Jump to content

WTS - ATI Powermodule 4ft(4 tubes) - 3 sets, 4ft(2 tubes) & Deltec


Solo77
 Share

Recommended Posts

Ok, got the following for sales

1. ATI powermodule 4ft(4 tubes) - have 3 sets, selling $450 each.

2. ATI powermodule 4ft(2 tubes) - 1 set, selling $150

3. Deltec PF600s CR - selling $200, comes with aquabee 3000 pump but needs to change impellor

4. Jebao canister filter - 1200L/hr for $40 and H & H canister filter - 600L/hr - $20.

If interested, please pm me. Viewing and collection at sengkang. Thanks for your attention.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Thanks for the upzzz.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

  • SRC Member
Ok, got the following for sales

1. ATI powermodule 4ft(4 tubes) - have 3 sets, selling $450 each.

2. ATI powermodule 4ft(2 tubes) - 1 set, selling $150

3. Deltec PF600s CR - selling $200, comes with aquabee 3000 pump but needs to change impellor

4. Jebao canister filter - 1200L/hr for $40 and H & H canister filter - 600L/hr - $20.

If interested, please pm me. Viewing and collection at sengkang. Thanks for your attention.

Uppzz for u, bro with well taken care equipments :)

Main Tank: 5 x 1 x 1

Return from overflow: Eheim compact+ 5000

Lighting: 2x 54W T5

Skimmer: Deltec SC 1350

Chiller: Arctica 1/10

Wave Maker: Tunze Nano Wavebox & Tunze 6055 with Photocell
Monitor 1: American Marine Pinpoint pH monitor
Monitor 2: American Marine Pinpoint Temperature monitor

Link to comment
Share on other sites

thks bro. catch up with you soon.

updates, deltec pf600s sold.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Updates: 1 set of 4ft 4 tubes ATI powermodule has been reserved. Thanks for your attention.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Left the canister filters, 2 sets of 4ft 4 tubes ATI powermodule and 1 set of 4ft 2 tubes ATI powermodule.

Some introduction of ATI powermodule...

ATI T5 Powermodul Active Cooling has an active adjustment fan for colling the power electronics and T5 which helps to increase brightness by more than 15%. The high quality silver coated reflector (98% light reflection) further increases the brightness by 10%.

Features: Speed Adjustment cooling fan, 4mm plexi glass protector, individual silver coated reflector.

Had done T5 light research and think this is one of the best T5 lightset you can find. Got it from bro Tomini/Tineng when he decom and for the 2 tubes one was from Bro Francis. Both have success in using this lightset in their tank.

Looking for genuine buyer who appreciate ATI powermodule like me. Selling as i gotten a 10 tubes ATI powermodule. Not in a hurry to sell as if can't sell, i will keep the parts for spare. Hence, low ballers please don't attempt.

Thanks for your attention.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

  • 3 weeks later...

2 tubes 4ft ATI powermodule set sold. The rest still available. Thanks.

Left the canister filters, 2 sets of 4ft 4 tubes ATI powermodule and 1 set of 4ft 2 tubes ATI powermodule.

Some introduction of ATI powermodule...

ATI T5 Powermodul Active Cooling has an active adjustment fan for colling the power electronics and T5 which helps to increase brightness by more than 15%. The high quality silver coated reflector (98% light reflection) further increases the brightness by 10%.

Features: Speed Adjustment cooling fan, 4mm plexi glass protector, individual silver coated reflector.

Had done T5 light research and think this is one of the best T5 lightset you can find. Got it from bro Tomini/Tineng when he decom and for the 2 tubes one was from Bro Francis. Both have success in using this lightset in their tank.

Looking for genuine buyer who appreciate ATI powermodule like me. Selling as i gotten a 10 tubes ATI powermodule. Not in a hurry to sell as if can't sell, i will keep the parts for spare. Hence, low ballers please don't attempt.

Thanks for your attention.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...