chiller, when to service?

[tiffanydunk]

hw do we know it's time to be serviced?

[RockyBoy]

hw do we know it's time to be serviced?

If you have filters, clean it every 2 months. Every a year or 1.5 years, you can buy the cleaning acid at the refrigeration shop to clean the cooling coils. If it takes longer to cool down your tank, may be need to top-up the gas.

[tiffanydunk]

If you have filters, clean it every 2 months. Every a year or 1.5 years, you can buy the cleaning acid at the refrigeration shop to clean the cooling coils. If it takes longer to cool down your tank, may be need to top-up the gas.

yo bro, topping up gas can DIY?

[RockyBoy]

yo bro, topping up gas can DIY?

If you know how to, yes can DIY. If not, just pay for the services.

[[V]tEc]

yo bro, topping up gas can DIY?

topping up of gas is not easy n u need the right tool to do it.if there a leak, then u r making thing worse.....juz pay for the service. anyway, u dun top up the gas very often.

[ReDDeviLs]

bro, topping up gas means its leaking inside liao,chiller dun haf to topup gas 1..

it works juz like ur aircon and fridge.

was told to me by 2 chiller service personal.

[tiffanydunk]

bro, topping up gas means its leaking inside liao,chiller dun haf to topup gas 1..

it works juz like ur aircon and fridge.

was told to me by 2 chiller service personal.

if no need to topup gas, wad do we really service our chiller for?

[RockyBoy]

if no need to topup gas, wad do we really service our chiller for?

Your chiller will have a fan and this fan will draw air into it to remove heat from the aluminium fins. The aluminium fins are tightly pack to increase the surface area. Dust is easily trapped or stucked onto the fins as the air is not so clean. After a long while the efficiency of the fins will be not so good and will take a longer time to chill the water. So need to do chemical cleaning on the fins. This is easy to DIY.

Also, once a while, need to flush your inlet/outlet of the chiller. Normally I use vinegar. Just leave about 10-15 minutes and flush again with running water. Lots of minute coco worms will comeout...

My pacific cool chiler has been running for 4-5 years without ever topping up the gas. I just do the aboev only every 2 years.

[ReDDeviLs]

Your chiller will have a fan and this fan will draw air into it to remove heat from the aluminium fins. The aluminium fins are tightly pack to increase the surface area. Dust is easily trapped or stucked onto the fins as the air is not so clean. After a long while the efficiency of the fins will be not so good and will take a longer time to chill the water. So need to do chemical cleaning on the fins. This is easy to DIY.

Also, once a while, need to flush your inlet/outlet of the chiller. Normally I use vinegar. Just leave about 10-15 minutes and flush again with running water. Lots of minute coco worms will comeout...

My pacific cool chiler has been running for 4-5 years without ever topping up the gas. I just do the aboev only every 2 years.

yeap thats real true about the dust thingy,

for the coco worms.. have yet to try! haha

[tiffanydunk]

ah and so i see.. thanks bros.