Jump to content

My 1.5 ft Reef log


jackywongto
 Share

Recommended Posts

  • SRC Member
Some stuff arrived this week.

Nope it is not my reefpack :(

What is that??? :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

What is that??? :eyebrow:

hehe just some maintenance stuff. send in such a huge box... no wonder shipping so ex.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

Mr Clean magic eraser. Heard that this is very good for Acrylic tanks.

Got 2 dozens of it. Will try the Daiso melamine sponge later when I run out of these.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

wow so much empty space!

next time can ask any bros here to share shipment save cost, save paper, save the trees :)

Silly Amazon lor.......

@$#$^#*&%$# should have packed a couple of Blu ray movies in it :)

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

Novus cleaner, polisher and scratch remover....

I think i have some scratches on the base of my tank now.

Need to try these out.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member

Now the only thing missing is your reefpack... ;)

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

Now the only thing missing is your reefpack... ;)

a bit paiseh... page 5 already and I still have an empty tank :paiseh:

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
a bit paiseh... page 5 already and I still have an empty tank :paiseh:

Good things take time... B)

So u going for a FOWLR or SPS/LPS? :D

I'm still waiting for my wife's approval to get a 3x2x2 tank... :P

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

Good things take time... B)

So u going for a FOWLR or SPS/LPS? :D

I'm still waiting for my wife's approval to get a 3x2x2 tank... :P

Definitely at least LPS.

If time is manageable, hope to move to SPS.

Thinking of just getting frags since mine is such a small tank.

Will be very rewarding to see frags fill up the tank.

Yup know how it goes. Gotta convince the wife.

I spend 4 years convincing her to have a small tank INSIDE the house.

My previous tank was sited at the balcony outdoor due to her concern with saltwater sprays.

hope your wish come true soon. SO yeah... as you said it - Good things take time :)

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member

hi , did not noticed you have a tank thread up , i'm sure the tank will hold up well , since my 4ft acrylic sump still holding up well for almost 1 yr already,

i also thinking of asking Henkabe to do a 4ft tank for me but not sure if they able to do up a strong 4x2.75x2 tank or not. but anyway it wont be this yr , maybe next yr. anyway if your rocks are not in yet , i would suggest that you spent a little more and get 1 big pc of nice LR to put in the tank , to avoid the issue of topping rocks as that would leave scars on your tank for sure

Mix Reef Tank: 5ft x 2.5ft x 2ft mixed reef

Chiller: daikin 1hp compressor

Return: Red Dragon 6.5m3

Lighting: Aqua Lumen Ocean 4ft

Skimmer: Reef Octopus RO-RPS-5000-EXT w/ Bubble Blaster

CR: RM 824 /milwakee PH controller

Tunze TS24 with 7096

Tunze Osmolator

American Pinpoint PH monitor

American Pinpoint ORP Monitor with Resun Ozone

RM sulphur denitrator

RM FR 424

RM FR 624

TLF Phosban Reactor

My old tank thread

469748_10150741487628605_529506809_o_zps36d5c396.jpg

Link to comment
Share on other sites

  • SRC Member
Definitely at least LPS.

If time is manageable, hope to move to SPS.

Thinking of just getting frags since mine is such a small tank.

Will be very rewarding to see frags fill up the tank.

Yup know how it goes. Gotta convince the wife.

I spend 4 years convincing her to have a small tank INSIDE the house.

My previous tank was sited at the balcony outdoor due to her concern with saltwater sprays.

hope your wish come true soon. SO yeah... as you said it - Good things take time :)

Too bad for me, my 5 rm flat does not have a balcony... :rolleyes:

Will try to get her to agree soon as I'm considering getting a decomm tank set from someone. :eyebrow:

She's still pretty annoyed about the salt water sprays from my nano tank... <_<

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

hi , did not noticed you have a tank thread up , i'm sure the tank will hold up well , since my 4ft acrylic sump still holding up well for almost 1 yr already,

i also thinking of asking Henkabe to do a 4ft tank for me but not sure if they able to do up a strong 4x2.75x2 tank or not. but anyway it wont be this yr , maybe next yr. anyway if your rocks are not in yet , i would suggest that you spent a little more and get 1 big pc of nice LR to put in the tank , to avoid the issue of topping rocks as that would leave scars on your tank for sure

Wah... 4 ft acrylic......

yeah was thinking about the rocks falling too.

Would like to have a lot of caves and crevices so that fishes can hide.

I do not think I can find a big rock with those.

Most likely will get several small pieces with nice arcs, glue them together and have 2-3 separate large rocks.

I will not glue all the rocks together incase if i need redo some aquascaping for corals additions.

But yup, thanks for the advise on rocks topping.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

Too bad for me, my 5 rm flat does not have a balcony... :rolleyes:

Will try to get her to agree soon as I'm considering getting a decomm tank set from someone. :eyebrow:

She's still pretty annoyed about the salt water sprays from my nano tank... <_<

yeah quite a few good items on Pasar malam.

act fast :)

or get RSM - enclosed tank type.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
Wah... 4 ft acrylic......

yeah was thinking about the rocks falling too.

Would like to have a lot of caves and crevices so that fishes can hide.

I do not think I can find a big rock with those.

Most likely will get several small pieces with nice arcs, glue them together and have 2-3 separate large rocks.

I will not glue all the rocks together incase if i need redo some aquascaping for corals additions.

But yup, thanks for the advise on rocks topping.

go cf or ml to take a look , they usually have very nice rocks,

but like i said , more ex lor

Mix Reef Tank: 5ft x 2.5ft x 2ft mixed reef

Chiller: daikin 1hp compressor

Return: Red Dragon 6.5m3

Lighting: Aqua Lumen Ocean 4ft

Skimmer: Reef Octopus RO-RPS-5000-EXT w/ Bubble Blaster

CR: RM 824 /milwakee PH controller

Tunze TS24 with 7096

Tunze Osmolator

American Pinpoint PH monitor

American Pinpoint ORP Monitor with Resun Ozone

RM sulphur denitrator

RM FR 424

RM FR 624

TLF Phosban Reactor

My old tank thread

469748_10150741487628605_529506809_o_zps36d5c396.jpg

Link to comment
Share on other sites

  • SRC Member

For me, I really like the idea of having 2-3 big rocks in a 1.5 cube. Easy to scape, solid and steady. Try to build the model before buying the rocks :)

I have seen a reefer here who had a sort of 2.5 cube with 3 big rocks. Loved the scape, lots or crevice, nooks for fishes to sleep in, n had nice slopes to put corals, and all rose up to form a plateau . Just more ideas for you to consider!

Link to comment
Share on other sites

Thanks dachkie and comycus.

will take note and try to get large rocks.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
yeah quite a few good items on Pasar malam.

act fast :)

or get RSM - enclosed tank type.

Should be getting a 3x2x2 if I do get one... :eyebrow:

So when is your reef pack coming?

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

Should be getting a 3x2x2 if I do get one... :eyebrow:

So when is your reef pack coming?

honestly I do not know. Suppose to ship to singapore this week.

So I am assuming next week.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

let me know how it does. maybe i will downsize too or something..

You are referring to the Reefpack W3ish?

I think AhSiang and Bino are using the Tunze 9002 skimmer already.

For my review you have to wait another 4 weeks at least hehe

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
Mr Clean magic eraser. Heard that this is very good for Acrylic tanks.

Got 2 dozens of it. Will try the Daiso melamine sponge later when I run out of these.

Mr Clean looks like a fag and never knew there were things like scratch removers lol!

Any special things in the interior of the cabinet?

Brown SPS > Kinder Surprise

White SPS = Kinder Surprise after expiry date

Assumption killed the dinosaurs, they didnt have test kits.

Link to comment
Share on other sites

  • SRC Member
You are referring to the Reefpack W3ish?

I think AhSiang and Bino are using the Tunze 9002 skimmer already.

For my review you have to wait another 4 weeks at least hehe

nah, im talking about the acrylic tank. would really love to work with tank with such nice clarity.

Member of

n34281892381_7606.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...