Jump to content

My 1.5 ft Reef log


jackywongto
 Share

Recommended Posts

  • SRC Member

wowowowow!!

i love the cabinet sleek and modern design, super nice cabinet!!!

Last but not least, the JBJ 24G Nano cabinet

Went hunting around for a low side table that can be used as a stand but unable to find one at a reasonable price.

The black background actually blend in well with the cabinet.

This is my probably my last update for the next 2 - 3 weeks.

Till my Tunze, MP10, and other stuff arrives.

Gotta wrap up the tank for the time being.

Any comments, suggestions , pls feel free to shoot them off here.

No offence will be taken :blush:

Link to comment
Share on other sites

bro can tell me how much for the tank?

its about $250 (you will have some small change) for the 8mm.

for the 6mm, its slightly less than $200.

I will be going back to them to fabricate my top cover one I have my lighting sorted out.

So i can refer you and Terryz if you guys are interested.

Just PM me and let me know.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

wowowowow!!

i love the cabinet sleek and modern design, super nice cabinet!!!

Hey Onizuka, its a standard JBJ cabinet lah... nothing special. I was hoping the base is a little smaller though.

And another disadvantage is that there is a small gap between the base and the floor.

This will trap dust. I am thinking of modifying it so that the base flushes on the floor.

BTW, the black sand quantity in 1 packet is rather little, make sure you have order enough for yourself.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

wow I love the modified cabinet too! Absolute stunner! 2 thumbs up for your project bro!

on the cautious side, the 4 cylindrical support thingy should be able to hold the weight of your tank right?

I did not mod anything lol.

It is a standard JBJ 24G nano tank.

So yeah, it should hold.

Plus mine is an acrylic tank so it is even lighter than the JBJ glass tank.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
I did not mod anything lol.

It is a standard JBJ 24G nano tank.

So yeah, it should hold.

Plus mine is an acrylic tank so it is even lighter than the JBJ glass tank.

:wacko: lol my bad... just looks way cooler than a normal jbj.

edit: what about the sump? or sumpless?

Link to comment
Share on other sites

:wacko: lol my bad... just looks way cooler than a normal jbj.

edit: what about the sump? or sumpless?

I used to have sumps in my previous tanks and I hate them - despite knowing their advantages.

They cost the hinges to rust, you will have lots of additional pumps and cables inside, messy messy messy.

So going for a clean cut look this time.

getting the Tunze Reefpack 200. Opting for minimum eqpt if possible.

So just a square open tank, chiller, lighting, Tunze reefpack, mp10.

http://www.aquamarin.com.sg/productsDetail.asp?productid=780

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
I used to have sumps in my previous tanks and I hate them - despite knowing their advantages.

They cost the hinges to rust, you will have lots of additional pumps and cables inside, messy messy messy.

So going for a clean cut look this time.

getting the Tunze Reefpack 200. Opting for minimum eqpt if possible.

So just a square open tank, chiller, lighting, Tunze reefpack, mp10.

http://www.aquamarin.com.sg/productsDetail.asp?productid=780

ahhh I know what you mean... since it's braceless, hoodless, might have some spray coming out, will have to adjust mp10 :) I'm sure u already know tt, I'm just nagging

Link to comment
Share on other sites

ahhh I know what you mean... since it's braceless, hoodless, might have some spray coming out, will have to adjust mp10 :) I'm sure u already know tt, I'm just nagging

But I am looking at a couple more things to add.

1) ATO... not sure how much evaporation there is.

The reefpack is very sensitive to water level.

2) American Pinpoint ORP monitor.

3) American Pinpoint PH monitor.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
But I am looking at a couple more things to add.

1) ATO... not sure how much evaporation there is.

The reefpack is very sensitive to water level.

2) American Pinpoint ORP monitor.

3) American Pinpoint PH monitor.

Because you won't have space to hide your ATO, I suggest looking at delighting's ato system. Tunze osmolator is good, as long as you don't mind abit more clutter.

I'm not familar with american pinpoint's orp n ph monitor, but I just leave my american pinpoint salinity monitor in the tank, ot v. intrusive, should be fine?

Link to comment
Share on other sites

Because you won't have space to hide your ATO, I suggest looking at delighting's ato system. Tunze osmolator is good, as long as you don't mind abit more clutter.

I'm not familar with american pinpoint's orp n ph monitor, but I just leave my american pinpoint salinity monitor in the tank, ot v. intrusive, should be fine?

Delighting has ATO? k will check it out.

the american pinpoint should be okays. Just 1 probe each. I used to have them. Do not think they will be very visible.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member

hi bro, mine is only 12g and half a pack already filled up 5cm height of sand in the nano cube already haha.

thrown in the other half in a plastic bowl and put it in my refug, looks cool!

btw, found this on the web and can share with you.

Gravel in Aquarium:

To determine the number of pounds of gravel required for a rectangular aquarium

Length (in inches) x Width (in inches) x Desired gravel Dept (in inches) x 0.05 = how many pounds of sand needed

hope this help bro

Link to comment
Share on other sites

  • SRC Supporter
Last but not least, the JBJ 24G Nano cabinet

Went hunting around for a low side table that can be used as a stand but unable to find one at a reasonable price.

The black background actually blend in well with the cabinet.

This is my probably my last update for the next 2 - 3 weeks.

Till my Tunze, MP10, and other stuff arrives.

Gotta wrap up the tank for the time being.

Any comments, suggestions , pls feel free to shoot them off here.

No offence will be taken :blush:

Impressive!!!! I like the clean and straight forward concept of this tank... :)

But how are u going to set up the filtration? I still can't imagine.... care to explain more?

Link to comment
Share on other sites

hi bro, mine is only 12g and half a pack already filled up 5cm height of sand in the nano cube already haha.

thrown in the other half in a plastic bowl and put it in my refug, looks cool!

btw, found this on the web and can share with you.

Gravel in Aquarium:

To determine the number of pounds of gravel required for a rectangular aquarium

Length (in inches) x Width (in inches) x Desired gravel Dept (in inches) x 0.05 = how many pounds of sand needed

hope this help bro

Thanks Onizuka.

The formula can apply to dry sand but not the live sand.

The live sand package contains some liquid which makes the bag of sand much heavier.

Using the formula, I need only about 16 lbs but I need at least 3 packs of 20lbs live sand :cry2:

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

yupz! n its quite a good price too!

http://delightings.com/index.cfm?GPID=14

okie, me gonna turn in, nitez to u bro!

Ya a nite bird like me Comycus lol

The delighting one has 2 probes.... gosh.

My whole back wall will seem like a hardware panel.....

Leaning towards Tunze for the time being, just a bracket and a prope clipping on it.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
Impressive!!!! I like the clean and straight forward concept of this tank... :)

But how are u going to set up the filtration? I still can't imagine.... care to explain more?

Hi bro! he's using Tunze reefpack 200, is like all in one filter/skimmer. Really nice product, same as its bigger brother. But only issue is the doc skimmer requires almost constant water levels, tt's why ATO is a must :)

Link to comment
Share on other sites

  • SRC Member
Ya a nite bird like me Comycus lol

The delighting one has 2 probes.... gosh.

My whole back wall will seem like a hardware panel.....

Leaning towards Tunze for the time being, just a bracket and a prope clipping on it.

lol last night was abit too late la... woke up this morning at 7, until now still haven't recovered... <_<

Tunze's good! hide the bucket inside the cabinet, then next time can add on the calcium dispenser if you want :)

Link to comment
Share on other sites

Impressive!!!! I like the clean and straight forward concept of this tank... :)

But how are u going to set up the filtration? I still can't imagine.... care to explain more?

Thanks Mit.

Heres the picture of the Reefpack200.

Unable to post the Tunze url.

Nano Reefpack 200

(0200.000)

TUNZE® Nano Reefpack 200 constitutes a new water treatment concept for small reef aquariums from 40 to 200 litres (10.5 to 52.8 USgal.). It consists of a Nano DOC Skimmer 9002 with a 150-litre (39 USgal.) air output, a mechanical Nano Cleaner with a pump (800 l/h / 211 USgal./h) and a magnet holder. The Nano Reefpack has been designed for beginners as well as for experienced aquarists. Thus, it is possible to operate a small marine or reef biotope aquarium in any standard glass tank without any complications. The water is treated on the basis of dirt removal and contains no biological stages. Like all TUNZE® components, the Nano Reefpack is a modular solution, which can be supplemented with Osmolator 3155 and Calcium Dispenser 5074, et cetera.

The Nano Reefpack 200 in detail:

SKIMMER: Nano DOC Skimmer 9002.

FILTER: Nano Filter 3165 with an output of 800 l/h (211 USgal./h), Micro Wadding 872.01 and filter bag for activated carbon and other absorbers, such as for phosphate.

STORAGE TANK: 5002.10: with a volume of 13 litres (3.4 USgal.); is used to hold the refill water.

HOLDING DEVICE: The Nano Reefpack is supplied with Magnet Holder 6025.50 as a standard feature to permit mounting at any point in the aquarium (up to a glass thickness of 19mm (.47 in.).

POWER CONSUMPTION: Only 16 W for all components, 230 V / 50 Hz (115 V / 60 Hz).

DELIVERY CONDITION: Completely ready for mounting with patented Magnet Holder, storage tank and filter wadding. Dimensions of the skimmer cup: L120 x W 114 x H 338 cm (L4.7 x W4.4 x H13.3 in.).

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member

WOW! That is really neat and modern looking! You should consider plans to hide your reefpack and lighting, this open top look is quite designer and artsy :P

Using the JBJ stand for your tank is a master stroke, it looks 100X better than using it with a JBJ tank. Sorry if I sound excited, I wish I came up with that idea hahahaha.

By the way, you don't have to buy the magic eraser from Amazon, Daiso sells a series of similar products in various sizes. Can be found at supermarkets and neighbourhood sundry stores too. And i'm sure you know this, but it's better to clean the glass with a plastic card nearer to the bottom, sponges and magnet cleaners will drag the sand and cause massive deep scratches to your acrylic surface.

My 1.5ft nano cube

My 24G nano tank (Decommed)

I can picture in my mind a world without war, a world without hate.

And I can picture us attacking that world, because they'd never expect it.

-- Jack Handey

Link to comment
Share on other sites

WOW! That is really neat and modern looking! You should consider plans to hide your reefpack and lighting, this open top look is quite designer and artsy :P

Using the JBJ stand for your tank is a master stroke, it looks 100X better than using it with a JBJ tank. Sorry if I sound excited, I wish I came up with that idea hahahaha.

By the way, you don't have to buy the magic eraser from Amazon, Daiso sells a series of similar products in various sizes. Can be found at supermarkets and neighbourhood sundry stores too. And i'm sure you know this, but it's better to clean the glass with a plastic card nearer to the bottom, sponges and magnet cleaners will drag the sand and cause massive deep scratches to your acrylic surface.

Thanks bud!

The reason i did not do an IOS is because of cost and flexibility. I also wanted to have that little extra gallon without IOS. The acrylic maker are not tank specialist so I need to be very precise with the dimensions which I am not very good with. If anything is wrong, I would have to birng it back to them to redo the tank.... just don't have time for those things. Rather stay with the KISS theory (Keep it simple) The background is black So I am hoping it will not be too obvious.

For the lighting, I will definitely end up with a hanging fixture. Just whether it is a DIY LED, or Eco KR2 or Giesseman Nova... I am still undecided.

I did try looking for melamine sponge. Carrefour was out of stock. The sundry stores had ones that comes with Japanese wordings and it seem there are 2 different packaging. Not sure which one i should get. Did not have a chance to drop by IMM. Yeah for a start I will use Mr Clean and in the meantime try the local ones on my tank cover as an acid test.

I have been thinking about cleaning the acrylic near the edge around the sand bed. I usually siphon the sandbed when doing wc. SO I guess I will off the pump and try to siphon the sand around the walls away then clean the tank wall. hopefully this will minimize scratches. I think it is inevitable that I will get scratches a the base. Just hope i can minimize it.

yup i have heard about the credit card trick.

Just wondering if anyone else here in this forum owns an acrylic? would love to hear from them.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

Hmm actually I dislike the Tunze circular collection cup. Thinking of customizing it to have a hose direct the waste to a collection bottle at the bottom of the tank.

Well can only plan on this when I see the actual skimmer. If anyone has any idea, let me know pls.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member

Nice...Would like to see the whole setup with the Tunze Nano Reefpack 200. :P

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Supporter

Thanks Mit.

Heres the picture of the Reefpack200.

Unable to post the Tunze url.

Wow. thks for the info.. haha... sadly the width of the product is too big for my tank. If not, also can consider... anyway, looking forward to more of your tank set up pics...

:)

Link to comment
Share on other sites

Wow. thks for the info.. haha... sadly the width of the product is too big for my tank. If not, also can consider... anyway, looking forward to more of your tank set up pics...

:)

Arh yours is the wall mount tank.... how about just the Tunze 9002 skimmer? think that will be about 5cm width.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      加拿大保录取_SFU毕业证成绩单——Q微信751558146西蒙菲莎大学学位证_成绩单_办理SFU文凭学历认证Simon Fraser University

    2. 0

      美国学位证_Brandeis毕业证成绩单+Q微信751558146布兰迪斯大学学位证_成绩单_办理Brandeis文凭学历认证Brandeis University

    3. 0

      加拿大保录取_UBC毕业证成绩单——Q微信751558146英属哥伦比亚大学学位证_成绩单_办理UBC文凭学历认证University of British Columbia

    4. 0

      美国学位证_PSU毕业证成绩单+Q微信751558146宾州州立大学学位证_成绩单_办理PSU文凭学历认证Penn State University Park

×
×
  • Create New...