SRC Member marinereef Posted December 10, 2003 SRC Member Share Posted December 10, 2003 Hi..... Can anyone help.....what is the flow rate recommended to run a chiller? Quote Link to comment Share on other sites More sharing options...
weileong Posted December 10, 2003 Share Posted December 10, 2003 depends on the chiller lor. Quote Weileong's 4ft tank Part I Weileong's 4ft tank Part II Link to comment Share on other sites More sharing options...
terryansimon Posted December 10, 2003 Share Posted December 10, 2003 I would think its dependant on the chiller itself. Quote Link to comment Share on other sites More sharing options...
SRC Member marinereef Posted December 10, 2003 Author SRC Member Share Posted December 10, 2003 My chiller is Teco RA200....but it takes abt 4-5hrs to bring down to 26 which I preset this temp Is this normal?? How abt u guys having ur chiller running?? I am using a pump rate of 1000l/hr to run it. Quote Link to comment Share on other sites More sharing options...
SRC Member marinereef Posted December 10, 2003 Author SRC Member Share Posted December 10, 2003 According to manual specs....min pump rate is 400l/hr but never stated the max rate. Afraid my chiller is over run/overheat and e-bills. Quote Link to comment Share on other sites More sharing options...
terryansimon Posted December 10, 2003 Share Posted December 10, 2003 maybe a slower flow through rate may help? Quote Link to comment Share on other sites More sharing options...
SRC Member marinereef Posted December 10, 2003 Author SRC Member Share Posted December 10, 2003 Thanks Terry....I will try it out Quote Link to comment Share on other sites More sharing options...
SRC Member pospeh Posted December 10, 2003 SRC Member Share Posted December 10, 2003 Tecos have flow restrictors that limit the flow rate to 400 l/h or it doesnt matter how powerful a pump you are using. The RA 200 is their smallest model and is really only suitable to 200L tanks. What is the size of your tank? Quote Link to comment Share on other sites More sharing options...
SRC Member marinereef Posted December 10, 2003 Author SRC Member Share Posted December 10, 2003 My Tank is 36 x 18 x 18 inch....is my chiller too small for it? I am using T5 double tube retrofit on my tank. I think heat source is not that much. Pls advise. Thanks Quote Link to comment Share on other sites More sharing options...
SRC Member marinereef Posted December 10, 2003 Author SRC Member Share Posted December 10, 2003 Hi pospeh.... Is it true that Teco chiller have a flow restrictor built -in system?Becoz the manual didnt stated that. Thanks Quote Link to comment Share on other sites More sharing options...
Sponsor dr evil Posted December 11, 2003 Sponsor Share Posted December 11, 2003 Hi pospeh.... Is it true that Teco chiller have a flow restrictor built -in system?Becoz the manual didnt stated that. Thanks yap its true.... where did u put the chiller? does it have good vendilation?? If it works properly, it should not take that long to chill...... Quote Link to comment Share on other sites More sharing options...
SRC Member Tanggy Posted December 11, 2003 SRC Member Share Posted December 11, 2003 Just to check with all bors. Is it normal as my chiller takes bout 30mins to cool 0.5 deg and it runs for 30 min every 2hrs. Am I overworking it? Or is this normal? Cos I have read some people chiller runs for 10mins ( but sound like a drastic drop leh). I am running through my return pump (ehiem 1260/2400lt per hr). Do I need to get another pump for the chiller?? I am using a 1/4hp chiller to chill bout 75 gallons of water. Quote Link to comment Share on other sites More sharing options...
SRC Member nutx Posted December 11, 2003 SRC Member Share Posted December 11, 2003 Just to check with all bors. Is it normal as my chiller takes bout 30mins to cool 0.5 deg and it runs for 30 min every 2hrs. Am I overworking it? Or is this normal? Cos I have read some people chiller runs for 10mins ( but sound like a drastic drop leh). I am running through my return pump (ehiem 1260/2400lt per hr). Do I need to get another pump for the chiller?? I am using a 1/4hp chiller to chill bout 75 gallons of water. Just to share this. I use a eheim 1260 (2400l/hr) alone for my chiller, it will run 10mins every hour. variance at +/- 0.5 degree. When I T-off my return pump which is a 3000l/hr, I suspect the flow rate is like 800l/hr, the chiller will run 25mins every 2 hours. so, now I use back the eheim 1260. my tank is abt a 3ft tank, with a 3ft sump. Chiller is the Korean brand, 1/3hp Quote Link to comment Share on other sites More sharing options...
SRC Member marinereef Posted December 11, 2003 Author SRC Member Share Posted December 11, 2003 My chiller is placed beside my tank...in open area,I am sure it have the best ventilation. I still think that...it is abnormal to run for 4-5hrs in order to bring the temp.2 degrees down. Do I need to service or gas charging for my compressor? Pls advise... Thanks Quote Link to comment Share on other sites More sharing options...
Sponsor dr evil Posted December 11, 2003 Sponsor Share Posted December 11, 2003 u should let us know the chiller brand and your tank volume. That might help alot.... is the chiller under power? Quote Link to comment Share on other sites More sharing options...
SRC Member marinereef Posted December 11, 2003 Author SRC Member Share Posted December 11, 2003 I had stated already....Teco RA200 and a 50g tank..no sump According to chiller specs...supposed to be enough... 300l at 25 degree Anyway....how long do u guys chiller runs and cut off?? Quote Link to comment Share on other sites More sharing options...
SRC Member Tanggy Posted December 11, 2003 SRC Member Share Posted December 11, 2003 You mean the chiller only kick in when the temp change by 2 deg?? isnt that a bit large variation. Normally the chiller will kick in when the temp change by 1/2deg. Also if it runs for 4-5hrs non stop it is definitely over working. My tank drop about .5deg in less than 30min. And run once every 2hrs. But also depends on what temp you set. One question for bros. What pump you guys use for the chiller? seperate pump or the return? the spec of you pump? I using 1/4HP. Thanks Quote Link to comment Share on other sites More sharing options...
SRC Member marinereef Posted December 11, 2003 Author SRC Member Share Posted December 11, 2003 I am using canister filter to chiller eheim 2217 specs 1000l/hr rate I have call up aquatechnic they say ...factory preset is 2 degree different to cut in compressor. I think this is the preset problem ,maybe ur chiller preset timing is shorter from other maker. So...anybody here using Teco chiller would like to clarify?? How is Teco chiller member here ...using their chiller cut in and out of 2 degree?? Pls help me bros. Quote Link to comment Share on other sites More sharing options...
Sponsor dr evil Posted December 11, 2003 Sponsor Share Posted December 11, 2003 im using RA680. yap, mine have 2 deg differential......but it can be set. Quote Link to comment Share on other sites More sharing options...
terryansimon Posted December 11, 2003 Share Posted December 11, 2003 hystersis should be able to set what. my Eido one is on 3 somemore. (= Quote Link to comment Share on other sites More sharing options...
SRC Member alvy Posted December 11, 2003 SRC Member Share Posted December 11, 2003 actually there is a reason why some chillers are set at 2 deg differential/hystersis. If the temp controller's accuracy only has a resolution to the nearest one, meaning no decimal point then setting 2 deg should be proper. For example if the target temp is set at 25 deg, the hystersis range in actual would be between 25.9 to 27.0 deg. since it cannot react to 0.1 deg changes, when the chiller cool till 25.9 deg, the registering temp would already be 25 on the controller display hence it would cut off. similarly when temp reaches 26.9, a 0.1 deg increment would kick on the chiller on at 27 deg! so the actual change in temp is 1.1 deg! tt's the problem with my temp controller. accuracy is to nearest 1 deg. if i set hystersis to 1 deg, then the chiller will shut down between 25.9 and 26.0-26.1 deg which is only 0.1-0.2 hystersis! dumb isn't it! Quote Link to comment Share on other sites More sharing options...
terryansimon Posted December 11, 2003 Share Posted December 11, 2003 sounds like Eido. Eido hystersis is at two because when the water is purged out from the exchanger unit, the temperature starts to increase. since the probe is set into the exchanger itself *I Think!*, therefore a 1deg hystersis will cause the chiller to turn on and off and on and off. display may read 25deg but actual temp is really 26deg! so if I set hystersis to 3 at temp of 25, the actual body of water is at 26deg and my chiller will turn on at 28! hehz complicated...took a while to understand. Quote Link to comment Share on other sites More sharing options...
SRC Member alvy Posted December 11, 2003 SRC Member Share Posted December 11, 2003 hehe..yeah took me a while to figure y the chiller snaps in every 1/2hr and run a short while when i remember some of you telling me tt their chiller can rest for 1-2 hrs before kicking in again! anyway i put my temp probe in the 1st compartment of my sump where water enters from the main tank. The chiller release goes to the sump's last compartment where the water get mix and pump back into the main tank. Quote Link to comment Share on other sites More sharing options...
terryansimon Posted December 11, 2003 Share Posted December 11, 2003 ah yes sama sama. I called Eido up and Gerard told me why you see. so. hehz. Quote Link to comment Share on other sites More sharing options...
SRC Member marinereef Posted December 11, 2003 Author SRC Member Share Posted December 11, 2003 im using RA680. yap, mine have 2 deg differential......but it can be set. How to set to 1 degree differential?? And how long is ur chiller run and cut off to preset temp? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.