Jump to content

LED Panel

sherman

By sherman,
in DIY Forum

 Share

Recommended Posts

  • SRC Member
Zac Contributor

Zac

Posted
  • SRC Member
Posted
Bro,

For this no need to DIY.

Just buy a mogul socket same as MH and fix it up .

Then connect to your power supply and it just work.

Regards

Sherman

bro sorry can i asked a stupid qns ? ;p wats a mogul socket? and wats are the list of stuff that i need to buy to make a led bulb? :thanks:

Zac's Red Sea Reefer 170

Link to comment
Share on other sites
  • Replies 1k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

sherman
sherman

Should be the shop at the basement.

sherman
sherman

That is all for today. Tmrl we continue to on light adsorption by zooxanthellae.

sherman
sherman

Red light is of very little use for most coral. Unless you are keeping corals collected near the surface of the sea. Violet and ultraviolet is the portion of light that really penetrate deep

Posted Images

  • SRC Member
Oceandeep Newbie

Oceandeep

Posted
  • SRC Member
Posted
Do they have spec like model, wattage, current, par range,etc?

Anyway which shop you get from.

Regards

Well.. they do not have any spec. But I did ask them about the spec.

is 120 - 180 deg view angle, 3W, current is 0.25A

The shop is at 3rd floor, and the owner is from Hong kong.

The basement shop(next to staircase) selling at S$85 for 12 piece.

Link to comment
Share on other sites
  • SRC Member
mousecat11 Newbie

mousecat11

Posted
  • SRC Member
Posted
Well.. they do not have any spec. But I did ask them about the spec.

is 120 - 180 deg view angle, 3W, current is 0.25A

The shop is at 3rd floor, and the owner is from Hong kong.

The basement shop(next to staircase) selling at S$85 for 12 piece.

How many bulb is there ? it seem like even to get a good sets of LEDs for D.I.Y is going to be costly as well...

My 2ft Tank

Tank specification ;

1) 8 mm glass with external overflow tank

2) 8 mm sump tank

3) Main return pump - AB 3000 ( 45 W )

4) Chiller main return pump - AB 2000i ( 18 W )

5) Chiller - Artica titanium chiller 1/10 HP ( 75 W)

6) Wave maker - tunze 6206 nano wavebox ( 10 W only ! )

7) Skimmer - H & S skimmer with AB needle wheel ( 18 W )

8) CR - RM Calcium reactor with AB 1000 ( 10W )

9) Denitirator - RM suplur Dnitirator with maxi jet pump ( 12 W )

10 ) Lighting - Lumen Auqa LED lighting ( 48 W only ! )

11) Hailei ozone generator ( 7 W )

12) Oceanus 2 x 2ft LED lighting ( 14 W) for chaeto planting

13) Tunze 6025 ( 6 W)

14) Skimz FR with rowa

TOTAL ; 263 W !!!

Link to comment
Share on other sites
sherman Enthusiast

sherman

Posted
  • Author
Posted

ok.Thank You bro.

How many led you buy?

You buy any driver or just connect direct to power supply

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites
  • SRC Member
BarraCudaTM Newbie

BarraCudaTM

Posted
  • SRC Member
Posted
Well.. they do not have any spec. But I did ask them about the spec.

is 120 - 180 deg view angle, 3W, current is 0.25A

The shop is at 3rd floor, and the owner is from Hong kong.

The basement shop(next to staircase) selling at S$85 for 12 piece.

hrmm .. 250mA sounds weird. I drive my Luxeon V at 700mA and K2 at 1000mA. Typical Luxeon III are driven at 700mA.

You might have bought a luxeon I which is a 1watt LED.

You will need a current regulated powersupply not voltage regulated like normal transformers

Link to comment
Share on other sites
  • SRC Member
ming69 Newbie

ming69

Posted
  • SRC Member
Posted
Well.. they do not have any spec. But I did ask them about the spec.

is 120 - 180 deg view angle, 3W, current is 0.25A

The shop is at 3rd floor, and the owner is from Hong kong.

The basement shop(next to staircase) selling at S$85 for 12 piece.

Bro, can show us what u bought? :thanks:

Member of:

n34281892381_7606.jpg

Link to comment
Share on other sites
Jameshong Newbie

Jameshong

Posted
Posted
Well.. they do not have any spec. But I did ask them about the spec.

is 120 - 180 deg view angle, 3W, current is 0.25A

The shop is at 3rd floor, and the owner is from Hong kong.

The basement shop(next to staircase) selling at S$85 for 12 piece.

Angle wise is ok. Try to get 0.75 ~ 1A , 3 watt LED.

post-1182-049500100201281969137_thumb.gi

Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe

Link to comment
Share on other sites
  • SRC Member
BarraCudaTM Newbie

BarraCudaTM

Posted
  • SRC Member
Posted
after read thru the datasheet..

http://www.philipslumileds.com/pdfs/AB11-A.PDF

it mention, if no heatsink is attach together, the current will

never over 0.3A, therefore is correct.

And also base on the photo, the LED I got was Luxeon V.

Luxeon V actually have 4 dies inside, please take a closer look. Luxeon V are also very expensive so not likely you will get 1 at that price.

Link to comment
Share on other sites
  • SRC Member
ming69 Newbie

ming69

Posted
  • SRC Member
Posted

Do u think a panel with 25 x 3w LEDs (combination of blues and white) will be able to replace a MH 150w light?

W W B W W

W B W B W

B W B W W

W B W B W

W W B W W

16 whites & 9 blues

or 17 whites & 8 blues

W W B W W

W B W B W

B W W W B

W B W B W

W W B W W

OR 19 whites & 6 blues

B W W W B

W W B W W

W B B B W

W W B W W

B W W W B

which combination would be better?

Member of:

n34281892381_7606.jpg

Link to comment
Share on other sites
sherman Enthusiast

sherman

Posted
  • Author
Posted
i FOUND ON THE WEB.

It say for plant and aquarium.

But do not know if good.

So checking if anyone has see or use before.

If good maybe will order

This LED Panel has 108 LEDs

post-669-1225598424.jpg

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites
sherman Enthusiast

sherman

Posted
  • Author
Posted

36 (blue) + 72 (White) = 108 pieces (White+Blue 12000 to 14000K)

Look impressive but only 48 watts

post-669-1225598784.jpg

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites
sherman Enthusiast

sherman

Posted
  • Author
Posted

How about this?

post-669-1225606679.jpg

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites
sherman Enthusiast

sherman

Posted
  • Author
Posted

Product Information

This MR16 utilizes 3X1.5W SSC LED that is capable of producing up to 300 Lumen (about a 20 watt halogen or 35 watt incandescent bulb). In addition, we use a constant current driver making this bulb more efficient and more reliable.The body is made on cast aluminum that releases the heat from the LED and the driver. Finally, the optical grade polycarbonate collimator allows light transmission at 45°beam angle.

This bulb is available in 3000K (warm white) and 6000K (cool white).

Be careful what you read about the 2x3 watt or 3x3 watt MR16. The body of the MR16 is just too small to release the heat generated by the LED. As a result, it shorten the life and reduce the light output of the LED.

LED bulbs are compatible with all types of magnetic transformers but not all electronic transformers. Many electronic transformers require a minimum load which is greater than that provided by LED bulbs. LED bulbs will usually not work properly (no light output, flickering, and strobing) in fixtures that have integral electronic transformers in each fixture. We recommend changing the power LED power supply which can be purchase in our website.

In addition, many standard Track Light power supplies will produce voltages as high as 16 with little or no load (LED bulbs provide little load). You must make sure that the voltage of your existing power supply does not exceed 14 Volts with the LED bulbs installed.

Specifications

Bulb Type MR16 3x 1.5 Watt SSC LED GX 5.3 Base

Life time 50,000 Hours

Color White (6000K)

View Angle 45 Deg

Light output 240-300 Lumen (about 20 watt of a halogen)

Operating Voltage 12 V AC / DC

Consumption 4.5 Watt

Product Diameter 1.96" or 50 mm

Product Length 1.9" or 48 ml

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites
sherman Enthusiast

sherman

Posted
  • Author
Posted

Got some LED from Seoul semicon through a friend

1 w and 4 w LED

Do some DIY and test out.

See pictures below

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites
sherman Enthusiast

sherman

Posted
  • Author
Posted

The 4 w led on the left and the diy with self turn heat sink.

This is direct ac LED

post-669-1226237777.jpg

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites
  • SRC Member
markietan Newbie

markietan

Posted
  • SRC Member
Posted
Got some LED from Seoul semicon through a friend

1 w and 4 w LED

Do some DIY and test out.

See pictures below

can't see your picture.. think u nv attach properly.

how about this one? chanced upon it on another site

http://store.lsgc.com/SoL-R38-P50.aspx

:DECOMMED 5ft shallow tank:
:DECOMMED 3ft tank:
:DECOMMED 2ft nano tank:

:4ft Balcony Tank:

Link to comment
Share on other sites
sherman Enthusiast

sherman

Posted
  • Author
Posted

Testing after assembly

post-669-1226237883.jpg

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites
  • SRC Member
markietan Newbie

markietan

Posted
  • SRC Member
Posted
can't see your picture.. think u nv attach properly.

how about this one? chanced upon it on another site

http://store.lsgc.com/SoL-R38-P50.aspx

this one also quite cool

http://www.journeelighting.com/products/luminaires

:DECOMMED 5ft shallow tank:
:DECOMMED 3ft tank:
:DECOMMED 2ft nano tank:

:4ft Balcony Tank:

Link to comment
Share on other sites
sherman Enthusiast

sherman

Posted
  • Author
Posted
can't see your picture.. think u nv attach properly.

how about this one? chanced upon it on another site

http://store.lsgc.com/SoL-R38-P50.aspx

Sori I mean picture in the post after this post

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites
sherman Enthusiast

sherman

Posted
  • Author
Posted

Testing in my study room

post-669-1226238170.jpg

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites
sherman Enthusiast

sherman

Posted
  • Author
Posted

Testing next to my T5.

Left side 4 w led right side 2*24 w T5HO

post-669-1226238358.jpg

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Hailea HS66a Chiller

      Internal temperature probe still working well. $180 Self collect at Katong Sent from my iPhone using Tapatalk
      beachman in Sell off/Pasar Malam Shop
    2. 0

      Selling the following Items

      Selling the following items below. Hailea HK-150A Chiller, 1/10hp including OASE Pump @ $250. Eheim 12/16mm Hose (3m Length)- Brand New and keep as spare @ $12. Vortech MP10QD @ $350. Anemone Guard (Compatible for Vortech MP10) @ $20. Jebao Wifi Doser MD 4.4. Dosing Tube (4m Length). Acrylic Dosing Tube Holder @ $10. DD Compact ATO Unit @ $70. Acrylic Reservoir 5litres @ $50. Tunze Magnet Care Nano 0220.010. Redsea Complete 4-part Supplement Program - Brand New and keep as spare @ $95. Redsea Dosing Tube (4 ea) - Brand New and keep as spare @ $25. Salifert (KH) Test Kit - Expiry Date: 03/2028 @ $16. Salifert (CA) Test Kit - Expiry Date: 03/2028 @ $28. API Ammonia NH3/NH4 Test Kit - Expiry Date: 07/2027 @ $14. Fauna Marin Min S - Liquid Coral Food (1000ml) - Expiry Date: 04/2026 - 90% Balance @ $70. Interested, please PM me. All items ready for collection @ Jurong
      DS868 in Sell off/Pasar Malam Shop
    3. 0

      WTG Chaeto

      Collection 523608 Sent from my FCP-N49 using Tapatalk
      Jimbo in Sell off/Pasar Malam Shop
    4. 1

      WTS Livestock

      Yellow Wrasse sold to a friendly reefer. Left with: 1. Lumi Green Japanese Toadstool Coral at $60 2. Neon Green Kenya Tree at $50 (about 4 stems with many heads) 3. 1x blue tuxedo Urchin $8 Take all 3 for $100!
      jellyfish8 in Sell off/Pasar Malam Shop
    5. 1

      Wtb AC ADAPTER

      Item found
      Rseady in Sell off/Pasar Malam Shop
×
×
  • Create New...