Jump to content

Shun's 2nd tank: 3x2x2

yongshun

By yongshun,
in Members Tank & Specs

 Share

Recommended Posts

yellowtanker Newbie

yellowtanker

Posted
Posted
haha thks a lot bro, i dun mind having some chaeto hehe my main concern of having a scrubber is bcos it will requires lighting...chaeto is ok bcos im planning to throw into my betta box inside the main tank...den if i on my lighting in my sump, yes, algae will grow on the srubber, bt it will oso grow on my pumps in the sump oso lor...will have a hard time doing maintenance for my pumps...bt im tinkin of getting a black color cover to cover the srubber, so tat the light will onli be contained in the cover n srubber, n nt onto my pumps....feasible?

OK. Will pass u some chaeto. U stay AMK right? Will be back next weekend.... so if i passing by yr area, will sms u. Or if u like, can come my place as i intend to arrange a get-together with some bros on a sunday.

Don't understand the concern about the algae on the pumps?? :unsure: Remember the algae grows on the scrubber (plastic sheet or cloth) outside the water ie. where the water touches the air allowing exchange of air/water - that is where the algae grows best. If there is no fast flow of water + exchange of air, you will not get good algae growth. If you need a clip-on lamp/bulb holder, i may have a spare one for you too... that is, if u decide to build one in the sump area.

Cheers,

Link to comment
Share on other sites
  • Replies 417
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

yongshun Newbie

yongshun

Posted
  • Author
Posted
bro ur temp dont have 0.5 degrees difference huh?

2-3degree diff some sensitive corals/fish will be stress.

nope..its 1 deg difference...bt shdnt realli matter nw..cos haven throw in ne ting yet...bt once im throwing in LS, i will adjust to 27...juz tried changing to a stronger pump, n on my gravity feed pipe n let more water flow to the sump at a faster rate...hopefully ths can solve my problem...


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6
Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites
  • SRC Member
Vlamingi_cont Newbie

Vlamingi_cont

Posted
  • SRC Member
Posted
the vanuatu mystery shld fit the bill :)

Wah vri grand leh bro reddevils... "the" haha :lol:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites
yongshun Newbie

yongshun

Posted
  • Author
Posted
Is my new home ready??

haha gif it 2 wks...it will be ready by den :)


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6
Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites
yongshun Newbie

yongshun

Posted
  • Author
Posted

new addition...using tis to supplement my mh...2x39W True Actinic

may wanna add another fixture in future n use my mh to supplement my T5 instead...

post-15010-1236953642.jpg


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6
Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites
yongshun Newbie

yongshun

Posted
  • Author
Posted
Bro, where to get this brand, solite har? :thanks:

i gt it frm petmart...u can gif benjamin a call


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6
Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites
  • SRC Member
Vlamingi_cont Newbie

Vlamingi_cont

Posted
  • SRC Member
Posted
new addition...using tis to supplement my mh...2x39W True Actinic

may wanna add another fixture in future n use my mh to supplement my T5 instead...

Wah bro... Not bad :eyebrow: How abt an FTS?? :eyebrow:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites
yongshun Newbie

yongshun

Posted
  • Author
Posted
Wah bro... Not bad :eyebrow: How abt an FTS?? :eyebrow:

haha nth to show at the moment bro, inside stil the same..onli live rocks nia hehe stil waiting for the tank to finish cycle...


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6
Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites
yongshun Newbie

yongshun

Posted
  • Author
Posted

juz finished transfer all my corals n some of my fishes over...some updates...all my ricordeas...

post-15010-1237654532.jpg


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6
Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites
yongshun Newbie

yongshun

Posted
  • Author
Posted

my zoas...nt all are being captured in the pic...

post-15010-1237654589.jpg

post-15010-1237654708.jpg


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6
Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites
yongshun Newbie

yongshun

Posted
  • Author
Posted

maybe i shd get a king coil mattress instead?

post-15010-1237693996.jpg


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6
Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites
yongshun Newbie

yongshun

Posted
  • Author
Posted

fts

post-15010-1237721794.jpg


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6
Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites
yongshun Newbie

yongshun

Posted
  • Author
Posted
Nice... lots of caves and arcs... plenty of room for gems as well! :eyebrow:

thks bro, yup...find tat it is still veri empty...wanna add tons of zoas, yumas, mushies, n rics lol :eyebrow:


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6
Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites
Solo77 Proficient

Solo77

Posted
Posted

same opinion....

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites
yongshun Newbie

yongshun

Posted
  • Author
Posted

bro u will have a hard time cleaning ur side glass

ops...tat has neber come across my mind b4...hmm tink i shd do something about it...


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6
Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites
yongshun Newbie

yongshun

Posted
  • Author
Posted
Nice rock workz you have there! :ooh::ooh: looks like you are geared up to fill up with softies and mushies.

thks for the compliment bro...my rockscape is done wif the help of another bro, im neber born wif the artistic cells :)


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6
Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites
Solo77 Proficient

Solo77

Posted
Posted

just use the width of a magnet cleaner as a guide with a bit more allowance.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites
yongshun Newbie

yongshun

Posted
  • Author
Posted
just use the width of a magnet cleaner as a guide with a bit more allowance.

ok..thks for the advice bro...will take note of tat


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6
Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 1

      Chaeto to Give Away - Postal Code 391030

      Chaeto to give away... Will throw by 24 Nov 2000hrs.
      Maverick77 in Swop Shop
    2. 0

      Clearing Space - Selling RBTA

      Clearing RBTA to reduce bio load. $4 per piece. Self-collect only at 30 Cassia Crescent
      Maverick77 in Sell off/Pasar Malam Shop
    3. 0

      LF bird nest coral

      Anyone selling bird nest coral? Preferably in the west. Can send me pics thanks
      damien05 in Sell off/Pasar Malam Shop
    4. 0

      WTS Items

      Selling the following Items due to upgrading to new Redsea Reefer 250 Tank. Redsea Max Nano Peninsula Complete System includes Reef safe ReefLED 50 Lighting, Pump provides 950 l/h(240gph), Rear Sump & Automatic Top-Off unit with a 1.5 liter reservoir, Redsea Aquarium Net Cover, Max Nano Filter Bag 100 micron (1 pcs New), Marco Rockscape, 2 X AF Rockscape. Tank dimension: Display tank length : 45 cm, height : 45 cm, width : 58.5 cm. Total system height : 132 cm, Total system water vol. : 100 L, Display tank water vol. : 87L, Ultra-clear Front & Side glass : 8mm, Bottom glass : 10mm - Letting go @ $780. Hailea HK-150A Chiller, 1/10hp - Letting go @ $250. Eheim 12/16mm Hose (3m Length)- Brand New and keep as spare- Letting go @ $12. Vortech MP10QD - Letting go @ $380. Anemone Guard (Compatible for Vortech MP10) - Letting go @ $20. Jebao Wifi Doser MD 4.4 - Letting go @ $60. Dosing Tube (4m Length) - Brand New and keep as spare - Letting go @ $10. Acrylic Dosing Tube Holder - Letting go @ $10. DD Compact ATO Unit - Letting go @ $70. Acrylic Reservoir 5litres - Letting go @ $50. Tunze Magnet Care Nano 0220.010 - Letting go @ $12. Redsea Complete 4-part Supplement Program - Brand New and keep as spare - Letting go @ $95. Redsea Dosing Tube (4 ea) - Brand New and keep as spare - Letting go @ $25. Salifert (KH) Test Kit - Expiry Date: 03/2028 - Letting go @ $16. Salifert (CA) Test Kit - Expiry Date: 03/2028 - Letting go @ $28. API Ammonia NH3/NH4 Test Kit - Expiry Date: 07/2027 - Letting go @ $14. Fauna Marin Min S - Liquid Coral Food (1000ml) - Expiry Date: 04/2026 - 90% Balance - Letting go @ $70. Flipper Platinum Scraper - Letting go @ $18. All items are bought in-between 2023-2024, Interested, please PM me. *All items is ready for self collection and arrange for your own transportation. Location: Jurong.
      DS868 in Sell off/Pasar Malam Shop
    5. 0

      WTS CO2 scrubber media

      Air skimz pro reef media. Balance around 2.1kg. $30 Collection 523608 Sent from my FCP-N49 using Tapatalk
      Jimbo in Sell off/Pasar Malam Shop
×
×
  • Create New...