 of the pail. so if you pail is similar size, you might need to drop 60 drops.

ya try to support local lor.....

Actually for me, quite jia lat because I can only dip ard 4-5 corals each time and for LR, ard 2-3 each time so have to use many pails of dip... :upsidedown:

I'll probably use finish my existing bottle by end this week or next week latest.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
update: Just went to look at my tub tub just now.

Lights are on, fan is blowing at it directly.

Temperature should be about 28 deg cel. feels cold.

The zoas that are opened looks very healthy.

opened much more and larger than before.

Then there are some that are not opened. maybe overly stressed.

hope they get well soon.

Will take some pics later.

My new tank will take about 1 month to arrive.

If there are any takers for all my corals at $2k (my cost), please let me know.

i am not sure how long i can keep them alive in this tub hence thinking of selling them away....

Cannot take all lah. But probably can take some of your zoas... :eyebrow:

But what you said about zoas opening larger after the dip is really true. some of the polyps that didn't open have finally opened...

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
My new tank will take about 1 month to arrive.

If there are any takers for all my corals at $2k (my cost), please let me know.

i am not sure how long i can keep them alive in this tub hence thinking of selling them away....

Wow..new tank...how many gallons...nvr update?

l7304smr.jpg
Link to comment
Share on other sites

  • SRC Member
Wow..new tank...how many gallons...nvr update?

I think it should be the same size as bino's new tank??? :eyebrow:

Unless he's getting his 9 footer... :upsidedown:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

Actually for me, quite jia lat because I can only dip ard 4-5 corals each time and for LR, ard 2-3 each time so have to use many pails of dip... :upsidedown:

I'll probably use finish my existing bottle by end this week or next week latest.

only 4 -5 ?

i finished dipping all mine in 2 batches... hehe.... just dumped them all in , switch on MP 10 and wait...

think you can dip more....

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
only 4 -5 ?

i finished dipping all mine in 2 batches... hehe.... just dumped them all in , switch on MP 10 and wait...

think you can dip more....

I try not to dip too many each time. Want it to have maximum effectiveness so end up dipping a lot more... :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

Cannot take all lah. But probably can take some of your zoas... :eyebrow:

But what you said about zoas opening larger after the dip is really true. some of the polyps that didn't open have finally opened...

can... take some zoas also $2k... lol

No lah... if I sell, will be sell all.

If not, then I try to keep them alive.

worst case they die, then write off 2k :(

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
I think it should be the same size as bino's new tank??? :eyebrow:

Unless he's getting his 9 footer... :upsidedown:

ic...last time i heard was, he was planning a have big tank then say, not enough space, then decide to keep his nano...then put up for sale....then decide to restart his nano....then now, ordered a new tank and wants to sell everything...quite confusing...

l7304smr.jpg
Link to comment
Share on other sites

I think it should be the same size as bino's new tank??? :eyebrow:

Unless he's getting his 9 footer... :upsidedown:

Still 1.5 ft..... but a new tank with sump.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

ic...last time i heard was, he was planning a have big tank then say, not enough space, then decide to keep his nano...then put up for sale....then decide to restart his nano....then now, ordered a new tank and wants to sell everything...quite confusing...

Yah I also confused..... damn jialat.....

lagi more confused when I had to sleep at 5 am this morning and wake up at 7am!

damn stone now....

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
Still 1.5 ft..... but a new tank with sump.

Huh??? 1.5ft tank with 0.5ft sump??? :eyebrow::whistle

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

Huh??? 1.5ft tank with 0.5ft sump??? :eyebrow::whistle

who knows. maybe after tomorrow, after setting up my current, I might make do with whatever i have......

feel so much like a woman..... fickle minded.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
Yah I also confused..... damn jialat.....

lagi more confused when I had to sleep at 5 am this morning and wake up at 7am!

damn stone now....

but 1.5ft how to keep fishes for your gal to c...haha....the most can let u keep 4-5 fishes nia...or one blue devil...

l7304smr.jpg
Link to comment
Share on other sites

  • SRC Member
who knows. maybe after tomorrow, after setting up my current, I might make do with whatever i have......

feel so much like a woman..... fickle minded.

since u r fickle minded...u need someone to accompany u to atlantic glass maker to help u make a decision once and for all...haha............................just kidding......

l7304smr.jpg
Link to comment
Share on other sites

  • SRC Member
who knows. maybe after tomorrow, after setting up my current, I might make do with whatever i have......

feel so much like a woman..... fickle minded.

Ok...so have u ordered your new tank already??? Or u haven't ordered your new tank yet??? :eyeblur:

Luckily u put fickle minded after saying u feel so much like a woman... :D

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

but 1.5ft how to keep fishes for your gal to c...haha....the most can let u keep 4-5 fishes nia...or one blue devil...

Those that I cannot keep just lie to her that those fishes will bite daddy's hand wan....

do you want daddy to be in pain???

kekeke

try to get those she likes and can keep one lor....

neon goby

RG

true perc

bi colour blenny

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

Luckily u put fickle minded after saying u feel so much like a woman... :D

lol

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
lol

Otherwise Ah Siang would probably have something to say... :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0
    2. 0

      WTS little red Ferrari Acro

    3. 2

      WTS/T Radioactive BN

    4. 0

      WTS Tanks, Equipment

×
×
  • Create New...