Drill a hole + Pipe down to Sump

[dnsfpl]

where got provide such service?

how much does it cost?

wanna DIY a overflow for my 2 feet tank

thanks

[sherman]

where got provide such service?

how much does it cost?

wanna DIY a overflow for my 2 feet tank

thanks

Have you try SG Bros?

[markietan]

i asked them before, they dun do drilling but they do piping

cheers,

mark

[tansk]

U can try Vincent 96959086

This might help.

[dnsfpl]

understand from others that drilling the bottom part is not easy

how about the top corner?result will look something like this

feasible?

thanks

[sherman]

Cannot be.

You need the glass to rest flat then can do drilling

Side very hard.

The glass will crack easily

[vt_snowman87]

my dad has done drilling on the side of glass, with tank water reduced to half..

u need a drill with the diamond cutter.. and use masking tape to tape up a border, and keep adding water as u drill slowly.. so far, 4 holes in my dad's 10mm tank, and 2 holes in a smaller 2ft seahorse tank..

but u need to be really careful, and its a risk.. especially there's livestocks in the tank..

[sheltiejazz]

my dad has done drilling on the side of glass, with tank water reduced to half..

u need a drill with the diamond cutter.. and use masking tape to tape up a border, and keep adding water as u drill slowly.. so far, 4 holes in my dad's 10mm tank, and 2 holes in a smaller 2ft seahorse tank..

but u need to be really careful, and its a risk.. especially there's livestocks in the tank..

I did the same thing. Got a diamond drill bit to make the hole. can be done. tank was 6mm thick. haven't tried on anything thicker though.

[dfstan]

why not use overflow box? that's what i use for my rsm.

[dnsfpl]

got myself a tank with holes

problem solve

thanks all