Jump to content

My 1.5 ft Reef log


jackywongto
 Share

Recommended Posts

i mean share the blasto wif me :P

These fellas are so small. about 1 inch.

frag already it cannot stand on my sandbed.

Peter still has another piece for sale.

Negotiate with him on that one?

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

2ppm Phosphate is not "some" , i think it is quite a lot right?

**gulp....

Hmm,

kind of. Especially for a nano :X but well, like Peter said, grab some GFO and try to reduce that level (:

- dosing so much additives and then do water change that lower the readings.... it is like slapping your left cheek with your right hand.

- wanna reduce nitrate and phosphate, thats why changing water but end up with higher nitrate and phosphate. ... this one you slap your right cheek with left hand lol

All I know now is that I see two big red cheeks! :P *jokingly*

Anyway on a serious note, I think what you can do is to draw up a chart to predetermine your dosing and water change schedule. Run like a week or two weeks long of tests to see how much your inhabitants are consuming on the addictives, kH and calcium. Through these series of test, I hope you are able to see a pattern happening in your tank and from there, pinpoint specific date of the week for each specific task (:

you get my chain of thoughts here?

wonder what is the salt mix readings?

Anyway, presence of phosphates and nitrates are inevitable for new tanks or semi-old tanks. It takes a while for everything to run in and eventually hit a consensus note which minimal effort is required to keep everything going. So hang in there bro, continue doing what you have been doing so far. I do see some progress in your nano so don't let it down. A kite will only fly higher if you pursue in the course of the wind and determined not to let it dwindle. I am sure your nano will go as a kite, only up and not down with your current diligence in handling your husbandry (:

Happy Reefing,

Marc J.

Happy Reefing,

Marc J.

Link to comment
Share on other sites

Anyway on a serious note, I think what you can do is to draw up a chart to predetermine your dosing and water change schedule. Run like a week or two weeks long of tests to see how much your inhabitants are consuming on the addictives, kH and calcium. Through these series of test, I hope you are able to see a pattern happening in your tank and from there, pinpoint specific date of the week for each specific task (:

Happy Reefing,

Marc J.

Thanks for the encouragement Marcus. Yup surely will press on.

On the charting, I think that is a fantastic idea.

Was planning to draft a table and log the dosing routine and basic husbandry (changing of carbon, SORB 4)

But need to decide on the source of WC 1st and install my Eheim 2026 1st. Else it will be difficult to interpret the readings and changes with those variables.

Will try to do a WC with DI water this week and see whats the reading like.

Thanks for enlightening words of wisdom. Keep them coming :)

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • Senior Reefer
Took some photos under blue lighting.

Thanks for these Peter. They really look cute.

BTW, the 3rd bunch really did not make it :( RIP.

The surviving 7 polyps should do well.

these zoas look very familiar ;) O.O

Link to comment
Share on other sites

wha... thot from the same colony? how come jacky one nicer? i want discount!!

:upsidedown:

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

wow you guys have all been busy! hahaa Jacky your tank still got space for more gems for outing this sun?

This sunday basically to mingle around lah.

Don't think I am getting anything.

** I always say this but still end up buying something... haha.... better dun say so early.

plus your frags and Peacemaker's ones... I think will be quite full already.

still have a few rics and frag from fragmaster too.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
This sunday basically to mingle around lah.

Don't think I am getting anything.

** I always say this but still end up buying something... haha.... better dun say so early.

plus your frags and Peacemaker's ones... I think will be quite full already.

still have a few rics and frag from fragmaster too.

and from me too.. hahahhaa

A man with a reef tank is a man with an empty wallet...

Link to comment
Share on other sites

and from me too.. hahahhaa

still awake??

oh ya.. seems like gonna be pretty full.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
wha... thot from the same colony? how come jacky one nicer? i want discount!!

From same colony lah...Yours is no.1 his is no. 2 as posted in my sale thread... :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
wow you guys have all been busy! hahaa Jacky your tank still got space for more gems for outing this sun?

His tank still got a LOT of space for gems. Think he should go Reborn to get the Aussie rainbow scolys... :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
This sunday basically to mingle around lah.

Don't think I am getting anything.

** I always say this but still end up buying something... haha.... better dun say so early.

plus your frags and Peacemaker's ones... I think will be quite full already.

still have a few rics and frag from fragmaster too.

Ya, and you will be setting up your ric garden and yuma garden... :whistle

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

!!!!!! Woke up and found that my artica chiller indicated 24 deg cel!!!

My chiller is set at 27.5 deg cel.

Is the meter faulty or did the water turn that cold in the morning?

has anyone encountered this before?? :shock:

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

!!!!!! Woke up and found that my artica chiller indicated 24 deg cel!!!

My chiller is set at 27.5 deg cel.

Is the meter faulty or did the water turn that cold in the morning?

has anyone encountered this before?? :shock:

it has slowly climbed to 25.5 now.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
it has slowly climbed to 25.5 now.

The only time I encountered this was when my chiller pump stopped working... :upsidedown:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

you got external thermometer? does the tank water feel damn cold?

yeah it was very cold. colder than usual.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
yeah it was very cold. colder than usual.

Maybe something wrong with the chiller thermostat. :upsidedown:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

The one on the left is mine. yours on the right.

Somehow mine seems more fluffy. both at almost the same spot.

Zoas. you have this? I have a miserable 2 polyps frag (at the top) if you want it.

Your xenia. Splitting already. can pass the removable branch to you.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

piangz.. why do you always see ur LS poopoo???

after you post about your coco poop, i've been observing mine waiting to witness it too.. but nothing lehz..

try feeding plytoplankton. :)

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
The one on the left is mine. yours on the right.

Somehow mine seems more fluffy. both at almost the same spot.

Zoas. you have this? I have a miserable 2 polyps frag (at the top) if you want it.

Your xenia. Splitting already. can pass the removable branch to you.

wha... must get refund from Peter liao.. hahahha.. well the blues are out in this picture i must say.. cant wait to have it in my tank! =] more i see it the more i like it.. =P

in ur zoas pic there seem to be some pest majanos anemones.. they are PEST... :nuke: them!!!!

dun mind having a small frag of xenia... (now where can i place them??)

A man with a reef tank is a man with an empty wallet...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...