Jump to content

My 1.5 ft Reef log


jackywongto
 Share

Recommended Posts

  • SRC Member
nope.

but the lemon one looks much better.

The other one looks like pimples... gonna burst anytime spurting out the "juice"

Ya, but this is something different... :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
okie. tank still not cleared.

Gonna head to bed and see how its like tomorrow.

Nite guys!

Won't clear so soon I guess...Mine only cleared 4 hours after I dosed... :whistle

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
well, took the plunge and dosed biodigest, tim and reef booster.

Reefbooster is quite oil based. Now tank is rather murky.

I spilled 75% of my Digest. So dosed the remainly 25% into my tank.

50% of Biotim and about 35% of reefbooster.

Remaining amount is chilled in my fridge.

Rics curled up. They have balled up even more as I post. They are pretending to be monti now lol.

super sun tentacles stunted by polyp still extended.

yumas seemed to have enlarged.

cloves looked strange. mouth opened but arms seemed too heavy.

Gonio has nice extensions. about 2 inch.

FTS:

very nice yuma despite the murky water....i think they do better under MH / LED than T5, somehow.

l7304smr.jpg
Link to comment
Share on other sites

  • SRC Member
very nice yuma despite the murky water....i think they do better under MH / LED than T5, somehow.

Yumas will do better in low light & low flow conditions... :whistle

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

very nice yuma despite the murky water....i think they do better under MH / LED than T5, somehow.

Ya think I will go for these "bubbly"ones instead of those "flatter" species.

GO has posted this yuma pic on their incoming shipment. :eyebrow:

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

Update:

Switch on my skimmer today and it went bongus.

skimming out a lot of water.

I think because of the oil content (much like the DD epoxy), it is not skimming properly.

hope it resumes proper operation after 2 days.

Else I would need to strip and clean the 9002 again this week :(

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
Ya think I will go for these "bubbly"ones instead of those "flatter" species.

GO has posted this yuma pic on their incoming shipment. :eyebrow:

probably going for $100+ again... :eyebrow: Should have sold u at a higher price that time... :pirate:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
Update:

Switch on my skimmer today and it went bongus.

skimming out a lot of water.

I think because of the oil content (much like the DD epoxy), it is not skimming properly.

hope it resumes proper operation after 2 days.

Else I would need to strip and clean the 9002 again this week :(

You may need to retune and clean your skimmer like wat I did after I added in reef booster... :whistle

Just tested my nitrates (<10ppm) and phosphate (0.3ppm). Damm must find a way to reduce my phosphates fast... :upsidedown:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

probably going for $100+ again... :eyebrow: Should have sold u at a higher price that time... :pirate:

wah .... dun like that bro. Money is not everything lah.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
wah .... dun like that bro. Money is not everything lah.

My that Yuma is now super duper big...cover the whole rock it is on. :whistle

é’±ä¸æ˜¯ä¸‡èƒ½çš„å¯æ˜¯æ²¡é’±æ˜¯ä¸‡ä¸‡ä¸èƒ½ :whistle

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

é’±ä¸æ˜¯ä¸‡èƒ½çš„å¯æ˜¯æ²¡é’±æ˜¯ä¸‡ä¸‡ä¸èƒ½ :whistle

没钱是万万ä¸èƒ½ buy corals ..... lol

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
没钱是万万ä¸èƒ½ buy corals ..... lol

Yeah, you are right... :whistle

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
Update:

Switch on my skimmer today and it went bongus.

skimming out a lot of water.

I think because of the oil content (much like the DD epoxy), it is not skimming properly.

hope it resumes proper operation after 2 days.

Else I would need to strip and clean the 9002 again this week :(

So did you strip and clean your 9002 again??? :eyebrow:

Any FTS??? :whistle

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

nope. did not strip the 9002. lazy.

let it skim out the oil and see if it will be better after 1 week.

But the reefbooster seems quite good.

My gonio, rics and yumas opened big big......

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
nope. did not strip the 9002. lazy.

let it skim out the oil and see if it will be better after 1 week.

But the reefbooster seems quite good.

My gonio, rics and yumas opened big big......

Yup, after using reef booster, everything opened big big...especially Yumas and Rics... :whistle

But do you find that the skim mate from your skimmer is really a lot more after using Bio Clean? Previously I was cleaning my collection cup every week, now I have to clean it every alternate day as it gets really really dirty.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

Yup, after using reef booster, everything opened big big...especially Yumas and Rics... :whistle

But do you find that the skim mate from your skimmer is really a lot more after using Bio Clean? Previously I was cleaning my collection cup every week, now I have to clean it every alternate day as it gets really really dirty.

Nope. it skimmed a lot of water though after I switch it on again.

for your skimmer, should be more watery skimmage.

That could be due to reefbooster and not bioclean

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

think i will set up my frag tank after the chinese new year.

my daughter also bugging me to get seahorse.

Issit possible to house seahorse in a frags tank.

gotta get rid of the hamsters 1st. :P

no space.

Also tanking of rescaping..... once I done up my frag tank and going to break up all the bigger corals into smaller frags.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
think i will set up my frag tank after the chinese new year.

my daughter also bugging me to get seahorse.

Issit possible to house seahorse in a frags tank.

gotta get rid of the hamsters 1st. :P

no space.

Also tanking of rescaping..... once I done up my frag tank and going to break up all the bigger corals into smaller frags.

whoa ... rescape again bro ? wait, hamsters are urs and not ur princess's ? hehe like i told peter before my princess also like a seahorse ...

25 Gal Micro Ocean

Link to comment
Share on other sites

whoa ... rescape again bro ? wait, hamsters are urs and not ur princess's ? hehe like i told peter before my princess also like a seahorse ...

my girl says she dun like hamsters now.... smelly .....

hmmm... dun wanna spoil her but i want to set up my frag tank.......

I dun like the scape now.... going for bonsai minimalist scape.

gotta come across some suitable rocks 1st.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
my girl says she dun like hamsters now.... smelly .....

hmmm... dun wanna spoil her but i want to set up my frag tank.......

I dun like the scape now.... going for bonsai minimalist scape.

gotta come across some suitable rocks 1st.

haha ok. yeah simple is always nice, can still look stunning. anyway just had a near crash :unsure: ... casualties casualties ... will be back in a few days, or worst, after CNY already.

25 Gal Micro Ocean

Link to comment
Share on other sites

  • SRC Member
my girl says she dun like hamsters now.... smelly .....

hmmm... dun wanna spoil her but i want to set up my frag tank.......

I dun like the scape now.... going for bonsai minimalist scape.

gotta come across some suitable rocks 1st.

Plenty of nice live rocks big, medium, small, at CF.

sixteen per kg though.

Should be very good for your new scaping.

(-_-) Happy will do ... (o_o)

Link to comment
Share on other sites

haha ok. yeah simple is always nice, can still look stunning. anyway just had a near crash :unsure: ... casualties casualties ... will be back in a few days, or worst, after CNY already.

again?

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
again?

yup ... the one before was after 3 week vacation, so somehow i think i know what happened. but for this one, not sure what happened, still investigating ... will update my thread soon.

25 Gal Micro Ocean

Link to comment
Share on other sites

  • SRC Member
Nope. it skimmed a lot of water though after I switch it on again.

for your skimmer, should be more watery skimmage.

That could be due to reefbooster and not bioclean

Yup, mine was watery for the first day. Second day onwards, back to normal and skimming smelly black stuff like crazy... :whistle

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
think i will set up my frag tank after the chinese new year.

my daughter also bugging me to get seahorse.

Issit possible to house seahorse in a frags tank.

gotta get rid of the hamsters 1st. :P

no space.

Also tanking of rescaping..... once I done up my frag tank and going to break up all the bigger corals into smaller frags.

Possible but must have low flow and also have anchoring points set up for the sea horses for their tails to wrap around to. Reborn still have quite a number of sea horses.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Carleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146¥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,Carleton University

    2. 0

      办理!!美国MU毕业证*成绩单@Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University

    3. 0

      办理!!美国BU毕业证*成绩单@Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor University

    4. 0

      UWO Diploma毕业证,西安大略大学毕业证——Q微信751558146¥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,University of Western Ontario

×
×
  • Create New...