Jump to content

for skimmer fanatics


Vlamingi_cont
 Share

Do you use dry or wet skimming  

43 members have voted

  1. 1. Do you use wet or dry skimming?

    • Dry
      17
    • Wet
      26


Recommended Posts

  • SRC Member
:rolleyes:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

Wet! :eyebrow:

Reefing since 2003
 4ft x 2ft x 2ft Mixed Reef (BB):-
50 Gal Sump,

Apex Controlled System (Lab grade),
Deltec SC1455 Protein Skimmer,
Vortech MP40wQD,

Jebao RW-15

Maxspect Razor 320w
Eheim 1260 Return Pump,
Hailea HS-66A 1/4HP chiller,
TLF Reactor 150, running HydroCarbon 



 

Link to comment
Share on other sites

  • SRC Member
Wild wild wet! -_-

Wah why all wet de huh?? izzit dry one will skim out supplements?? Read tat on the net... Didn't believe it... :lol::whistle

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member
Wet lor.... Weipro how to do dry??

Ooh... Oic...

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • 2 weeks later...
  • SRC Member

what wet and wads dry sorry no experience

Pain is temporary. It may last a minute, or an hour, or a day, or a year, but eventually it will subside and something else will take its place. If I quit, however, it lasts forever.


Member of:
www.marineaquarist.sg

Link to comment
Share on other sites

  • SRC Member
what wet and wads dry sorry no experience

Wet is that the skimmate is tea and fills up the collection cup faster... Dry is the foam will accumulate at the neck de and the cup will fill up slower... So that's the diff... :rolleyes:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member
What about those black kopi o one, consider wet?

Shld be dry de bah... ;)

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member
I think more wet than dry responses because producing dry skimmate normally needs more expensive skimmers :pirate:

well actually hns/deltec easy to use thus wet or dry can be easily achieve. but ofcoz wet skimmate means need to top up more water and clear the skimmate often

I am just an average FR (fish reefing) writer. If you like my FRs, please upz my points.

Link to comment
Share on other sites

  • SRC Member
well actually hns/deltec easy to use thus wet or dry can be easily achieve. but ofcoz wet skimmate means need to top up more water and clear the skimmate often

So wet skimmate is more "lehchay" in that sense... :rolleyes:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member
So wet skimmate is more "lehchay" in that sense... :rolleyes:

top up water ok lah. just like doing wc. but its the scary idea of the wet skimmate overflow to the floor. :(

I am just an average FR (fish reefing) writer. If you like my FRs, please upz my points.

Link to comment
Share on other sites

  • SRC Member
top up water ok lah. just like doing wc. but its the scary idea of the wet skimmate overflow to the floor. :(

Oh.. tat will be eww... :pirate:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • Senior Reefer
Oh.. tat will be eww... :pirate:

dun say eew....happen to me b4 ok? i carrying one collection cup FULL of wet skimmate....never hold properly and drop. splash all over my floor.................................had to clean it and the smell was :sick: learn my lesson...dun wait until so full....empty when half can le...

haha

Link to comment
Share on other sites

  • SRC Member
dun say eew....happen to me b4 ok? i carrying one collection cup FULL of wet skimmate....never hold properly and drop. splash all over my floor.................................had to clean it and the smell was :sick: learn my lesson...dun wait until so full....empty when half can le...

haha

oohh. that's a bad one... :pirate: My skimmate smells like rotten egg... :whistle

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • 2 weeks later...
  • SRC Member
Good to have 2 skimmers. 1 wet another is dry skimate.

Wun over kill meh?? :unsure:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

If u guys dun mind... :eyebrow: POst ur gunks here... :sick: Something like this... izzit wet or dry??

post-14611-1237345015.jpg

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member
If u guys dun mind... :eyebrow: POst ur gunks here... :sick: Something like this... izzit wet or dry??

woa vlamingi bro open page saw this

haha shock man hehe

:eyebrow:

Pain is temporary. It may last a minute, or an hour, or a day, or a year, but eventually it will subside and something else will take its place. If I quit, however, it lasts forever.


Member of:
www.marineaquarist.sg

Link to comment
Share on other sites

  • SRC Member

And of course...

post-14611-1237345427.jpg

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member
:eyebrow:

post-14611-1237345537.jpg

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Selling Nano Tank With FIlter and Chiller and Maxspect Jump L-130

    2. 2

      Fluval Sea Marine & Reef LED 2.0

    3. 225

      WTS live rotifers, tigger pods, phyto

    4. 0

      Corals to sell/give

    5. 0

      UQ毕业证【微信:A746103619】办理昆士兰大学毕业证 成绩单 留信认证The University of Queensland diploma

×
×
  • Create New...