parc53 Posted March 19, 2009 Share Posted March 19, 2009 You can get from me Hi Sherman, Is this driver connected directly to the 230 VAC mains or to a 24 VDC transformer ? Quote Link to comment Share on other sites More sharing options...
sherman Posted March 21, 2009 Author Share Posted March 21, 2009 Hi Sherman, Is this driver connected directly to the 230 VAC mains or to a 24 VDC transformer ? This driver connect directly to your wall socket or 230 vac. The output connect directly to your LED panel Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
SRC Member dachkie Posted March 21, 2009 SRC Member Share Posted March 21, 2009 bro so how ur led set coming along? no more testing done? Quote Mix Reef Tank: 5ft x 2.5ft x 2ft mixed reef Chiller: daikin 1hp compressor Return: Red Dragon 6.5m3 Lighting: Aqua Lumen Ocean 4ft Skimmer: Reef Octopus RO-RPS-5000-EXT w/ Bubble Blaster CR: RM 824 /milwakee PH controller Tunze TS24 with 7096 Tunze Osmolator American Pinpoint PH monitor American Pinpoint ORP Monitor with Resun Ozone RM sulphur denitrator RM FR 424 RM FR 624 TLF Phosban Reactor My old tank thread Link to comment Share on other sites More sharing options...
sherman Posted March 22, 2009 Author Share Posted March 22, 2009 Last few days just test the first batch of LEDs on PCB from initial production. Do some tuning and will be running another batch next week. Also just complete the design of the PWM. Will be running the production concurrently. This morning just complete the algae scrubber LED light. Will post some picture later tonite Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sherman Posted March 22, 2009 Author Share Posted March 22, 2009 Just complete the LED light for the algae scrubber project. The Red and Blue LED Panel for algae scrubber Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sherman Posted March 22, 2009 Author Share Posted March 22, 2009 The algae scrubber in the sump compartment. Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
hammy Posted March 23, 2009 Share Posted March 23, 2009 in my search to DIY LED, i found a lot interesting gadget... these LEB is really super powerful... for home use actually, but tested on my tank, really almost equivalent to MH minus the heat but super super powerful Quote 2x1.5x1.5 tank Lighting: AI hydra 52HD Skimmer: Deltec SC 1455 Reactor: Minimax; rowaphos Skimz ; NP biopellets Wave Maker: MP 40 WQD Return pump: Eheim 1262 Chiller: Arctica 1/10 hp A righteous man cares for the needs of his animal, but the kindest acts of the wicked are cruel -- Proverbs 12:10 Link to comment Share on other sites More sharing options...
hammy Posted March 23, 2009 Share Posted March 23, 2009 single unit LED of 3W... wa kaoz, really blow my mind away while testing on my tank just now Quote 2x1.5x1.5 tank Lighting: AI hydra 52HD Skimmer: Deltec SC 1455 Reactor: Minimax; rowaphos Skimz ; NP biopellets Wave Maker: MP 40 WQD Return pump: Eheim 1262 Chiller: Arctica 1/10 hp A righteous man cares for the needs of his animal, but the kindest acts of the wicked are cruel -- Proverbs 12:10 Link to comment Share on other sites More sharing options...
hammy Posted March 23, 2009 Share Posted March 23, 2009 just when u thought it is just a normal light bulb... it is a LED light bulb with 9w consumption Quote 2x1.5x1.5 tank Lighting: AI hydra 52HD Skimmer: Deltec SC 1455 Reactor: Minimax; rowaphos Skimz ; NP biopellets Wave Maker: MP 40 WQD Return pump: Eheim 1262 Chiller: Arctica 1/10 hp A righteous man cares for the needs of his animal, but the kindest acts of the wicked are cruel -- Proverbs 12:10 Link to comment Share on other sites More sharing options...
hammy Posted March 23, 2009 Share Posted March 23, 2009 this is the second best ... Quote 2x1.5x1.5 tank Lighting: AI hydra 52HD Skimmer: Deltec SC 1455 Reactor: Minimax; rowaphos Skimz ; NP biopellets Wave Maker: MP 40 WQD Return pump: Eheim 1262 Chiller: Arctica 1/10 hp A righteous man cares for the needs of his animal, but the kindest acts of the wicked are cruel -- Proverbs 12:10 Link to comment Share on other sites More sharing options...
hammy Posted March 23, 2009 Share Posted March 23, 2009 my friend is from LED company for those jewellery compary like meyson where they required good lighting to shine diamond , so ask him to try out some stuff for my home aquarium.... LED is seriously the way to go . Quote 2x1.5x1.5 tank Lighting: AI hydra 52HD Skimmer: Deltec SC 1455 Reactor: Minimax; rowaphos Skimz ; NP biopellets Wave Maker: MP 40 WQD Return pump: Eheim 1262 Chiller: Arctica 1/10 hp A righteous man cares for the needs of his animal, but the kindest acts of the wicked are cruel -- Proverbs 12:10 Link to comment Share on other sites More sharing options...
sherman Posted March 24, 2009 Author Share Posted March 24, 2009 You are right Bro. Save the earth and save your bill Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sherman Posted March 24, 2009 Author Share Posted March 24, 2009 The 680mA constant current driver will be in this weekend. If you need them and you still have not place reservation try to place order before all is taken up. So far 60% is under reservation. Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
jackryan Posted March 24, 2009 Share Posted March 24, 2009 in my search to DIY LED, i found a lot interesting gadget... these LEB is really super powerful... for home use actually, but tested on my tank, really almost equivalent to MH minus the heat but super super powerful Nice! Where did you get this from? How much? Quote Link to comment Share on other sites More sharing options...
sherman Posted March 25, 2009 Author Share Posted March 25, 2009 You can find most of them on internet, Sim Lim Tower and some lighting shop. There are expensive. Mostly from Taiwan,China and Hong Kong. Either come in cool white or warm white. Not much choice for color spectrum. You can also get brand like Orsam or Philip. But they are more expensive than those in Sim Lim Cheers Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
RockyBoy Posted March 25, 2009 Share Posted March 25, 2009 my friend is from LED company for those jewellery compary like meyson where they required good lighting to shine diamond , so ask him to try out some stuff for my home aquarium....LED is seriously the way to go . Yes.. LED is way to go, bro.. Quote Member of : UEN: T08SS0098FMASS in Facebook Reefing in LED Link to comment Share on other sites More sharing options...
SRC Member BarraCudaTM Posted March 25, 2009 SRC Member Share Posted March 25, 2009 I got the 15W version of the E27 screw in LED bulb, not suitable for corals. Quote Link to comment Share on other sites More sharing options...
hammy Posted March 25, 2009 Share Posted March 25, 2009 I got the 15W version of the E27 screw in LED bulb, not suitable for corals. all the gadget are build for home purposes =) i just find that technology has improved ... FL-PL-T5&(MH)_LED i dunno where to find.. he told me those gadget is from the US... how true i am not too sure leh something i am very sure, superduper poweful.. no luxmeter, only my eyes as tester lah Quote 2x1.5x1.5 tank Lighting: AI hydra 52HD Skimmer: Deltec SC 1455 Reactor: Minimax; rowaphos Skimz ; NP biopellets Wave Maker: MP 40 WQD Return pump: Eheim 1262 Chiller: Arctica 1/10 hp A righteous man cares for the needs of his animal, but the kindest acts of the wicked are cruel -- Proverbs 12:10 Link to comment Share on other sites More sharing options...
sherman Posted March 27, 2009 Author Share Posted March 27, 2009 all the gadget are build for home purposes =)i just find that technology has improved ... FL-PL-T5&(MH)_LED i dunno where to find.. he told me those gadget is from the US... how true i am not too sure leh something i am very sure, superduper poweful.. no luxmeter, only my eyes as tester lah Our eyes cannot read us the light intensity correctly. Many people find out after they buy what they think look super bright to their eyes. Then when they set the light up in their tank they found it actually cannot meet their minimum requirement Cheers Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
SRC Member Oceandeep Posted March 28, 2009 SRC Member Share Posted March 28, 2009 bro, the lens clear or non-clear better?? As today I went to sim lim tower.. they selling a clear lens... Quote Link to comment Share on other sites More sharing options...
Jameshong Posted March 28, 2009 Share Posted March 28, 2009 bro, the lens clear or non-clear better?? As today I went to sim lim tower.. they selling a clear lens... How much they sell the clear len? Quote Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe Link to comment Share on other sites More sharing options...
sherman Posted March 28, 2009 Author Share Posted March 28, 2009 bro, the lens clear or non-clear better?? As today I went to sim lim tower.. they selling a clear lens... Not much different. I try before and the intensity measurement is the same Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sherman Posted March 28, 2009 Author Share Posted March 28, 2009 The offer 680 mA constant current driver are all taken up by today afternoon. Others who had place their order will receive them by the next shipment in mid April. Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
SRC Member Oceandeep Posted March 28, 2009 SRC Member Share Posted March 28, 2009 How much they sell the clear len? they have small size(same as Sheman selling) and big Quote Link to comment Share on other sites More sharing options...
SRC Member Oceandeep Posted March 28, 2009 SRC Member Share Posted March 28, 2009 Not much different.I try before and the intensity measurement is the same bro, when the next batch comin?? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.