RODI

[babareef]

Hi Bro. I'm thinking of buying a new RO/DI unit. Which brand is mostly used and have good reviews?

Any advise will be welcomed.

[TayHongSiang]

Crystal Pro

[babareef]

Where to get good bargains for Chem Marine or Kent Marine Brand?

[babareef]

Anyone using these two brands?

Where to get good bargains for Chem Marine or Kent Marine Brand?

[thxwong]

Crystal Pro is good buy for good price..i been use for a year.

[zorden]

Crystal Pro is good buy for good price..i been use for a year.

need 65 PSI TAP WATER PRESSURE OR A AQUATEC 8800 BOOSTER PUMP FOR BEST RESULTS WITH THIS SYSTEM?

[Fuzzy]

need 65 PSI TAP WATER PRESSURE OR A AQUATEC 8800 BOOSTER PUMP FOR BEST RESULTS WITH THIS SYSTEM?

Shouldn't need. Usually you only need high PSI for RO systems.

Crystal Pro is Carbon + 2 De-ionizing cartridge stages. My tap water pressure is not that high and the crystal pro is running fine.

Its a fairly low restriction filter, even with 3 stages, some people even run it without the tap turned on full so that it has more time to circulate through the filters.

But even with my Tap on full it goes in at about 59ppm TDS and comes out 0ppm TDS, the inline TDS meter is really a lot more useful than I thought it would be,

much less hassle to monitor the input/output water quality.

[weesy74]

Shouldn't need. Usually you only need high PSI for RO systems.

Crystal Pro is Carbon + 2 De-ionizing cartridge stages. My tap water pressure is not that high and the crystal pro is running fine.

Its a fairly low restriction filter, even with 3 stages, some people even run it without the tap turned on full so that it has more time to circulate through the filters.

But even with my Tap on full it goes in at about 59ppm TDS and comes out 0ppm TDS, the inline TDS meter is really a lot more useful than I thought it would be,

much less hassle to monitor the input/output water quality.

Anyone have any idea where to buy the inline tds?

Also just wondering, the water can drink?