Jump to content

My 1.5 ft Reef log


jackywongto
 Share

Recommended Posts

  • SRC Member

This is the red mushie that I bought yesterday...

Mushie.jpg

The reddest and most lum mushie I saw there...tooo bad all the polyps are so small...

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member

These are two of my existing corals...7 head Duncan & Zoas...

Duncan.jpg

zoas.jpg

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

This is the red mushie that I bought yesterday...

Mushie.jpg

The reddest and most lum mushie I saw there...tooo bad all the polyps are so small...

where are the other corals u bought? pics pics

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

These are two of my existing corals...7 head Duncan & Zoas...

Mr Temptation at work againzzzzzz lol

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
wow! any aussie acans coming in? :eyebrow:

I think this is a Bali shipment. Reborn does not have many Aussie shipments... :P The last Aussie shipment they brought in was a special order from some reefers and they took ard 80% of the corals... :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
They will grow pui pui in no time! Low flow, moderate light, mine open up prob ard 4"!

When I saw it at GO, it was also this small size...so I believe it may be small polyps...Some other red mushies had big polyps but not lum red... :rolleyes:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
I think this is a Bali shipment. Reborn does not have many Aussie shipments... :P The last Aussie shipment they brought in was a special order from some reefers and they took ard 80% of the corals... :eyebrow:

ayez... i know, just hoping. :)

btw Peter you should just setup ure own thread la... haha so many nice corals

Link to comment
Share on other sites

  • SRC Member
Mr Temptation at work againzzzzzz lol

Come come...lets go buy more corals...ehhhh...u buy I look can liao...then I get frags from u... :idea:

So how...reborn today??? :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
ayez... i know, just hoping. :)

btw Peter you should just setup ure own thread la... haha so many nice corals

No lah...I juz want to tempt Jacky only...Then his tank can be REBORN... :eyebrow::whistle

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

Come come...lets go buy more corals...ehhhh...u buy I look can liao...then I get frags from u... :idea:

So how...reborn today??? :eyebrow:

Thought i said no already?? hehe

Gotta clear my work and pack up for my trip.

Hey guys, whats a good compact (P&S) camera to get?

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member

Canon IXUS 990IS... :P

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member

This is another coral I got from GO yesterday...

Coral1.jpg

Existing corals in my tank...

Coral2.jpg

Coral3.jpg

Coral4.jpg

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
haha.. you are a bad influence man! haha...

Where got bad influence? I'm a good influence on him... :eyebrow:

I help him make his tank become a gem tank... :P

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

Update Day 2:

The mushies have expanded a little more today, especially the red ones.

Hopefully by the time I come back next week, they would have boomed to 2x their size.

I also realized the macro algae has turned greener today. It was pale translucent yesterday.

(Sorry arh... so boring ... same few corals ... paiseh :P)

The PH has suddenly shot up to 8.26 the highest i have seem.

One of the reason could be due to the algae growth.

Just pondering if the addition of corals could have contributed to the increase in PH too?

I hate to get snails to tackle the algae growth. hopefully the bicolour blenny does some overtime work.

can any other fishes help besides tang?

The ocellaris is doing much better today. swimming normally. Hope he stays that way.

Gave me a fright the other day. Most of his fins has regenerated.

They call him the common clown but he will always be special in our family's heart :)

Thus far, what I can say is that i am very happy with the LED.

The colour seems very well balance and the light is very well distributed.

It is as bright as my 150W MH minus all the heat.

Last but not least, Vico, this FTS with your light is specially taken for you :)

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
Update Day 2:

The mushies have expanded a little more today, especially the red ones.

Hopefully by the time I come back next week, they would have boomed to 2x their size.

I also realized the macro algae has turned greener today. It was pale translucent yesterday.

(Sorry arh... so boring ... same few corals ... paiseh :P)

The PH has suddenly shot up to 8.26 the highest i have seem.

One of the reason could be due to the algae growth.

Just pondering if the addition of corals could have contributed to the increase in PH too?

I hate to get snails to tackle the algae growth. hopefully the bicolour blenny does some overtime work.

can any other fishes help besides tang?

The ocellaris is doing much better today. swimming normally. Hope he stays that way.

Gave me a fright the other day. Most of his fins has regenerated.

They call him the common clown but he will always be special in our family's heart :)

Thus far, what I can say is that i am very happy with the LED.

The colour seems very well balance and the light is very well distributed.

It is as bright as my 150W MH minus all the heat.

Last but not least, Vico, this FTS with your light is specially taken for you :)

Is this the LED from DE lightings? Very tempting to get one... :evil:

l7304smr.jpg
Link to comment
Share on other sites

  • SRC Member
Update Day 2:

The mushies have expanded a little more today, especially the red ones.

Hopefully by the time I come back next week, they would have boomed to 2x their size.

I also realized the macro algae has turned greener today. It was pale translucent yesterday.

(Sorry arh... so boring ... same few corals ... paiseh :P)

The PH has suddenly shot up to 8.26 the highest i have seem.

One of the reason could be due to the algae growth.

Just pondering if the addition of corals could have contributed to the increase in PH too?

I hate to get snails to tackle the algae growth. hopefully the bicolour blenny does some overtime work.

can any other fishes help besides tang?

The ocellaris is doing much better today. swimming normally. Hope he stays that way.

Gave me a fright the other day. Most of his fins has regenerated.

They call him the common clown but he will always be special in our family's heart :)

Thus far, what I can say is that i am very happy with the LED.

The colour seems very well balance and the light is very well distributed.

It is as bright as my 150W MH minus all the heat.

Last but not least, Vico, this FTS with your light is specially taken for you :)

wha... the purple fellow is damn nice!!!

A man with a reef tank is a man with an empty wallet...

Link to comment
Share on other sites

Is this the LED from DE lightings? Very tempting to get one... :evil:

Yup. Go get one... very nice :)

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

wha... the purple fellow is damn nice!!!

next week you can have it already. :)

pass you 2 polys, then you can let it grow in your tank.

I have 2 red ones for you too.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

Canon IXUS 990IS... :P

This is a good camera.

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

next week you can have it already. :)

pass you 2 polys, then you can let it grow in your tank.

I have 2 red ones for you too.

Can I have one poly of the purple one

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...