Jump to content

Pump for Pacific Cool 3/4 HP


klyve
 Share

Recommended Posts

HI i'm using chillier Pacific Cool 3/4 HP, would like to know the what spec of pump should i use if i'm using it as my 2nd return for my 5 ft tank?Currently i'm using ocean runner 6500 as my first return... :thanks:

|| Tank: 5x2x2.5 || Sump 3.5x1.5.1.5 || Lights: DeLighting 2x80w Aquable Special T5 ||

|| Return: 2 x ehiem 1264 || Skimmer: Skimz SM251 ||

|| CR: deltec denitrator || ATO with custom make reservior tank||

|| FR: TLF running Rowas ,UV ||

|| Wavemaker: Jebao RE20& RW15|| Chiller: Daikin 1HP Compressor ||

|| Monitor 1: American Marine Pinpoint Temperature monitor ||

Link to comment
Share on other sites

HI i'm using chillier Pacific Cool 3/4 HP, would like to know the what spec of pump should i use if i'm using it as my 2nd return for my 5 ft tank?Currently i'm using ocean runner 6500 as my first return... :thanks:

any bro or sis out there can give me some advice.. :thanks:

|| Tank: 5x2x2.5 || Sump 3.5x1.5.1.5 || Lights: DeLighting 2x80w Aquable Special T5 ||

|| Return: 2 x ehiem 1264 || Skimmer: Skimz SM251 ||

|| CR: deltec denitrator || ATO with custom make reservior tank||

|| FR: TLF running Rowas ,UV ||

|| Wavemaker: Jebao RE20& RW15|| Chiller: Daikin 1HP Compressor ||

|| Monitor 1: American Marine Pinpoint Temperature monitor ||

Link to comment
Share on other sites

  • SRC Member

I suggest you either tee out from your primary return to the chiller. I would not advise using a pump too powerful channeled to your chiller then as return to your tank. Flow will be too high for your chiller resulting in inefficient chilling of your tank.

Link to comment
Share on other sites

I suggest you either tee out from your primary return to the chiller. I would not advise using a pump too powerful channeled to your chiller then as return to your tank. Flow will be too high for your chiller resulting in inefficient chilling of your tank.

Oh bro then for the chiller to efficient to chill the tank wat flowrate of pump should i use to cool down 5ft by 2 by 2.5?if i now use 2 seperate pump

1st return ocean runner 6500L/H

so for the 2nd return what flow rate should i use? :thanks:

|| Tank: 5x2x2.5 || Sump 3.5x1.5.1.5 || Lights: DeLighting 2x80w Aquable Special T5 ||

|| Return: 2 x ehiem 1264 || Skimmer: Skimz SM251 ||

|| CR: deltec denitrator || ATO with custom make reservior tank||

|| FR: TLF running Rowas ,UV ||

|| Wavemaker: Jebao RE20& RW15|| Chiller: Daikin 1HP Compressor ||

|| Monitor 1: American Marine Pinpoint Temperature monitor ||

Link to comment
Share on other sites

i think if you use OR3000 should be fine.....

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

i think if you use OR3000 should be fine.....

sorry bro u mean return & chiller both using 2 seperate OR3000 pump?

|| Tank: 5x2x2.5 || Sump 3.5x1.5.1.5 || Lights: DeLighting 2x80w Aquable Special T5 ||

|| Return: 2 x ehiem 1264 || Skimmer: Skimz SM251 ||

|| CR: deltec denitrator || ATO with custom make reservior tank||

|| FR: TLF running Rowas ,UV ||

|| Wavemaker: Jebao RE20& RW15|| Chiller: Daikin 1HP Compressor ||

|| Monitor 1: American Marine Pinpoint Temperature monitor ||

Link to comment
Share on other sites

hi bro, you have consider whether you want to save money to just have one pump. If the answer is yes, then you have to understand if one fails, all fail. Anyway, in my opinion, it will be good to have 2 returns. Incase one down, there is another pump to ensure water circulation. If you want to do T-off, you must ensure valve is catered for each opening ...this is to allow you to do maintenance. Just remember T-off will cause headloss and any elbow joint will also add to it.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

ok bro think i got what u mean..Currently my 1st return using OR6500 so mine 2nd return use OR3500 & the chiller using pump flow rate of 3500l/h is it enough? :thanks:

|| Tank: 5x2x2.5 || Sump 3.5x1.5.1.5 || Lights: DeLighting 2x80w Aquable Special T5 ||

|| Return: 2 x ehiem 1264 || Skimmer: Skimz SM251 ||

|| CR: deltec denitrator || ATO with custom make reservior tank||

|| FR: TLF running Rowas ,UV ||

|| Wavemaker: Jebao RE20& RW15|| Chiller: Daikin 1HP Compressor ||

|| Monitor 1: American Marine Pinpoint Temperature monitor ||

Link to comment
Share on other sites

ya....err...cant remember whether is it OR3000 or OR3500. Use that return as chiller pump. So in case one is down, the other still runs but if both ....touch wood...then consider suai.....lol. You know the recommended flow rate for your chiller? If 3000 or 3500 is slightly higher than the recommended, it should be fine due to headloss through all the elbow joint, etc. Me also learning, so maybe experienced bro or sis can confirm this. All the best.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

But i dont know the recommend flow rate for this chiller... :ph34r:

any bro using pacific cool 3/4 HP chiller can advice? :thanks:

|| Tank: 5x2x2.5 || Sump 3.5x1.5.1.5 || Lights: DeLighting 2x80w Aquable Special T5 ||

|| Return: 2 x ehiem 1264 || Skimmer: Skimz SM251 ||

|| CR: deltec denitrator || ATO with custom make reservior tank||

|| FR: TLF running Rowas ,UV ||

|| Wavemaker: Jebao RE20& RW15|| Chiller: Daikin 1HP Compressor ||

|| Monitor 1: American Marine Pinpoint Temperature monitor ||

Link to comment
Share on other sites

maybe you can do a past search on reefers setup to understand or check with the maker....if you know the maker...hehe

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

  • Moderators

The OR3500 should be good enough to act as chiller pump. From my understanding, PC chiller do not have flow restriction. You should get at least 2500L/H minus head lost.

There is only a handful of chiller in the market which had restricted flow where high volume pump is not recommended. E.g. Teco RA680

Tom

Link to comment
Share on other sites

thanks bros for the advice,so i will use 1 OR3500 for my chillier & return as my 2nd return..

|| Tank: 5x2x2.5 || Sump 3.5x1.5.1.5 || Lights: DeLighting 2x80w Aquable Special T5 ||

|| Return: 2 x ehiem 1264 || Skimmer: Skimz SM251 ||

|| CR: deltec denitrator || ATO with custom make reservior tank||

|| FR: TLF running Rowas ,UV ||

|| Wavemaker: Jebao RE20& RW15|| Chiller: Daikin 1HP Compressor ||

|| Monitor 1: American Marine Pinpoint Temperature monitor ||

Link to comment
Share on other sites

no problem Given a chance, hope to see your tank....hehe...you staying around sengkang right...me 2 and a couple of bros here....hehe.

thanks bros for the advice,so i will use 1 OR3500 for my chillier & return as my 2nd return..

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

No problem...But my tank still long way to go....yup i stay at sengkang...Hope to meet up with u & a couple of bros also staying around here...hee hee

|| Tank: 5x2x2.5 || Sump 3.5x1.5.1.5 || Lights: DeLighting 2x80w Aquable Special T5 ||

|| Return: 2 x ehiem 1264 || Skimmer: Skimz SM251 ||

|| CR: deltec denitrator || ATO with custom make reservior tank||

|| FR: TLF running Rowas ,UV ||

|| Wavemaker: Jebao RE20& RW15|| Chiller: Daikin 1HP Compressor ||

|| Monitor 1: American Marine Pinpoint Temperature monitor ||

Link to comment
Share on other sites

which part of SK do you stay in...

hammy, sunny03, darric72, weapon master, etc stay in rivervale...

reefzzz, fishtalk...etc stay in fernvale....

Ahlee...anchorvale...

johnnyblaze, redstar , etc in compassvale...

must form a neighbour watch group for reef tank.... : )

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

which part of SK do you stay in...

hammy, sunny03, darric72, weapon master, etc stay in rivervale...

reefzzz, fishtalk...etc stay in fernvale....

Ahlee...anchorvale...

johnnyblaze, redstar , etc in compassvale...

must form a neighbour watch group for reef tank.... : )

i stay at anchorvale link....

yup agree must form a neighbour watch group...hee hee espically fernvale all the good stuff are over there..Hee Hee :eyebrow:

|| Tank: 5x2x2.5 || Sump 3.5x1.5.1.5 || Lights: DeLighting 2x80w Aquable Special T5 ||

|| Return: 2 x ehiem 1264 || Skimmer: Skimz SM251 ||

|| CR: deltec denitrator || ATO with custom make reservior tank||

|| FR: TLF running Rowas ,UV ||

|| Wavemaker: Jebao RE20& RW15|| Chiller: Daikin 1HP Compressor ||

|| Monitor 1: American Marine Pinpoint Temperature monitor ||

Link to comment
Share on other sites

then you should be staying very near bro ahlee. Went to his place yesterday. : )

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...