Jump to content

Which to select? AP701 or SM200??


zaiqiu
 Share

Recommended Posts

Hi Guys,

Appreciate some advice.

Am looking for a insump skimmer for my new 5x2x2 tank.

Undecided between Deltec AP701 or the Royal Exclusiv SuperMarines 200.

Deltec is $650 cheaper!! Understand Bubble King is the Skimmer Roll-Royce :rolleyes:

Wonder whether it is really worth that extra $$... :unsure:

Comment is most welcome. :bow:

Link to comment
Share on other sites

Bro, i think both are proven and very hard to say which is better. However, if you talk about power consumption, i think BK will have upper hand than Deltec. If money is not an issue, then go for BK, otherwise just go for deltec and spend the saving elsewhere. Just my 2 cents worth of opinion. Thanks.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

another thing....study the maintenance....hehehe.....u will know .....maybe not an issue to you.... : )

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Bro, i think both are proven and very hard to say which is better. However, if you talk about power consumption, i think BK will have upper hand than Deltec. If money is not an issue, then go for BK, otherwise just go for deltec and spend the saving elsewhere. Just my 2 cents worth of opinion. Thanks.

I would think in terms of performance, BK is better.

But whether does it deserves the price delta....

Esp the price delta can get me a MP40W pump :rolleyes:

Did some simple calculation:

Assume price difference of $550 between the 2 (after discount :eyebrow: )

New electrical tariff of $0.3045/kwh

AP701 using 1260 pump (65w) and needs feed pump (say 10w AB1000)

Total power is 75w vs SM200 using 35w.

Every day, AP701 would consume 40/1000 x 24 x $0.3045 =~ $0.30

To be on par in cost would need (550/0.30)/365 = 5 years!!

:whistle

Link to comment
Share on other sites

hehehe......at times.....buying something cannot be too rational......why buy rolex if one casio can function the same.....lol

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Bro, use gravity feed....than it will take more years to recover the saving.......it boils down to your willingness to spend........

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Bro, use gravity feed....than it will take more years to recover the saving.......it boils down to your willingness to spend........

Heard that to achieve the optimum performance with deltec, the water feed supply should be constant.

Best is to have additional feed pump rather than doing the gravity feed.... :unsure:

Furthermore additional 10w doesnt make much difference :eyebrow:

Link to comment
Share on other sites

hehehe......at times.....buying something cannot be too rational......why buy rolex if one casio can function the same.....lol

ppl wear rolex so that others can see......

skimmer put in sump, inside cabinet....

cant see also :paiseh:

Link to comment
Share on other sites

haha....ppl already know you getting deltec or Bk....wahaha.....Know ppl who use gravity feed and successful .....maybe can get their advice.

any test to compare their skimming and to determine one is more superior than the other? Will be interested to know how the test was conducted and result...

Need more BK users in singapore.....hehehe....GO for BK.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

haha....ppl already know you getting deltec or Bk....wahaha.....Know ppl who use gravity feed and successful .....maybe can get their advice.

any test to compare their skimming and to determine one is more superior than the other? Will be interested to know how the test was conducted and result...

Need more BK users in singapore.....hehehe....GO for BK.

Seem like there arent many BK users in Singapore. Mainly due to the distributor rights.

Finally RD managed to obtain the rights to bring in to SG.

Hence not much feedback/comment from BK users in Singapore.

Only found a few threads in reef central......

Link to comment
Share on other sites

  • SRC Member

bro ur post already seem to imply that u are more incline to Deltec, then just get it in case after getting BK u tell urself aiyah just liddat ar.

Mix Reef Tank: 5ft x 2.5ft x 2ft mixed reef

Chiller: daikin 1hp compressor

Return: Red Dragon 6.5m3

Lighting: Aqua Lumen Ocean 4ft

Skimmer: Reef Octopus RO-RPS-5000-EXT w/ Bubble Blaster

CR: RM 824 /milwakee PH controller

Tunze TS24 with 7096

Tunze Osmolator

American Pinpoint PH monitor

American Pinpoint ORP Monitor with Resun Ozone

RM sulphur denitrator

RM FR 424

RM FR 624

TLF Phosban Reactor

My old tank thread

469748_10150741487628605_529506809_o_zps36d5c396.jpg

Link to comment
Share on other sites

bro ur post already seem to imply that u are more incline to Deltec, then just get it in case after getting BK u tell urself aiyah just liddat ar.

Ya main driving force is the cheaper cost.....

But SM200 really tempting :eyebrow:

Seems like with broader neck, it's able to extract nutrients more efficiently.... :rolleyes:

Link to comment
Share on other sites

  • SRC Member

ok i got a suggestion for u, get the BK 1st then if u find not gd enuff sell lor

or better still get both so u can compare, then see if the BK is worth it not

Mix Reef Tank: 5ft x 2.5ft x 2ft mixed reef

Chiller: daikin 1hp compressor

Return: Red Dragon 6.5m3

Lighting: Aqua Lumen Ocean 4ft

Skimmer: Reef Octopus RO-RPS-5000-EXT w/ Bubble Blaster

CR: RM 824 /milwakee PH controller

Tunze TS24 with 7096

Tunze Osmolator

American Pinpoint PH monitor

American Pinpoint ORP Monitor with Resun Ozone

RM sulphur denitrator

RM FR 424

RM FR 624

TLF Phosban Reactor

My old tank thread

469748_10150741487628605_529506809_o_zps36d5c396.jpg

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...